| Home |
| Search |
| Today's Posts |
|
#1
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Help with IF stament (getting result FALSE in some cases)
Good morning everyone.
I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#2
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Hi Mark,
Apart from anything else, you formula doesn't cater for G109=70% or G109=100%. Plus all the nested IFs seem to be pointing to the same sum: SUM(G90-G96). Note also the odd positioning of the closing brackets for the AVERAGE('Base Data'!$I$31:$I$35 functions - they're all at the end of the formula. It seems you're trying to nest the 70% test results inside the 'AVERAGE' function. Perhaps you could explain what you're trying to do. Maybe something along the lines of: =IF(G109<70%),1,IF(G109<100%,2,3))*(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35) where the 1,2,3 represent constants for the G109 % values? -- Cheers macropod [Microsoft MVP - Word] "Mark D" wrote in message ... Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#3
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Try
=(G90-G96)*(AVERAGE(IF(G109<70%,('Base Data'!$I$31:$I$35),IF(G109<99.99%,'Base Data'!$H$31:$H$35,'Base Data'!$G$31:$G$35)))) -- HTH Bob "Mark D" wrote in message ... Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#4
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Hi Mark,
try =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(AND(G10970.01%,G109<99.99%), SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#5
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Hi there,
Your missing a (OR) statement within the function. I included it for you. =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(or(G10970.01%,g109<99.99%),S UM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) Hope this helps you -- Thank you and Regards Garreth Lombard "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#6
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Morning Macropod
Thanks for your reply. What I am trying to do in this formula is to say (and I have simplified it to remove the average function i had previously). 1. IF G109 (G109 = %) is less than 70% then take G90-G96 (G90 Turnover - G96 Costs) * Base Data I36 (I36 is a % number) BUT IF G109 (%) is greater than 70% BUT less than 100% then take G90-G96 (G90 Turnover - G96 Costs) * Base Data H36 (H36 is a % number) BUT IF G109 (%) is greater than 100% then take G90-G96 (G90 Turnover - G96 Costs) * Base Data G36 (G36 is a % number) Does that make sense what I am trying to do?? Thanks again "macropod" wrote: Hi Mark, Apart from anything else, you formula doesn't cater for G109=70% or G109=100%. Plus all the nested IFs seem to be pointing to the same sum: SUM(G90-G96). Note also the odd positioning of the closing brackets for the AVERAGE('Base Data'!$I$31:$I$35 functions - they're all at the end of the formula. It seems you're trying to nest the 70% test results inside the 'AVERAGE' function. Perhaps you could explain what you're trying to do. Maybe something along the lines of: =IF(G109<70%),1,IF(G109<100%,2,3))*(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35) where the 1,2,3 represent constants for the G109 % values? -- Cheers macropod [Microsoft MVP - Word] "Mark D" wrote in message ... Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks . |
|
#7
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Try the below
=(G90-G96)*AVERAGE(OFFSET(G31:G35,,LOOKUP(G10,{0,0.7,1}, {2,1,0}))) -- Jacob "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#8
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Hi Jacob
I have entered this formula in but am getting the error dialogue box come up. It's highlighting a problem with G96??? "Jacob Skaria" wrote: Try the below =(G90-G96)*AVERAGE(OFFSET(G31:G35,,LOOKUP(G10,{0,0.7,1}, {2,1,0}))) -- Jacob "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#9
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
Are you sure.....I missed the sheet reference..
=(G90-G96)*AVERAGE(OFFSET('Base Data'!G31:G35,, LOOKUP(G10,{0,0.7,1},{2,1,0}))) -- Jacob "Mark D" wrote: Hi Jacob I have entered this formula in but am getting the error dialogue box come up. It's highlighting a problem with G96??? "Jacob Skaria" wrote: Try the below =(G90-G96)*AVERAGE(OFFSET(G31:G35,,LOOKUP(G10,{0,0.7,1}, {2,1,0}))) -- Jacob "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
|
#10
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
|
Help with IF stament (getting result FALSE in some cases)
=(G90-G96)*AVERAGE(OFFSET('Base Data'!G31:G35,,
LOOKUP(G109,{0,0.7,1},{2,1,0}))) -- Jacob "Mark D" wrote: Hi Jacob I have entered this formula in but am getting the error dialogue box come up. It's highlighting a problem with G96??? "Jacob Skaria" wrote: Try the below =(G90-G96)*AVERAGE(OFFSET(G31:G35,,LOOKUP(G10,{0,0.7,1}, {2,1,0}))) -- Jacob "Mark D" wrote: Good morning everyone. I have the following calculation that is causing me a problem =IF(G109<70%,SUM(G90-G96)*AVERAGE('Base Data'!$I$31:$I$35,IF(G10970.01%<99.99%,SUM(G90-G96)*AVERAGE('Base Data'!$H$31:$H$35,IF(G109100%,SUM(G90-G96)*AVERAGE('Base Data'!$G$31:$G$35)))))) The 1st part of the formula (<70% ) is working and returning a value. However if the % is greater than 70% I am getting the result FALSE I'm sure it's a simple fix but cannot put my finger on it Any help greatly appreciated, Thanks |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Formula for Cases=144 * # of Cases + Pieces | Excel Discussion (Misc queries) | |||
| Nested if with an unwanted false result | Excel Discussion (Misc queries) | |||
| Result = to 0 says false | Excel Worksheet Functions | |||
| false result | Excel Worksheet Functions | |||
| IF Stament formula nesting | Excel Discussion (Misc queries) | |||
![Mark D[_2_] is offline](https://www.excelbanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Linear Mode
