You can check out this web page of John McGimpsey, where he gives a VBA as
well as a WS function possible solution to your question:

http://www.mcgimpsey.com/excel/accumulator.html

--
HTH,

RD
==============================================
Please keep all correspondence within the Group, so all may benefit!
==============================================


"Anna / Ideal" wrote in message
...
Well, I thank you so much for all your help!!!!

"Roger Govier" wrote:

Hi Anna
I see. The mention of column made me think you had continuous columns of
data.
What you are cahnging and maintaining is just a cell.
Yes you will get circular references if trying to accumultae data.
I think the only solution is a VBA solution - I don't have time to sort
this
out for you right now as I have to go out.

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
Yes, you see this is not an ongoing column. I change the number daily
for
that particular department. The number I entered yesterday will not
be
there
today & today's will not be there tomorrow. I just type over the
previous
number with the new number. So I am manually keeping the MTD column
going.
I just thought there was a way to have that cell in the MTD column C
add
itself plus the new number in column B.

"Roger Govier" wrote:

Hi Anna

The formula is not adding column C. It is providing a summation of
column
B
from row 2 down to the last entry in column B that is not blank.
As you continue to enter more data successively down column B, the
adjacent
cell in column C will always reflect the summation as described
above.
Have
you actually tried it, or are you just assuming it doesn't work?

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
I beleive I did copy the formula correctly. The thing of it is, is
that
I
don't think that column C can add to itself. (when I tried to do
this
myself
I keep getting a circular reference) The number I putting in column
B
only
copies itself to column C exactly. It doesn't take the number
that's
already
in column C and add the new number in column B to itself. I'm only
getting
what I enter in column B in column C. There is no addition
happening.

"Roger Govier" wrote:

Hi Anna

I don't think you can have copied my formula correctly.
Is your Monthly data in column B? Is your cumulative in column C?
If not you will need to modify it accordingly.

Do note the use of the $ signs in front of the B and 2 at the
beginning
if
the last expression. They are ther to anchor the start point to
the
beginning of you data and will remain fixed as you copy down. The
second
B2
is relative, and will alter to B3, B4 etc. as you copy down.

=IF(B2="","",SUM($B$2:B2))
Post back iy you re using different columns, and can't amend the
formula
yourself.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Roger: Thank you for your response. My problem is this: When
I
used
this
formula and I typed in a number, that number was shown in the
MTD
column.
Perfect. Except when I enter a new number in the Current
column, it
just
put
that same number in the MTD column.

Say like this:

Current MTD
Shingle loads 5 10
Job set ups 4 8
Shingle complete 6 15

So, the next day I would just put a new number in the current
column
and
then I am manually changing the MTD column. I would like it to
automatically
add the new number itself in the MTD column.

Is this possible?

"Roger Govier" wrote:

With your current column being B starting with data in B2 and
your
MTD
column being C
In C2
=IF(B2="","",SUM($B$2:B2))
Copy down column C as far as you need.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I have a spreadsheet where I have an "Current" column & a
"MTD"
column,
can
I
have the MTD column keep a running total everytime I enter a
new
number
in
the Current column?

Thank you so much for this information. One more question, Can I use this
formula on several cells at a time using the automatic calculation? It seems
if I use this for more than one cell in a column, it will recalculate
everything.

"RagDyer" wrote:

You can check out this web page of John McGimpsey, where he gives a VBA as
well as a WS function possible solution to your question:

http://www.mcgimpsey.com/excel/accumulator.html

--
HTH,

RD
==============================================
Please keep all correspondence within the Group, so all may benefit!
==============================================


"Anna / Ideal" wrote in message
...
Well, I thank you so much for all your help!!!!

"Roger Govier" wrote:

Hi Anna
I see. The mention of column made me think you had continuous columns of
data.
What you are cahnging and maintaining is just a cell.
Yes you will get circular references if trying to accumultae data.
I think the only solution is a VBA solution - I don't have time to sort
this
out for you right now as I have to go out.

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
Yes, you see this is not an ongoing column. I change the number daily
for
that particular department. The number I entered yesterday will not
be
there
today & today's will not be there tomorrow. I just type over the
previous
number with the new number. So I am manually keeping the MTD column
going.
I just thought there was a way to have that cell in the MTD column C
add
itself plus the new number in column B.

"Roger Govier" wrote:

Hi Anna

The formula is not adding column C. It is providing a summation of
column
B
from row 2 down to the last entry in column B that is not blank.
As you continue to enter more data successively down column B, the
adjacent
cell in column C will always reflect the summation as described
above.
Have
you actually tried it, or are you just assuming it doesn't work?

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
I beleive I did copy the formula correctly. The thing of it is, is
that
I
don't think that column C can add to itself. (when I tried to do
this
myself
I keep getting a circular reference) The number I putting in column
B
only
copies itself to column C exactly. It doesn't take the number
that's
already
in column C and add the new number in column B to itself. I'm only
getting
what I enter in column B in column C. There is no addition
happening.

"Roger Govier" wrote:

Hi Anna

I don't think you can have copied my formula correctly.
Is your Monthly data in column B? Is your cumulative in column C?
If not you will need to modify it accordingly.

Do note the use of the $ signs in front of the B and 2 at the
beginning
if
the last expression. They are ther to anchor the start point to
the
beginning of you data and will remain fixed as you copy down. The
second
B2
is relative, and will alter to B3, B4 etc. as you copy down.

=IF(B2="","",SUM($B$2:B2))
Post back iy you re using different columns, and can't amend the
formula
yourself.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Roger: Thank you for your response. My problem is this: When
I
used
this
formula and I typed in a number, that number was shown in the
MTD
column.
Perfect. Except when I enter a new number in the Current
column, it
just
put
that same number in the MTD column.

Say like this:

Current MTD
Shingle loads 5 10
Job set ups 4 8
Shingle complete 6 15

So, the next day I would just put a new number in the current
column
and
then I am manually changing the MTD column. I would like it to
automatically
add the new number itself in the MTD column.

Is this possible?

"Roger Govier" wrote:

With your current column being B starting with data in B2 and
your
MTD
column being C
In C2
=IF(B2="","",SUM($B$2:B2))
Copy down column C as far as you need.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I have a spreadsheet where I have an "Current" column & a
"MTD"
column,
can
I
have the MTD column keep a running total everytime I enter a
new
number
in
the Current column?

AFAIK,

Automatic calculation will change (update) all such accumulator cells in the
*entire* WB.

The only thing I can think of, is to place these cells on different sheets.
Then, you can set calculation to "manual", and create new windows, so that
each sheet is concurrently displayed alongside each other.

Then, you can manually calculate *individual* sheets, thus revising one
accumulator, without changing the others.

<Shift <F9 will calculate *only* the sheet in focus.
--

HTH,

RD
================================================== ===
Please keep all correspondence within the Group, so all may benefit!
================================================== ===

"Anna / Ideal" wrote in message
...
Thank you so much for this information. One more question, Can I use this
formula on several cells at a time using the automatic calculation? It
seems
if I use this for more than one cell in a column, it will recalculate
everything.

"RagDyer" wrote:

You can check out this web page of John McGimpsey, where he gives a VBA as
well as a WS function possible solution to your question:

http://www.mcgimpsey.com/excel/accumulator.html

--
HTH,

RD
==============================================
Please keep all correspondence within the Group, so all may benefit!
==============================================


"Anna / Ideal" wrote in message
...
Well, I thank you so much for all your help!!!!

"Roger Govier" wrote:

Hi Anna
I see. The mention of column made me think you had continuous columns
of
data.
What you are cahnging and maintaining is just a cell.
Yes you will get circular references if trying to accumultae data.
I think the only solution is a VBA solution - I don't have time to
sort
this
out for you right now as I have to go out.

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
Yes, you see this is not an ongoing column. I change the number
daily
for
that particular department. The number I entered yesterday will not
be
there
today & today's will not be there tomorrow. I just type over the
previous
number with the new number. So I am manually keeping the MTD column
going.
I just thought there was a way to have that cell in the MTD column C
add
itself plus the new number in column B.

"Roger Govier" wrote:

Hi Anna

The formula is not adding column C. It is providing a summation of
column
B
from row 2 down to the last entry in column B that is not blank.
As you continue to enter more data successively down column B, the
adjacent
cell in column C will always reflect the summation as described
above.
Have
you actually tried it, or are you just assuming it doesn't work?

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I beleive I did copy the formula correctly. The thing of it is,
is
that
I
don't think that column C can add to itself. (when I tried to do
this
myself
I keep getting a circular reference) The number I putting in
column
B
only
copies itself to column C exactly. It doesn't take the number
that's
already
in column C and add the new number in column B to itself. I'm
only
getting
what I enter in column B in column C. There is no addition
happening.

"Roger Govier" wrote:

Hi Anna

I don't think you can have copied my formula correctly.
Is your Monthly data in column B? Is your cumulative in column
C?
If not you will need to modify it accordingly.

Do note the use of the $ signs in front of the B and 2 at the
beginning
if
the last expression. They are ther to anchor the start point to
the
beginning of you data and will remain fixed as you copy down.
The
second
B2
is relative, and will alter to B3, B4 etc. as you copy down.

=IF(B2="","",SUM($B$2:B2))
Post back iy you re using different columns, and can't amend the
formula
yourself.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Roger: Thank you for your response. My problem is this:
When
I
used
this
formula and I typed in a number, that number was shown in the
MTD
column.
Perfect. Except when I enter a new number in the Current
column, it
just
put
that same number in the MTD column.

Say like this:

Current MTD
Shingle loads 5 10
Job set ups 4 8
Shingle complete 6 15

So, the next day I would just put a new number in the current
column
and
then I am manually changing the MTD column. I would like it
to
automatically
add the new number itself in the MTD column.

Is this possible?

"Roger Govier" wrote:

With your current column being B starting with data in B2 and
your
MTD
column being C
In C2
=IF(B2="","",SUM($B$2:B2))
Copy down column C as far as you need.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I have a spreadsheet where I have an "Current" column & a
"MTD"
column,
can
I
have the MTD column keep a running total everytime I enter
a
new
number
in
the Current column?

Ok, I will try that. You have helped me so much. I appreciate your time.

Anna

"RagDyeR" wrote:

AFAIK,

Automatic calculation will change (update) all such accumulator cells in the
*entire* WB.

The only thing I can think of, is to place these cells on different sheets.
Then, you can set calculation to "manual", and create new windows, so that
each sheet is concurrently displayed alongside each other.

Then, you can manually calculate *individual* sheets, thus revising one
accumulator, without changing the others.

<Shift <F9 will calculate *only* the sheet in focus.
--

HTH,

RD
================================================== ===
Please keep all correspondence within the Group, so all may benefit!
================================================== ===

"Anna / Ideal" wrote in message
...
Thank you so much for this information. One more question, Can I use this
formula on several cells at a time using the automatic calculation? It
seems
if I use this for more than one cell in a column, it will recalculate
everything.

"RagDyer" wrote:

You can check out this web page of John McGimpsey, where he gives a VBA as
well as a WS function possible solution to your question:

http://www.mcgimpsey.com/excel/accumulator.html

--
HTH,

RD
==============================================
Please keep all correspondence within the Group, so all may benefit!
==============================================


"Anna / Ideal" wrote in message
...
Well, I thank you so much for all your help!!!!

"Roger Govier" wrote:

Hi Anna
I see. The mention of column made me think you had continuous columns
of
data.
What you are cahnging and maintaining is just a cell.
Yes you will get circular references if trying to accumultae data.
I think the only solution is a VBA solution - I don't have time to
sort
this
out for you right now as I have to go out.

--
Regards

Roger Govier


"Anna / Ideal" wrote in message
...
Yes, you see this is not an ongoing column. I change the number
daily
for
that particular department. The number I entered yesterday will not
be
there
today & today's will not be there tomorrow. I just type over the
previous
number with the new number. So I am manually keeping the MTD column
going.
I just thought there was a way to have that cell in the MTD column C
add
itself plus the new number in column B.

"Roger Govier" wrote:

Hi Anna

The formula is not adding column C. It is providing a summation of
column
B
from row 2 down to the last entry in column B that is not blank.
As you continue to enter more data successively down column B, the
adjacent
cell in column C will always reflect the summation as described
above.
Have
you actually tried it, or are you just assuming it doesn't work?

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I beleive I did copy the formula correctly. The thing of it is,
is
that
I
don't think that column C can add to itself. (when I tried to do
this
myself
I keep getting a circular reference) The number I putting in
column
B
only
copies itself to column C exactly. It doesn't take the number
that's
already
in column C and add the new number in column B to itself. I'm
only
getting
what I enter in column B in column C. There is no addition
happening.

"Roger Govier" wrote:

Hi Anna

I don't think you can have copied my formula correctly.
Is your Monthly data in column B? Is your cumulative in column
C?
If not you will need to modify it accordingly.

Do note the use of the $ signs in front of the B and 2 at the
beginning
if
the last expression. They are ther to anchor the start point to
the
beginning of you data and will remain fixed as you copy down.
The
second
B2
is relative, and will alter to B3, B4 etc. as you copy down.

=IF(B2="","",SUM($B$2:B2))
Post back iy you re using different columns, and can't amend the
formula
yourself.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Roger: Thank you for your response. My problem is this:
When
I
used
this
formula and I typed in a number, that number was shown in the
MTD
column.
Perfect. Except when I enter a new number in the Current
column, it
just
put
that same number in the MTD column.

Say like this:

Current MTD
Shingle loads 5 10
Job set ups 4 8
Shingle complete 6 15

So, the next day I would just put a new number in the current
column
and
then I am manually changing the MTD column. I would like it
to
automatically
add the new number itself in the MTD column.

Is this possible?

"Roger Govier" wrote:

With your current column being B starting with data in B2 and
your
MTD
column being C
In C2
=IF(B2="","",SUM($B$2:B2))
Copy down column C as far as you need.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I have a spreadsheet where I have an "Current" column & a
"MTD"
column,
can
I
have the MTD column keep a running total everytime I enter
a
new
number
in
the Current column?

Hope it works out for you.
--

Regards,

RD
----------------------------------------------------------------------------
-------------------
Please keep all correspondence within the Group, so all may benefit !
----------------------------------------------------------------------------
-------------------

"Anna / Ideal" wrote in message
...
Ok, I will try that. You have helped me so much. I appreciate your time.

Anna

"RagDyeR" wrote:

AFAIK,

Automatic calculation will change (update) all such accumulator cells in
the
*entire* WB.

The only thing I can think of, is to place these cells on different
sheets.
Then, you can set calculation to "manual", and create new windows, so that
each sheet is concurrently displayed alongside each other.

Then, you can manually calculate *individual* sheets, thus revising one
accumulator, without changing the others.

<Shift <F9 will calculate *only* the sheet in focus.
--

HTH,

RD
================================================== ===
Please keep all correspondence within the Group, so all may benefit!
================================================== ===

"Anna / Ideal" wrote in message
...
Thank you so much for this information. One more question, Can I use this
formula on several cells at a time using the automatic calculation? It
seems
if I use this for more than one cell in a column, it will recalculate
everything.

"RagDyer" wrote:

You can check out this web page of John McGimpsey, where he gives a VBA
as
well as a WS function possible solution to your question:

http://www.mcgimpsey.com/excel/accumulator.html

--
HTH,

RD
==============================================
Please keep all correspondence within the Group, so all may benefit!
==============================================


"Anna / Ideal" wrote in message
...
Well, I thank you so much for all your help!!!!

"Roger Govier" wrote:

Hi Anna
I see. The mention of column made me think you had continuous
columns
of
data.
What you are cahnging and maintaining is just a cell.
Yes you will get circular references if trying to accumultae data.
I think the only solution is a VBA solution - I don't have time to
sort
this
out for you right now as I have to go out.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Yes, you see this is not an ongoing column. I change the number
daily
for
that particular department. The number I entered yesterday will
not
be
there
today & today's will not be there tomorrow. I just type over the
previous
number with the new number. So I am manually keeping the MTD
column
going.
I just thought there was a way to have that cell in the MTD column
C
add
itself plus the new number in column B.

"Roger Govier" wrote:

Hi Anna

The formula is not adding column C. It is providing a summation
of
column
B
from row 2 down to the last entry in column B that is not blank.
As you continue to enter more data successively down column B,
the
adjacent
cell in column C will always reflect the summation as described
above.
Have
you actually tried it, or are you just assuming it doesn't work?

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
I beleive I did copy the formula correctly. The thing of it is,
is
that
I
don't think that column C can add to itself. (when I tried to
do
this
myself
I keep getting a circular reference) The number I putting in
column
B
only
copies itself to column C exactly. It doesn't take the number
that's
already
in column C and add the new number in column B to itself. I'm
only
getting
what I enter in column B in column C. There is no addition
happening.

"Roger Govier" wrote:

Hi Anna

I don't think you can have copied my formula correctly.
Is your Monthly data in column B? Is your cumulative in column
C?
If not you will need to modify it accordingly.

Do note the use of the $ signs in front of the B and 2 at the
beginning
if
the last expression. They are ther to anchor the start point
to
the
beginning of you data and will remain fixed as you copy down.
The
second
B2
is relative, and will alter to B3, B4 etc. as you copy down.

=IF(B2="","",SUM($B$2:B2))
Post back iy you re using different columns, and can't amend
the
formula
yourself.

--
Regards

Roger Govier


"Anna / Ideal" wrote in
message
...
Roger: Thank you for your response. My problem is this:
When
I
used
this
formula and I typed in a number, that number was shown in
the
MTD
column.
Perfect. Except when I enter a new number in the Current
column, it
just
put
that same number in the MTD column.

Say like this:

Current MTD
Shingle loads 5 10
Job set ups 4 8
Shingle complete 6 15

So, the next day I would just put a new number in the
current
column
and
then I am manually changing the MTD column. I would like it
to
automatically
add the new number itself in the MTD column.

Is this possible?

"Roger Govier" wrote:

With your current column being B starting with data in B2
and
your
MTD
column being C
In C2
=IF(B2="","",SUM($B$2:B2))
Copy down column C as far as you need.

--
Regards

Roger Govier


"Anna / Ideal" wrote
in
message
...
I have a spreadsheet where I have an "Current" column & a
"MTD"
column,
can
I
have the MTD column keep a running total everytime I
enter
a
new
number
in
the Current column?