Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 2
Default Please help! Excel Novice here

I have to complete this assignment in the next few hours and have no idea
where to begin....any help would be sincerely appreciated.

Here it is:

A man has 5 years remaining on a six year car loan, his interest rate is 8.25%

and his monthly payment is $525.00. His credit union is willing to accept the
present value (PV) of the loan as a payoff. Develop an amortization schedule
that shows how much he must pay at the end of each of the six years. Then
create a worksheet that includes the beginning and ending balance, the amount
paid on the principal and the interest paid for years two through six.
Because he has paid for the first year already, determine only the ending
balance (present value) for year one.

I know this may come easy to someone but I am completely lost here. Please
help!

Thanks a million
Theresa

  #2   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 3,942
Default Please help! Excel Novice here

hi.
see your post under gen questions.

Regards
FSt1

"Theresa" wrote:

I have to complete this assignment in the next few hours and have no idea
where to begin....any help would be sincerely appreciated.

Here it is:

A man has 5 years remaining on a six year car loan, his interest rate is 8.25%

and his monthly payment is $525.00. His credit union is willing to accept the
present value (PV) of the loan as a payoff. Develop an amortization schedule
that shows how much he must pay at the end of each of the six years. Then
create a worksheet that includes the beginning and ending balance, the amount
paid on the principal and the interest paid for years two through six.
Because he has paid for the first year already, determine only the ending
balance (present value) for year one.

I know this may come easy to someone but I am completely lost here. Please
help!

Thanks a million
Theresa


  #4   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 524
Default Please help! Excel Novice here

Check one of your identical posts in other newsgroups.

You start off with one strike because you ought to be doing your own
homework. I (and others, I'm sure) are willing to *help*, but not to
do your homework *for* you. "I don't know where to start", from a
student, usually means "I haven't spent more than a millisecond
thinking about this problem." If you've been paying *any* attention
to your course, there's always something you can do to get started.
So you do that, and then look at the next bit of information in the
problem and see how you can use that. Before you know it, you've
either finished the problem or at least narrowed things down to a
specific question.

But by posting multiple copies you just increase the annoyance level
and reduce people's inclination to help you.

Sun, 13 May 2007 02:06:20 GMT from Theresa <u34137@uwe:
I have to complete this assignment in the next few hours and have no idea
where to begin....any help would be sincerely appreciated.

Here it is:

A man has 5 years remaining on a six year car loan, his interest rate is 8.25%

and his monthly payment is $525.00. His credit union is willing to accept the
present value (PV) of the loan as a payoff. Develop an amortization schedule
that shows how much he must pay at the end of each of the six years. Then
create a worksheet that includes the beginning and ending balance, the amount
paid on the principal and the interest paid for years two through six.
Because he has paid for the first year already, determine only the ending
balance (present value) for year one.

I know this may come easy to someone but I am completely lost here. Please
help!

Thanks a million
Theresa



--
Stan Brown, Oak Road Systems, Tompkins County, New York, USA
http://OakRoadSystems.com/
  #5   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 9
Default Please help! Excel Novice here

Sorry, I was in a panic and didn't read the rules before I began. Shame on me,
I'm human, make mistakes. That being said. it truly amazes me how people can
make snap judgements of others. You know nothing of my situation and truly
your lovely attitude has given me no reason to disclose any more details of
it to you. I will tell you that I am a 42 year old college student with a
damn good GPA but my experience has not been in Excel Spreadsheets. If I knew
how to do any part of it, I would have tried to convey that in my message.
Thanks for your very understanding and helpful attitude. I thought this was a
forum where help could be found, I guess judgement is an added benefit.

Stan Brown wrote:
Check one of your identical posts in other newsgroups.

You start off with one strike because you ought to be doing your own
homework. I (and others, I'm sure) are willing to *help*, but not to
do your homework *for* you. "I don't know where to start", from a
student, usually means "I haven't spent more than a millisecond
thinking about this problem." If you've been paying *any* attention
to your course, there's always something you can do to get started.
So you do that, and then look at the next bit of information in the
problem and see how you can use that. Before you know it, you've
either finished the problem or at least narrowed things down to a
specific question.

But by posting multiple copies you just increase the annoyance level
and reduce people's inclination to help you.

Sun, 13 May 2007 02:06:20 GMT from Theresa <u34137@uwe:
I have to complete this assignment in the next few hours and have no idea
where to begin....any help would be sincerely appreciated.

[quoted text clipped - 16 lines]
Thanks a million
Theresa



--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1



  #6   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 22,906
Default Please help! Excel Novice here

Theresa

Please do not paint us all with the same brush.

Stan must be having a bad hair day or something.

His response over in the excel.misc group is rude and judgemental and attacks
your personal character in a way that is unacceptable to me.

He has gone to the "plonk" list on my news reader.


Gord Dibben MS Excel MVP

On Sun, 13 May 2007 14:53:59 GMT, "Theresa via OfficeKB.com" <u34137@uwe wrote:

Sorry, I was in a panic and didn't read the rules before I began. Shame on me,
I'm human, make mistakes. That being said. it truly amazes me how people can
make snap judgements of others. You know nothing of my situation and truly
your lovely attitude has given me no reason to disclose any more details of
it to you. I will tell you that I am a 42 year old college student with a
damn good GPA but my experience has not been in Excel Spreadsheets. If I knew
how to do any part of it, I would have tried to convey that in my message.
Thanks for your very understanding and helpful attitude. I thought this was a
forum where help could be found, I guess judgement is an added benefit.

Stan Brown wrote:
Check one of your identical posts in other newsgroups.

You start off with one strike because you ought to be doing your own
homework. I (and others, I'm sure) are willing to *help*, but not to
do your homework *for* you. "I don't know where to start", from a
student, usually means "I haven't spent more than a millisecond
thinking about this problem." If you've been paying *any* attention
to your course, there's always something you can do to get started.
So you do that, and then look at the next bit of information in the
problem and see how you can use that. Before you know it, you've
either finished the problem or at least narrowed things down to a
specific question.

But by posting multiple copies you just increase the annoyance level
and reduce people's inclination to help you.

Sun, 13 May 2007 02:06:20 GMT from Theresa <u34137@uwe:
I have to complete this assignment in the next few hours and have no idea
where to begin....any help would be sincerely appreciated.

[quoted text clipped - 16 lines]
Thanks a million
Theresa



  #7   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 9
Default Please help! Excel Novice here

I appreciate your comment. I generally do not judge a group by one individual
member and that is not the case today. Thanks for the supportive attitude.
Tee

Gord Dibben wrote:
Theresa

Please do not paint us all with the same brush.

Stan must be having a bad hair day or something.

His response over in the excel.misc group is rude and judgemental and attacks
your personal character in a way that is unacceptable to me.

He has gone to the "plonk" list on my news reader.

Gord Dibben MS Excel MVP

Sorry, I was in a panic and didn't read the rules before I began. Shame on me,
I'm human, make mistakes. That being said. it truly amazes me how people can

[quoted text clipped - 28 lines]
Thanks a million
Theresa


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1

  #8   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 3,365
Default Please help! Excel Novice here

I'll second Gord in saying that the personal attack was uncalled for.
Although the pieces in between are rather good advice, or come from bad
experiences in trying to help students in the past. As Gord said - chalk it
up to a bad hair day.

It is definitely actually a wise move for anyone asking for help to try in
one location - it helps all concerned:
You - because you can see all help provided in one location, and
Those trying to help since they can see the progress of help to date and
don't have to backtrack or cover ground that's already been covered.

It's not just true here. I have helped moderate a rather large site for
about 7 years now and that's the advice we give to folks looking for
assistance there also. In this case, it's a good thing to put all your eggs
into one basket unless you don't get any results at all in a reasonable
amount of time. What's reasonable? Around here, if you haven't gotten a
response within 24 hours, it's probably safe to try another group - and it
helps if you mention at that time that you tried elsewhere and received no
responses, AND go back to the other location and respond to yourself with
something like "am trying for help here now: insert link to new post - if you
have any help for me, please reply there" -- again it helps keep all the
questions/answers/progress in one neat pile.

"Theresa via OfficeKB.com" wrote:

I appreciate your comment. I generally do not judge a group by one individual
member and that is not the case today. Thanks for the supportive attitude.
Tee

Gord Dibben wrote:
Theresa

Please do not paint us all with the same brush.

Stan must be having a bad hair day or something.

His response over in the excel.misc group is rude and judgemental and attacks
your personal character in a way that is unacceptable to me.

He has gone to the "plonk" list on my news reader.

Gord Dibben MS Excel MVP

Sorry, I was in a panic and didn't read the rules before I began. Shame on me,
I'm human, make mistakes. That being said. it truly amazes me how people can

[quoted text clipped - 28 lines]
Thanks a million
Theresa


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1


  #9   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 2,886
Default Please help! Excel Novice here

Jerry, that's very sound advice for any poster.

Theresa, I also deplore the savage attack on you, for which I note that
Stan has subsequently apologised.
Please do come back to the NG's with more questions, when you feel
necessary, following the advice given by Jerry.
Most of the regulars scan each of the NG's hence your question is likely
to get "picked up" no matter which group you decide to choose for your
single posting.

--
Regards

Roger Govier


"JLatham" <HelpFrom @ Jlathamsite.com.(removethis) wrote in message
...
I'll second Gord in saying that the personal attack was uncalled for.
Although the pieces in between are rather good advice, or come from
bad
experiences in trying to help students in the past. As Gord said -
chalk it
up to a bad hair day.

It is definitely actually a wise move for anyone asking for help to
try in
one location - it helps all concerned:
You - because you can see all help provided in one location, and
Those trying to help since they can see the progress of help to date
and
don't have to backtrack or cover ground that's already been covered.

It's not just true here. I have helped moderate a rather large site
for
about 7 years now and that's the advice we give to folks looking for
assistance there also. In this case, it's a good thing to put all
your eggs
into one basket unless you don't get any results at all in a
reasonable
amount of time. What's reasonable? Around here, if you haven't
gotten a
response within 24 hours, it's probably safe to try another group -
and it
helps if you mention at that time that you tried elsewhere and
received no
responses, AND go back to the other location and respond to yourself
with
something like "am trying for help here now: insert link to new post -
if you
have any help for me, please reply there" -- again it helps keep all
the
questions/answers/progress in one neat pile.

"Theresa via OfficeKB.com" wrote:

I appreciate your comment. I generally do not judge a group by one
individual
member and that is not the case today. Thanks for the supportive
attitude.
Tee

Gord Dibben wrote:
Theresa

Please do not paint us all with the same brush.

Stan must be having a bad hair day or something.

His response over in the excel.misc group is rude and judgemental
and attacks
your personal character in a way that is unacceptable to me.

He has gone to the "plonk" list on my news reader.

Gord Dibben MS Excel MVP

Sorry, I was in a panic and didn't read the rules before I began.
Shame on me,
I'm human, make mistakes. That being said. it truly amazes me how
people can
[quoted text clipped - 28 lines]
Thanks a million
Theresa


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1




  #10   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 9
Default Please help! Excel Novice here

Apologized to whom? I am not holding my breath on that one, he cast his
judgement and has never backed away from it or apologized for being insulting.


Roger Govier wrote:
Jerry, that's very sound advice for any poster.

Theresa, I also deplore the savage attack on you, for which I note that
Stan has subsequently apologised.
Please do come back to the NG's with more questions, when you feel
necessary, following the advice given by Jerry.
Most of the regulars scan each of the NG's hence your question is likely
to get "picked up" no matter which group you decide to choose for your
single posting.

I'll second Gord in saying that the personal attack was uncalled for.
Although the pieces in between are rather good advice, or come from

[quoted text clipped - 59 lines]
Thanks a million
Theresa


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1



  #11   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 10,124
Default Please help! Excel Novice here

I'm going to throw in my $.02 here..
1. Post with ONE name in ONE group ONLY. Those of us who help on a regular
basis read the majors like
excel, .misc. worksheetufnctions, programming.
2. Use a "meaningful" subject line such as "Financial Function"
3. Show us that YOU have made an effort to solve your own problem by posting
your code or formula attempts for comments and suggestions. We are not your
tutor and do NOT do homework. You learn by doing.
4. Stay in the original thread. If you are to get an answer you will get it
there.
5. Remember that we are unpaid volunteers that are also human.
http://www.cpearson.com/excel/newposte.htm

The comment made was NOT representative of comments here and is NOT to be
condoned. However, the frustration is understandable.



--
Don Guillett
SalesAid Software

"Theresa via OfficeKB.com" <u34137@uwe wrote in message
news:722a69332b062@uwe...
Apologized to whom? I am not holding my breath on that one, he cast his
judgement and has never backed away from it or apologized for being
insulting.


Roger Govier wrote:
Jerry, that's very sound advice for any poster.

Theresa, I also deplore the savage attack on you, for which I note that
Stan has subsequently apologised.
Please do come back to the NG's with more questions, when you feel
necessary, following the advice given by Jerry.
Most of the regulars scan each of the NG's hence your question is likely
to get "picked up" no matter which group you decide to choose for your
single posting.

I'll second Gord in saying that the personal attack was uncalled for.
Although the pieces in between are rather good advice, or come from

[quoted text clipped - 59 lines]
Thanks a million
Theresa


--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200705/1


  #12   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 22,906
Default Please help! Excel Novice here

Theresa

This quoted text from Stan's reply to Dave P. might be what Roger is referring
to when he says "apologized"

Quote.........................

Point Taken

In mitigation I'll plead that it was the combination of three things:
posting the same article in multiple newsgroups, posting it multiple
times with different subject lines in the same newsgroup, and the
expectation that we would do her homework for her with zero attempt
on her part to do it.

End quote............................

Looks more a rationalization for bad behaviour in my estimation.


Gord


On Mon, 14 May 2007 13:32:52 GMT, "Theresa via OfficeKB.com" <u34137@uwe wrote:

Apologized to whom? I am not holding my breath on that one, he cast his
judgement and has never backed away from it or apologized for being insulting.


Roger Govier wrote:
Jerry, that's very sound advice for any poster.

Theresa, I also deplore the savage attack on you, for which I note that
Stan has subsequently apologised.
Please do come back to the NG's with more questions, when you feel
necessary, following the advice given by Jerry.
Most of the regulars scan each of the NG's hence your question is likely
to get "picked up" no matter which group you decide to choose for your
single posting.

I'll second Gord in saying that the personal attack was uncalled for.
Although the pieces in between are rather good advice, or come from

[quoted text clipped - 59 lines]
Thanks a million
Theresa


  #13   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 2,886
Default Please help! Excel Novice here

Gord

I should have put the word "apologised" in quotes and put some
exclamations or question marks after it.
I meant it rather sarcastically, really, as I guess this is as far as
one is going to get towards an apology, from someone who can be that
scathing in an attack.
Like you, I have also added him to my "plonk" list.
--
Regards

Roger Govier


"Gord Dibben" <gorddibbATshawDOTca wrote in message
...
Theresa

This quoted text from Stan's reply to Dave P. might be what Roger is
referring
to when he says "apologized"

Quote.........................

Point Taken

In mitigation I'll plead that it was the combination of three things:
posting the same article in multiple newsgroups, posting it multiple
times with different subject lines in the same newsgroup, and the
expectation that we would do her homework for her with zero attempt
on her part to do it.

End quote............................

Looks more a rationalization for bad behaviour in my estimation.


Gord


On Mon, 14 May 2007 13:32:52 GMT, "Theresa via OfficeKB.com"
<u34137@uwe wrote:

Apologized to whom? I am not holding my breath on that one, he cast
his
judgement and has never backed away from it or apologized for being
insulting.


Roger Govier wrote:
Jerry, that's very sound advice for any poster.

Theresa, I also deplore the savage attack on you, for which I note
that
Stan has subsequently apologised.
Please do come back to the NG's with more questions, when you feel
necessary, following the advice given by Jerry.
Most of the regulars scan each of the NG's hence your question is
likely
to get "picked up" no matter which group you decide to choose for
your
single posting.

I'll second Gord in saying that the personal attack was uncalled
for.
Although the pieces in between are rather good advice, or come from
[quoted text clipped - 59 lines]
Thanks a million
Theresa




  #14   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 524
Default Please help! Excel Novice here

Mon, 14 May 2007 17:05:05 -0700 from <Gord Dibben
<gorddibbATshawDOTca:
Looks more a rationalization for bad behaviour in my estimation.


Then let me be more explicit: while there was provocation, I
overreacted to it, and I apologize for doing so.

--
Stan Brown, Oak Road Systems, Tompkins County, New York, USA
http://OakRoadSystems.com/
  #15   Report Post  
Posted to microsoft.public.excel.worksheet.functions
external usenet poster
 
Posts: 9
Default Please help! Excel Novice here

And I am seriously sorry that I did not read the rules. As I stated in my
response in another thread, I was panicked and did not take the time to read
them before I posted, I did apologize for that. I did not realize I was
"provoking" anyone at the time, I certainly am aware that my behavior
disturbed you, Mr. Brown. My intent was to get help, not screw up your day.
How ridiculous this is.

Stan Brown wrote:
Mon, 14 May 2007 17:05:05 -0700 from <Gord Dibben
<gorddibbATshawDOTca:
Looks more a rationalization for bad behaviour in my estimation.


Then let me be more explicit: while there was provocation, I
overreacted to it, and I apologize for doing so.


--
Message posted via http://www.officekb.com

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plz Help Microsoft Excel Novice hitec80 Excel Worksheet Functions 1 March 9th 06 02:34 AM
Plz Help Microsoft Excel Novice hitec80 New Users to Excel 1 March 9th 06 12:53 AM
Plz Help Microsoft Excel Novice hitec80 Excel Discussion (Misc queries) 1 March 9th 06 12:40 AM
Plz Help Microsoft Excel Novice hitec80 Excel Discussion (Misc queries) 1 March 9th 06 12:26 AM
I am novice at Excel, and don't know where to begin. L1L070 New Users to Excel 1 June 8th 05 02:44 PM


All times are GMT +1. The time now is 03:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 ExcelBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Excel"