Home Menu

Menu


ExcelBanter » Excel Newsgroups » Excel Programming > Almost there with procedure error
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
I have the following program to translate a single-column database into a
matrix with five columns. I get an error on the line:

startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)

I'm not sure what the problem is. I've tried re-arranging and doing some
different things, but can't figure it out. Any thoughts?

Thanks!

Mind text wrapping:

Option Explicit
Sub Save_Time()

Dim glcount, j, m, n As Integer
Dim startspot, nextspot As Range

j = 0

Set startspot = Range("A1") 'or wherever you start
Set nextspot = Range("A1")

Do
Set startspot = startspot.Offset(j, 0)
If nextspot = "" Then Exit Do
nextspot.Select
ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

Set nextspot = ActiveCell.Offset(4, 0)
nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
m = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(m, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 3)

nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
n = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(n, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 4)

j = j + Application.Max(n, m)

Loop

End Sub

Reply With QuoteReply With Quote
  #2   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
In case it helps, the single line database looks like the following:

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6


"StumpedAgain" wrote:

I have the following program to translate a single-column database into a
matrix with five columns. I get an error on the line:

startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)

I'm not sure what the problem is. I've tried re-arranging and doing some
different things, but can't figure it out. Any thoughts?

Thanks!

Mind text wrapping:

Option Explicit
Sub Save_Time()

Dim glcount, j, m, n As Integer
Dim startspot, nextspot As Range

j = 0

Set startspot = Range("A1") 'or wherever you start
Set nextspot = Range("A1")

Do
Set startspot = startspot.Offset(j, 0)
If nextspot = "" Then Exit Do
nextspot.Select
ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

Set nextspot = ActiveCell.Offset(4, 0)
nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
m = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(m, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 3)

nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
n = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(n, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 4)

j = j + Application.Max(n, m)

Loop

End Sub

Reply With QuoteReply With Quote
  #3   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 35,218
Default Almost there with procedure error
How long is the value in startspot when the code blows up?

What is in that cell?

StumpedAgain wrote:

I have the following program to translate a single-column database into a
matrix with five columns. I get an error on the line:

startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)

I'm not sure what the problem is. I've tried re-arranging and doing some
different things, but can't figure it out. Any thoughts?

Thanks!

Mind text wrapping:

Option Explicit
Sub Save_Time()

Dim glcount, j, m, n As Integer
Dim startspot, nextspot As Range

j = 0

Set startspot = Range("A1") 'or wherever you start
Set nextspot = Range("A1")

Do
Set startspot = startspot.Offset(j, 0)
If nextspot = "" Then Exit Do
nextspot.Select
ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

Set nextspot = ActiveCell.Offset(4, 0)
nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
m = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(m, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 3)

nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
n = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(n, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 4)

j = j + Application.Max(n, m)

Loop

End Sub

--

Dave Peterson
Reply With QuoteReply With Quote
  #4   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
The value in startspot is 10 characters long at that point. So I don't think
it's a length error. I took care of those ones. Any other thoughts?

"Dave Peterson" wrote:

How long is the value in startspot when the code blows up?

What is in that cell?

StumpedAgain wrote:

I have the following program to translate a single-column database into a
matrix with five columns. I get an error on the line:

startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)

I'm not sure what the problem is. I've tried re-arranging and doing some
different things, but can't figure it out. Any thoughts?

Thanks!

Mind text wrapping:

Option Explicit
Sub Save_Time()

Dim glcount, j, m, n As Integer
Dim startspot, nextspot As Range

j = 0

Set startspot = Range("A1") 'or wherever you start
Set nextspot = Range("A1")

Do
Set startspot = startspot.Offset(j, 0)
If nextspot = "" Then Exit Do
nextspot.Select
ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

Set nextspot = ActiveCell.Offset(4, 0)
nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
m = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(m, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 3)

nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
n = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(n, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 4)

j = j + Application.Max(n, m)

Loop

End Sub

--

Dave Peterson

Reply With QuoteReply With Quote
  #5   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 35,218
Default Almost there with procedure error
What error do you get?

StumpedAgain wrote:

The value in startspot is 10 characters long at that point. So I don't think
it's a length error. I took care of those ones. Any other thoughts?

"Dave Peterson" wrote:

How long is the value in startspot when the code blows up?

What is in that cell?

StumpedAgain wrote:

I have the following program to translate a single-column database into a
matrix with five columns. I get an error on the line:

startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)

I'm not sure what the problem is. I've tried re-arranging and doing some
different things, but can't figure it out. Any thoughts?

Thanks!

Mind text wrapping:

Option Explicit
Sub Save_Time()

Dim glcount, j, m, n As Integer
Dim startspot, nextspot As Range

j = 0

Set startspot = Range("A1") 'or wherever you start
Set nextspot = Range("A1")

Do
Set startspot = startspot.Offset(j, 0)
If nextspot = "" Then Exit Do
nextspot.Select
ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

Set nextspot = ActiveCell.Offset(4, 0)
nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
m = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(m, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 3)

nextspot.Select
Set nextspot = ActiveCell.End(xlDown).Offset(2, 0)

With ActiveCell
n = Range(.Offset(0, 0), .End(xlDown)).Rows.Count
End With

ActiveCell.Resize(n, 1).Select
Selection.Cut Destination:=startspot.Offset(0, 4)

j = j + Application.Max(n, m)

Loop

End Sub

--

Dave Peterson


--

Dave Peterson
Reply With QuoteReply With Quote
  #6   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
I get a run-time error '424': Object required on the line:

ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)

in the following section. If I change the order and put the
ActiveCell.Offset(2,0).cut line down a couple lines, I get the error on the
ActiveCell.Offset(0,0).cut line leading me to believe that I'm somehow
confusing the macro. Also, it works the first time through the loop. This
error occurs the second time through the loop. Ahh!!!

ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2) 'error
here
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)


Reply With QuoteReply With Quote
  #7   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 35,218
Default Almost there with procedure error
Instead of guessing at what your code does, how about posting some test data
that's in that single column and what you want it to look like when you're done.

I'm confused about the layout that you showed in your follow up post.



StumpedAgain wrote:

I get a run-time error '424': Object required on the line:

ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2)

in the following section. If I change the order and put the
ActiveCell.Offset(2,0).cut line down a couple lines, I get the error on the
ActiveCell.Offset(0,0).cut line leading me to believe that I'm somehow
confusing the macro. Also, it works the first time through the loop. This
error occurs the second time through the loop. Ahh!!!

ActiveCell.Offset(1, 0).Cut Destination:=startspot.Offset(0, 1)
ActiveCell.Offset(0, 0).Cut Destination:=startspot.Offset(0, 0)
ActiveCell.Offset(2, 0).Cut Destination:=startspot.Offset(0, 2) 'error
here
startspot.Offset(1, 1).Value = Right(startspot.Offset(0, 1).Value,
Len(startspot.Value) - 6)
startspot.Offset(1, 0) = Right(startspot.Offset(0, 0).Value,
Len(startspot.Value) - 6)
startspot.Value = Left(startspot.Value, 4)
startspot.Offset(0, 1).Value = Left(startspot.Offset(0, 1).Value, 4)
startspot.Offset(1, 2).Value = Right(startspot.Offset(0, 2).Value,
Len(startspot.Offset(0, 2).Value) - 7)
startspot.Offset(0, 2).Value = Left(startspot.Offset(0, 2).Value, 5)

--

Dave Peterson
Reply With QuoteReply With Quote
  #8   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
Sure. Sorry for the confusion.

What I have:

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

etc.

What I want:

Date Name Shift Category A Category B
123 456 789 line 1 line 1
line 2 line 2
line 3 line 3
line 4 line 4
line 5 line 5
line 6
Date Name Shift Category A Category B
345 678 123 line 1 line 1
line 2 line 2

etc.

Hopefully it doesn't wrap it weird. Hope this helps!
Reply With QuoteReply With Quote
  #9   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 35,218
Default Almost there with procedure error
You really have those "date:", "Name:", "Shift:" headers?

And empty cells between each of those groupings????

And those values in the cells are just plain old text--not formulas????

This just looks for the "Date:" in column A and then bases every group on that.
It does expect exactly 2 categories per group.

Option Explicit
Sub testme()

Dim CurWks As Worksheet
Dim NewWks As Worksheet
Dim FirstRow As Long
Dim oRow As Long
Dim BigRng As Range
Dim SmallArea As Range
Dim NextGroupMustBeFirstCategory As Boolean
Dim RngToCopy As Range
Dim oCol As Long
Dim LinesPerGroup As Long

Set CurWks = Worksheets("Sheet1")
Set NewWks = Worksheets.Add

With CurWks
FirstRow = 1
Set BigRng = .Range(.Cells(FirstRow, "A"), _
.Cells(.Rows.Count, "A").End(xlUp)) _
.Cells.SpecialCells(xlCellTypeConstants)
oRow = 0
LinesPerGroup = 1
For Each SmallArea In BigRng.Areas
If LCase(SmallArea.Cells(1, 1).Value) Like LCase("Date:*") Then
'This is the Date/name/shift group
'Start of a new group.
oRow = oRow + LinesPerGroup
NewWks.Cells(oRow, "A").Resize(1, 5).Value _
= Array("Date", "Name", "Shift", "Category A", "Category B")

oRow = oRow + 1
'remove "Date: "
NewWks.Cells(oRow, "A").Value _
= Trim(Mid(SmallArea.Cells(1, 1).Value, 6))

'remove "Name: "
NewWks.Cells(oRow, "B").Value _
= Trim(Mid(SmallArea.Cells(2, 1).Value, 6))

'remove "Shift: "
NewWks.Cells(oRow, "C").Value _
= Trim(Mid(SmallArea.Cells(3, 1).Value, 7))

NextGroupMustBeFirstCategory = True
LinesPerGroup = 3
Else
'This is the category A or Category B section.
With SmallArea
If .Cells.Count LinesPerGroup Then
LinesPerGroup = .Cells.Count
End If
Set RngToCopy = .Resize(.Rows.Count - 1, 1).Offset(1, 0)
End With
If NextGroupMustBeFirstCategory Then
oCol = 4 'column D
'get ready for the category B group
NextGroupMustBeFirstCategory = False
Else
oCol = 5 'column E
End If

RngToCopy.Copy
NewWks.Cells(oRow, oCol).PasteSpecial

End If
Next SmallArea

End With

Application.CutCopyMode = False
NewWks.UsedRange.Columns.AutoFit

End Sub




StumpedAgain wrote:

Sure. Sorry for the confusion.

What I have:

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

etc.

What I want:

Date Name Shift Category A Category B
123 456 789 line 1 line 1
line 2 line 2
line 3 line 3
line 4 line 4
line 5 line 5
line 6
Date Name Shift Category A Category B
345 678 123 line 1 line 1
line 2 line 2

etc.

Hopefully it doesn't wrap it weird. Hope this helps!

--

Dave Peterson
Reply With QuoteReply With Quote
  #10   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 192
Default Almost there with procedure error
You are the man. Still don't know what was wrong with mine but meh... yours
works just fine! Thanks!!!

"Dave Peterson" wrote:

You really have those "date:", "Name:", "Shift:" headers?

And empty cells between each of those groupings????

And those values in the cells are just plain old text--not formulas????

This just looks for the "Date:" in column A and then bases every group on that.
It does expect exactly 2 categories per group.

Option Explicit
Sub testme()

Dim CurWks As Worksheet
Dim NewWks As Worksheet
Dim FirstRow As Long
Dim oRow As Long
Dim BigRng As Range
Dim SmallArea As Range
Dim NextGroupMustBeFirstCategory As Boolean
Dim RngToCopy As Range
Dim oCol As Long
Dim LinesPerGroup As Long

Set CurWks = Worksheets("Sheet1")
Set NewWks = Worksheets.Add

With CurWks
FirstRow = 1
Set BigRng = .Range(.Cells(FirstRow, "A"), _
.Cells(.Rows.Count, "A").End(xlUp)) _
.Cells.SpecialCells(xlCellTypeConstants)
oRow = 0
LinesPerGroup = 1
For Each SmallArea In BigRng.Areas
If LCase(SmallArea.Cells(1, 1).Value) Like LCase("Date:*") Then
'This is the Date/name/shift group
'Start of a new group.
oRow = oRow + LinesPerGroup
NewWks.Cells(oRow, "A").Resize(1, 5).Value _
= Array("Date", "Name", "Shift", "Category A", "Category B")

oRow = oRow + 1
'remove "Date: "
NewWks.Cells(oRow, "A").Value _
= Trim(Mid(SmallArea.Cells(1, 1).Value, 6))

'remove "Name: "
NewWks.Cells(oRow, "B").Value _
= Trim(Mid(SmallArea.Cells(2, 1).Value, 6))

'remove "Shift: "
NewWks.Cells(oRow, "C").Value _
= Trim(Mid(SmallArea.Cells(3, 1).Value, 7))

NextGroupMustBeFirstCategory = True
LinesPerGroup = 3
Else
'This is the category A or Category B section.
With SmallArea
If .Cells.Count LinesPerGroup Then
LinesPerGroup = .Cells.Count
End If
Set RngToCopy = .Resize(.Rows.Count - 1, 1).Offset(1, 0)
End With
If NextGroupMustBeFirstCategory Then
oCol = 4 'column D
'get ready for the category B group
NextGroupMustBeFirstCategory = False
Else
oCol = 5 'column E
End If

RngToCopy.Copy
NewWks.Cells(oRow, oCol).PasteSpecial

End If
Next SmallArea

End With

Application.CutCopyMode = False
NewWks.UsedRange.Columns.AutoFit

End Sub




StumpedAgain wrote:

Sure. Sorry for the confusion.

What I have:

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

etc.

What I want:

Date Name Shift Category A Category B
123 456 789 line 1 line 1
line 2 line 2
line 3 line 3
line 4 line 4
line 5 line 5
line 6
Date Name Shift Category A Category B
345 678 123 line 1 line 1
line 2 line 2

etc.

Hopefully it doesn't wrap it weird. Hope this helps!

--

Dave Peterson

Reply With QuoteReply With Quote
  #11   Report Post  
Posted to microsoft.public.excel.programming
external usenet poster
  
Posts: 35,218
Default Almost there with procedure error
Actually, I really wanted this line:

RngToCopy.Copy
NewWks.Cells(oRow, oCol).PasteSpecial

to be:

RngToCopy.Copy _
destination:=NewWks.Cells(oRow, oCol)

But in this case, there really isn't a difference.



StumpedAgain wrote:

You are the man. Still don't know what was wrong with mine but meh... yours
works just fine! Thanks!!!

"Dave Peterson" wrote:

You really have those "date:", "Name:", "Shift:" headers?

And empty cells between each of those groupings????

And those values in the cells are just plain old text--not formulas????

This just looks for the "Date:" in column A and then bases every group on that.
It does expect exactly 2 categories per group.

Option Explicit
Sub testme()

Dim CurWks As Worksheet
Dim NewWks As Worksheet
Dim FirstRow As Long
Dim oRow As Long
Dim BigRng As Range
Dim SmallArea As Range
Dim NextGroupMustBeFirstCategory As Boolean
Dim RngToCopy As Range
Dim oCol As Long
Dim LinesPerGroup As Long

Set CurWks = Worksheets("Sheet1")
Set NewWks = Worksheets.Add

With CurWks
FirstRow = 1
Set BigRng = .Range(.Cells(FirstRow, "A"), _
.Cells(.Rows.Count, "A").End(xlUp)) _
.Cells.SpecialCells(xlCellTypeConstants)
oRow = 0
LinesPerGroup = 1
For Each SmallArea In BigRng.Areas
If LCase(SmallArea.Cells(1, 1).Value) Like LCase("Date:*") Then
'This is the Date/name/shift group
'Start of a new group.
oRow = oRow + LinesPerGroup
NewWks.Cells(oRow, "A").Resize(1, 5).Value _
= Array("Date", "Name", "Shift", "Category A", "Category B")

oRow = oRow + 1
'remove "Date: "
NewWks.Cells(oRow, "A").Value _
= Trim(Mid(SmallArea.Cells(1, 1).Value, 6))

'remove "Name: "
NewWks.Cells(oRow, "B").Value _
= Trim(Mid(SmallArea.Cells(2, 1).Value, 6))

'remove "Shift: "
NewWks.Cells(oRow, "C").Value _
= Trim(Mid(SmallArea.Cells(3, 1).Value, 7))

NextGroupMustBeFirstCategory = True
LinesPerGroup = 3
Else
'This is the category A or Category B section.
With SmallArea
If .Cells.Count LinesPerGroup Then
LinesPerGroup = .Cells.Count
End If
Set RngToCopy = .Resize(.Rows.Count - 1, 1).Offset(1, 0)
End With
If NextGroupMustBeFirstCategory Then
oCol = 4 'column D
'get ready for the category B group
NextGroupMustBeFirstCategory = False
Else
oCol = 5 'column E
End If

RngToCopy.Copy
NewWks.Cells(oRow, oCol).PasteSpecial

End If
Next SmallArea

End With

Application.CutCopyMode = False
NewWks.UsedRange.Columns.AutoFit

End Sub




StumpedAgain wrote:

Sure. Sorry for the confusion.

What I have:

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

Date: 123
Name: 456
Shift: 789

Category A
line 1
line 2
line 3
line 4
line 5

Category B
line 1
line 2
line 3
line 4
line 5
line 6

etc.

What I want:

Date Name Shift Category A Category B
123 456 789 line 1 line 1
line 2 line 2
line 3 line 3
line 4 line 4
line 5 line 5
line 6
Date Name Shift Category A Category B
345 678 123 line 1 line 1
line 2 line 2

etc.

Hopefully it doesn't wrap it weird. Hope this helps!

--

Dave Peterson


--

Dave Peterson
Reply With QuoteReply With Quote
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Procedure too large error phil-rge-ee Excel Programming 6 January 25th 07 03:11 PM
Form Err.Raise error not trapped by entry procedure error handler [email protected] Excel Programming 1 February 8th 06 10:19 AM
VBA Compile error: Procedure too large? Jerry Dyben Excel Discussion (Misc queries) 1 October 31st 05 10:15 PM
Compile error: Procedure too large Susan Hayes Excel Programming 2 May 20th 05 05:01 PM
Error: The procedure number is out of range Van S. Mabrito Excel Programming 1 February 19th 04 11:33 AM


All times are GMT +1. The time now is 12:36 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 ExcelBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Excel"

 

Contact Us ExcelBanter forum home Privacy Statement