Under Pressure back online again looking for support.

I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
cells in total) of conditional formats, 6 graphics,lots of text, numbers and
formulae.

This forms a template that I need to copy 300 times so that data from a
second spreadsheet can populate it. I have written a macro to do this.

Something must be wrong because it takes far too long - to even copy half a
dozen or so. I can use my mouse to copy and paste it faster.

I've done the usual things like turn the autocalculate off and screen update
off.

My macro copies the first 42 lines and then uses a simple loop to paste it
in the appropriate place under the original 42 lines.

Any suggestions?

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
| cells in total) of conditional formats, 6 graphics,lots of text, numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
| cells in total) of conditional formats, 6 graphics,lots of text, numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

try this in a REGULAR module. Notice the dots required for the WITH
statement

Sub copyit1()
ActiveSheet.ResetAllPageBreaks
With Sheets("sheet1")
For i = 1 To 3
.Rows("1:42").Copy .Cells(i * 42, "a")
ActiveWindow.SelectedSheets.HPageBreaks. _
Add Befo=.Cells(i * 42, "a")
Next i
End With
End Sub
--
Don Guillett
Microsoft MVP Excel
SalesAid Software

"Under Pressure" wrote in message
...
Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in
message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows
(195
| cells in total) of conditional formats, 6 graphics,lots of text,
numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy
half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen
update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste
it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Thanks Don

I'd like to try this but not sure how to.

Do I type it as a macro?

What is the difference between the working of your code and my original?

Cheers.

Under Pressure


"Don Guillett" wrote:

try this in a REGULAR module. Notice the dots required for the WITH
statement

Sub copyit1()
ActiveSheet.ResetAllPageBreaks
With Sheets("sheet1")
For i = 1 To 3
.Rows("1:42").Copy .Cells(i * 42, "a")
ActiveWindow.SelectedSheets.HPageBreaks. _
Add Befo=.Cells(i * 42, "a")
Next i
End With
End Sub
--
Don Guillett
Microsoft MVP Excel
SalesAid Software

"Under Pressure" wrote in message
...
Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in
message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows
(195
| cells in total) of conditional formats, 6 graphics,lots of text,
numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy
half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen
update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste
it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Please do not type it in. Copy from here and paste. Then fire from the
active sheet.
If all else fails, send your workbook to my address below. But, try first.

--
Don Guillett
Microsoft MVP Excel
SalesAid Software

"Under Pressure" wrote in message
...
Thanks Don

I'd like to try this but not sure how to.

Do I type it as a macro?

What is the difference between the working of your code and my original?

Cheers.

Under Pressure


"Don Guillett" wrote:

try this in a REGULAR module. Notice the dots required for the WITH
statement

Sub copyit1()
ActiveSheet.ResetAllPageBreaks
With Sheets("sheet1")
For i = 1 To 3
.Rows("1:42").Copy .Cells(i * 42, "a")
ActiveWindow.SelectedSheets.HPageBreaks. _
Add Befo=.Cells(i * 42, "a")
Next i
End With
End Sub
--
Don Guillett
Microsoft MVP Excel
SalesAid Software

"Under Pressure" wrote in
message
...
Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in
message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20
rows
(195
| cells in total) of conditional formats, 6 graphics,lots of text,
numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data
from a
| second spreadsheet can populate it. I have written a macro to do
this.
|
| Something must be wrong because it takes far too long - to even copy
half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and
screen
update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to
paste
it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Your problem is the "i=o" - you've got the letter o and not the number 0. It
could be treating i as a string, and appending 1 to the string, so after a
few loops it will be o111111111111111111, and never 3.

"Under Pressure" wrote:

Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
| cells in total) of conditional formats, 6 graphics,lots of text, numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Sam

Rather stupid of me, eh?

However, it didn't help. Presumably it assumed that letter'o' had the value
0 as the macro is run. Hence setting variable I to zero.

Macro is still incredibly slow - can't think why. It's only copying 42
lines. Even when I step through the macro one line at a time it pauses for
ages on the paste line.

Any more suggestions?

Under Pressure


"Sam Wilson" wrote:

Your problem is the "i=o" - you've got the letter o and not the number 0. It
could be treating i as a string, and appending 1 to the string, so after a
few loops it will be o111111111111111111, and never 3.

"Under Pressure" wrote:

Thanks, Niek

here it is !!!!!!

Application.ScreenUpdating = False

Sheets("Sheet1").Select
Range("a1").Select
Rows("1:42").Select
Range("A42").Activate
Selection.Copy

i = o
Do Until i = 3
i = i + 1

Range("a1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveSheet.Paste
Range("A1").Select
ActiveCell.Offset(42 * i, 0).Select
ActiveWindow.SelectedSheets.HPageBreaks.Add Befo=ActiveCell

Loop

"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
| cells in total) of conditional formats, 6 graphics,lots of text, numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?

Niek
Already posted the code.

Want to look at the spreadsheet?

If so, how do I post it?

Thanks agaon

Under Pressure


"Niek Otten" wrote:

Post the code of your macro

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Under Pressure" wrote in message
...
| Under Pressure back online again looking for support.
|
| I have a small spreadsheet, 42 rows and 14 columns,with about 20 rows (195
| cells in total) of conditional formats, 6 graphics,lots of text, numbers and
| formulae.
|
| This forms a template that I need to copy 300 times so that data from a
| second spreadsheet can populate it. I have written a macro to do this.
|
| Something must be wrong because it takes far too long - to even copy half a
| dozen or so. I can use my mouse to copy and paste it faster.
|
| I've done the usual things like turn the autocalculate off and screen update
| off.
|
| My macro copies the first 42 lines and then uses a simple loop to paste it
| in the appropriate place under the original 42 lines.
|
| Any suggestions?