I need help with nested find loop. I have 3-9 work sheets that have the same
formatted data on them just the numbers change. The sheets are named by the
operator that took the data ie. ( jeff, ron, bill etc.) I need to check all
the sheets in the work book and write them to a new sheet call Data Report.
The data on the sheets looks like this.
PART# 1
SC 001 Z
AXIS X 6335.002 6335 0.002 1.5 -1.5
AXIS Y 830.991 831 -0.009 1.5 -1.5
AXIS Z 2250.631 2250.9 -0.269 1.5 -1.5

SC 002 X
AXIS X 6311.002 6311 0.002 1.5 -1.5
AXIS Y 898.508 898.51 -0.002 1.5 -1.5
AXIS Z 2242.783 2243.35 -0.567 1.5 -1.5

SC 003 Y
AXIS X 6255.289 6255.06 0.229 1.5 -1.5
AXIS Y 937.806 938.33 -0.524 1.5 -1.5
AXIS Z 2124.906 2125 -0.094 1.5 -1.5

PART# 2
SC 001 Z
AXIS X 6335.002 6335 0.002 1.5 -1.5
AXIS Y 830.991 831 -0.009 1.5 -1.5
AXIS Z 2252.631 2250.9 -0.269 1.5 -1.5

SC 002 X
AXIS X 6313.002 6311 0.002 1.5 -1.5
AXIS Y 898.508 898.51 -0.002 1.5 -1.5
AXIS Z 2242.783 2243.35 -0.567 1.5 -1.5

SC 003 Y
AXIS X 6255.289 6255.06 0.229 1.5 -1.5
AXIS Y 937.806 938.33 -0.524 1.5 -1.5
AXIS Z 2124.906 2125 -0.094 1.5 -1.5

PART# 3
SC 001 Z
AXIS X 6335.002 6335 0.002 1.5 -1.5
AXIS Y 830.991 831 -0.009 1.5 -1.5
AXIS Z 2251.631 2250.9 -0.269 1.5 -1.5

SC 002 X
AXIS X 6312.002 6311 0.002 1.5 -1.5
AXIS Y 898.508 898.51 -0.002 1.5 -1.5
AXIS Z 2242.783 2243.35 -0.567 1.5 -1.5

SC 003 Y
AXIS X 6255.289 6255.06 0.229 1.5 -1.5
AXIS Y 937.806 938.33 -0.524 1.5 -1.5
AXIS Z 2124.906 2125 -0.094 1.5 -1.5
Is what I need is to put each part # on a separate line with only the 1st
set of numbers that correspond to the letter in the SC number. ex. (SC 001 Z
in need the number beside the Axis Z€¦ 2250.631) There may be any ware from 3
SC points to more than 20 and any ware from 3 parts to more than 10.
The final data should look like this.
SC 001 SC 002 SC 003
jeff Part # 1 2250.631 6311.002 937.806
Part # 2 2252.631 6313.002 937.806
Part # 3 2251.631 6312.002 937.806
ron Part # 1 2250.631 6311.002 937.806
Part # 2 2252.631 6313.002 937.806
Part # 3 2251.631 6312.002 937.806
bill Part # 1 2250.631 6311.002 937.806
Part # 2 2252.631 6313.002 937.806
Part # 3 2251.631 6312.002 937.806
The persons name or the part name does not need to be on the report. I just
put it there for clarity reasons. Anything you could give me would be a great
help. Thanks Jeff