Hello Everyone


We are having a random problem where Workbook Cells don't get updated unless
the user goes into the cell and presses enter in each cell. F9 does not work
when the problem occurs. Most of the time everything works perfectly but just
at random times it hiccups. The smallest workbook is around 20 Megabytes in
size and it contains a numerous amount of sheets that are tied to each other
with forumlas and a total sheet in the begining that gets the numbers from
previous sheets up to 4 levels deep. We usually see this problem in the Total
Sheet and when a deeper level sheet gets changed. This occurs across several
different machines. We also tested this with Excel 2007 on our most powerful
PC and saw the same problem. Some of the machines are dual cores with 2 gigs
of ram. This has happened with different workbooks, both locally and on the
network. There are no Macros no errors. We even had support check our
workbooks and everything looks sound and within Excel's capabilities. They
also confirmend that all of our settings are correct. The machines are all
running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
(With integration turned off), Adobe Reader. Does anyone have any ideas? Any
help is really appreciated.



Thank you,

Check out this link on calculation secrets. It outlines what XL is doing.
That might help...

http://www.decisionmodels.com/index.htm
--
HTH...

Jim Thomlinson


"Lost in Excel" wrote:

Hello Everyone


We are having a random problem where Workbook Cells don't get updated unless
the user goes into the cell and presses enter in each cell. F9 does not work
when the problem occurs. Most of the time everything works perfectly but just
at random times it hiccups. The smallest workbook is around 20 Megabytes in
size and it contains a numerous amount of sheets that are tied to each other
with forumlas and a total sheet in the begining that gets the numbers from
previous sheets up to 4 levels deep. We usually see this problem in the Total
Sheet and when a deeper level sheet gets changed. This occurs across several
different machines. We also tested this with Excel 2007 on our most powerful
PC and saw the same problem. Some of the machines are dual cores with 2 gigs
of ram. This has happened with different workbooks, both locally and on the
network. There are no Macros no errors. We even had support check our
workbooks and everything looks sound and within Excel's capabilities. They
also confirmend that all of our settings are correct. The machines are all
running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
(With integration turned off), Adobe Reader. Does anyone have any ideas? Any
help is really appreciated.



Thank you,

Check this list:

http://xldynamic.com/source/xld.xlFAQ0024.html

I'd bet for CTRL+SHIFT+ALT+F9 (if it works, do save the workbook!)

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Lost in Excel" <Lost in wrote in message
...
| Hello Everyone
|
|
| We are having a random problem where Workbook Cells don't get updated unless
| the user goes into the cell and presses enter in each cell. F9 does not work
| when the problem occurs. Most of the time everything works perfectly but just
| at random times it hiccups. The smallest workbook is around 20 Megabytes in
| size and it contains a numerous amount of sheets that are tied to each other
| with forumlas and a total sheet in the begining that gets the numbers from
| previous sheets up to 4 levels deep. We usually see this problem in the Total
| Sheet and when a deeper level sheet gets changed. This occurs across several
| different machines. We also tested this with Excel 2007 on our most powerful
| PC and saw the same problem. Some of the machines are dual cores with 2 gigs
| of ram. This has happened with different workbooks, both locally and on the
| network. There are no Macros no errors. We even had support check our
| workbooks and everything looks sound and within Excel's capabilities. They
| also confirmend that all of our settings are correct. The machines are all
| running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
| (With integration turned off), Adobe Reader. Does anyone have any ideas? Any
| help is really appreciated.
|
|
|
| Thank you,
|

Thank you for replying Niek Otten and Jim Thomlinson. CTRL+SHIFT+ALT+F9 did
not work when the problem occured either. Only way it works is if a user went
into each cell and pressed enter. Thank you for the links. It looks like the
information is very close to the problem we are having except
CTRL+SHIFT+ALT+F9 does not work when the problem occurs and it is very
random. We were never able to reproduce it during support.

"Niek Otten" wrote:

Check this list:

http://xldynamic.com/source/xld.xlFAQ0024.html

I'd bet for CTRL+SHIFT+ALT+F9 (if it works, do save the workbook!)

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Lost in Excel" <Lost in wrote in message
...
| Hello Everyone
|
|
| We are having a random problem where Workbook Cells don't get updated unless
| the user goes into the cell and presses enter in each cell. F9 does not work
| when the problem occurs. Most of the time everything works perfectly but just
| at random times it hiccups. The smallest workbook is around 20 Megabytes in
| size and it contains a numerous amount of sheets that are tied to each other
| with forumlas and a total sheet in the begining that gets the numbers from
| previous sheets up to 4 levels deep. We usually see this problem in the Total
| Sheet and when a deeper level sheet gets changed. This occurs across several
| different machines. We also tested this with Excel 2007 on our most powerful
| PC and saw the same problem. Some of the machines are dual cores with 2 gigs
| of ram. This has happened with different workbooks, both locally and on the
| network. There are no Macros no errors. We even had support check our
| workbooks and everything looks sound and within Excel's capabilities. They
| also confirmend that all of our settings are correct. The machines are all
| running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
| (With integration turned off), Adobe Reader. Does anyone have any ideas? Any
| help is really appreciated.
|
|
|
| Thank you,
|

An alternative to CTRL+SHIFT+ALT+F9 is a Find and replace all "=" by "=". Works for one sheet at a time only.

Are you sure there are no User Defined Functions involved?

Please let us know whether you're progressing..

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Lost in Excel" wrote in message
...
| Thank you for replying Niek Otten and Jim Thomlinson. CTRL+SHIFT+ALT+F9 did
| not work when the problem occured either. Only way it works is if a user went
| into each cell and pressed enter. Thank you for the links. It looks like the
| information is very close to the problem we are having except
| CTRL+SHIFT+ALT+F9 does not work when the problem occurs and it is very
| random. We were never able to reproduce it during support.
|
| "Niek Otten" wrote:
|
| Check this list:
|
| http://xldynamic.com/source/xld.xlFAQ0024.html
|
| I'd bet for CTRL+SHIFT+ALT+F9 (if it works, do save the workbook!)
|
| --
| Kind regards,
|
| Niek Otten
| Microsoft MVP - Excel
|
| "Lost in Excel" <Lost in wrote in message
| ...
| | Hello Everyone
| |
| |
| | We are having a random problem where Workbook Cells don't get updated unless
| | the user goes into the cell and presses enter in each cell. F9 does not work
| | when the problem occurs. Most of the time everything works perfectly but just
| | at random times it hiccups. The smallest workbook is around 20 Megabytes in
| | size and it contains a numerous amount of sheets that are tied to each other
| | with forumlas and a total sheet in the begining that gets the numbers from
| | previous sheets up to 4 levels deep. We usually see this problem in the Total
| | Sheet and when a deeper level sheet gets changed. This occurs across several
| | different machines. We also tested this with Excel 2007 on our most powerful
| | PC and saw the same problem. Some of the machines are dual cores with 2 gigs
| | of ram. This has happened with different workbooks, both locally and on the
| | network. There are no Macros no errors. We even had support check our
| | workbooks and everything looks sound and within Excel's capabilities. They
| | also confirmend that all of our settings are correct. The machines are all
| | running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
| | (With integration turned off), Adobe Reader. Does anyone have any ideas? Any
| | help is really appreciated.
| |
| |
| |
| | Thank you,
| |
|
|
|

Hello Niek Otten

Thank you for the new ideas. We have not tried the find and replace all with
the equal sign, but it looks like it may be a short term fix if it works.
There are no User Defined Functions involved. I am trying to reproduce the
problem, but havent been successful yet. When I am able to reproduce it, I
will give the find and replace all equal signs a try. If anyone has any more
ideas please let me know.


"Niek Otten" wrote:

An alternative to CTRL+SHIFT+ALT+F9 is a Find and replace all "=" by "=". Works for one sheet at a time only.

Are you sure there are no User Defined Functions involved?

Please let us know whether you're progressing..

--
Kind regards,

Niek Otten
Microsoft MVP - Excel

"Lost in Excel" wrote in message
...
| Thank you for replying Niek Otten and Jim Thomlinson. CTRL+SHIFT+ALT+F9 did
| not work when the problem occured either. Only way it works is if a user went
| into each cell and pressed enter. Thank you for the links. It looks like the
| information is very close to the problem we are having except
| CTRL+SHIFT+ALT+F9 does not work when the problem occurs and it is very
| random. We were never able to reproduce it during support.
|
| "Niek Otten" wrote:
|
| Check this list:
|
| http://xldynamic.com/source/xld.xlFAQ0024.html
|
| I'd bet for CTRL+SHIFT+ALT+F9 (if it works, do save the workbook!)
|
| --
| Kind regards,
|
| Niek Otten
| Microsoft MVP - Excel
|
| "Lost in Excel" <Lost in wrote in message
| ...
| | Hello Everyone
| |
| |
| | We are having a random problem where Workbook Cells don't get updated unless
| | the user goes into the cell and presses enter in each cell. F9 does not work
| | when the problem occurs. Most of the time everything works perfectly but just
| | at random times it hiccups. The smallest workbook is around 20 Megabytes in
| | size and it contains a numerous amount of sheets that are tied to each other
| | with forumlas and a total sheet in the begining that gets the numbers from
| | previous sheets up to 4 levels deep. We usually see this problem in the Total
| | Sheet and when a deeper level sheet gets changed. This occurs across several
| | different machines. We also tested this with Excel 2007 on our most powerful
| | PC and saw the same problem. Some of the machines are dual cores with 2 gigs
| | of ram. This has happened with different workbooks, both locally and on the
| | network. There are no Macros no errors. We even had support check our
| | workbooks and everything looks sound and within Excel's capabilities. They
| | also confirmend that all of our settings are correct. The machines are all
| | running Windows XP SP3, Office 2003, McAfee 8.5, Groupwise 7.0.2 to 7.0.3
| | (With integration turned off), Adobe Reader. Does anyone have any ideas? Any
| | help is really appreciated.
| |
| |
| |
| | Thank you,
| |
|
|
|