I have downloaded this function, but cannot seem to make it work. I need to
sum up 13 sheets using a vlookup reference (cell B13). This is what I used:

=SUM(VLOOKUP(B13,THREED(EUR:VGS!$B$12:$V$120),6,0) )

EUR:VGS are the sheet names. Each sheet in between has a different name. Is
my naming convention not going to work? Right now it only returns the value
from the first sheet (EUR) only.

Thanks
CM

Try...

=SUMPRODUCT(--(THREED(EUR:VGS!$B$12:$B$120)=B13),THREED(EUR:VGS! $G$12:$G$
120))

Hope this helps!

In article ,
CM wrote:

I have downloaded this function, but cannot seem to make it work. I need to
sum up 13 sheets using a vlookup reference (cell B13). This is what I used:

=SUM(VLOOKUP(B13,THREED(EUR:VGS!$B$12:$V$120),6,0) )

EUR:VGS are the sheet names. Each sheet in between has a different name. Is
my naming convention not going to work? Right now it only returns the value
from the first sheet (EUR) only.

Thanks
CM

Sorry about my super late reply, wasn't at work for the past week, but I
wanted to thank you for your response.

Perfection, sir!

My Excel skills have gone from lowly intern to near-mad-ninja (relative to
my officemates) thanks to everyone on this forum! I owe you all a beer.


"Domenic" wrote:

Try...

=SUMPRODUCT(--(THREED(EUR:VGS!$B$12:$B$120)=B13),THREED(EUR:VGS! $G$12:$G$
120))

Hope this helps!

In article ,
CM wrote:

I have downloaded this function, but cannot seem to make it work. I need to
sum up 13 sheets using a vlookup reference (cell B13). This is what I used:

=SUM(VLOOKUP(B13,THREED(EUR:VGS!$B$12:$V$120),6,0) )

EUR:VGS are the sheet names. Each sheet in between has a different name. Is
my naming convention not going to work? Right now it only returns the value
from the first sheet (EUR) only.

Thanks
CM

Hi
I have similar requirement and it did not work for me, can you please fix
the error in my formula
=SUMPRODUCT(--(THREED('Jan ''08:May ''08'!$K$6:$K$8)=K12),THREED('Jan
''08:May ''08'!$L$6:$L$8))
this is only for testing before i use on required big range.
thanks in advance


"Domenic" wrote:

Try...

=SUMPRODUCT(--(THREED(EUR:VGS!$B$12:$B$120)=B13),THREED(EUR:VGS! $G$12:$G$
120))

Hope this helps!

In article ,
CM wrote:

I have downloaded this function, but cannot seem to make it work. I need to
sum up 13 sheets using a vlookup reference (cell B13). This is what I used:

=SUM(VLOOKUP(B13,THREED(EUR:VGS!$B$12:$V$120),6,0) )

EUR:VGS are the sheet names. Each sheet in between has a different name. Is
my naming convention not going to work? Right now it only returns the value
from the first sheet (EUR) only.

Thanks
CM

Dominic

I am having reall issues with Threed.

Im trying to incorporate it into a sumproduct as shown in your last
response. The formula is

=SUMPRODUCT(--(THREED(Start:End!A3)=A6),--(THREED(Start:End!A6:A9)=$B6),THREED(Start:End!C6: D9))

However the first two Threed arrays look at text rather than figures. For
example Start:end!A3 looks at two worksheets with the words Exeter in
worksheet 1 and Barnsley in worksheet 2. However within the formula above the
threed function returns

{0;"Exe ";"Barn ";0}

which when I put in the condition =A6 of "Exeter", the formula returns False.

Is this a limitation of Threed or am I doing something wrong?

Cheers

Matt

"Domenic" wrote:

Try...

=SUMPRODUCT(--(THREED(EUR:VGS!$B$12:$B$120)=B13),THREED(EUR:VGS! $G$12:$G$
120))

Hope this helps!

In article ,
CM wrote:

I have downloaded this function, but cannot seem to make it work. I need to
sum up 13 sheets using a vlookup reference (cell B13). This is what I used:

=SUM(VLOOKUP(B13,THREED(EUR:VGS!$B$12:$V$120),6,0) )

EUR:VGS are the sheet names. Each sheet in between has a different name. Is
my naming convention not going to work? Right now it only returns the value
from the first sheet (EUR) only.

Thanks
CM

The ranges for each argument need to be the same size. For which range
does the first condition need to be met?

--
Domenic
Microsoft Excel MVP
www.xl-central.com
Your Quick Reference to Excel Solutions

In article ,
MattEd101 wrote:

Dominic

I am having reall issues with Threed.

Im trying to incorporate it into a sumproduct as shown in your last
response. The formula is

=SUMPRODUCT(--(THREED(Start:End!A3)=A6),--(THREED(Start:End!A6:A9)=$B6),THREED
(Start:End!C6:D9))

However the first two Threed arrays look at text rather than figures. For
example Start:end!A3 looks at two worksheets with the words Exeter in
worksheet 1 and Barnsley in worksheet 2. However within the formula above the
threed function returns

{0;"Exe ";"Barn ";0}

which when I put in the condition =A6 of "Exeter", the formula returns False.

Is this a limitation of Threed or am I doing something wrong?

Cheers

Matt

I realised I hadn't used ranges of the same size this morning, works a treat
now

Cheers for the response

You will probably see me on here again at some point.

Matt

"Domenic" wrote:

The ranges for each argument need to be the same size. For which range
does the first condition need to be met?

--
Domenic
Microsoft Excel MVP
www.xl-central.com
Your Quick Reference to Excel Solutions

In article ,
MattEd101 wrote:

Dominic

I am having reall issues with Threed.

Im trying to incorporate it into a sumproduct as shown in your last
response. The formula is

=SUMPRODUCT(--(THREED(Start:End!A3)=A6),--(THREED(Start:End!A6:A9)=$B6),THREED
(Start:End!C6:D9))

However the first two Threed arrays look at text rather than figures. For
example Start:end!A3 looks at two worksheets with the words Exeter in
worksheet 1 and Barnsley in worksheet 2. However within the formula above the
threed function returns

{0;"Exe ";"Barn ";0}

which when I put in the condition =A6 of "Exeter", the formula returns False.

Is this a limitation of Threed or am I doing something wrong?

Cheers

Matt

I say works a treat

my new formula turned out to be

=SUMPRODUCT(--(THREED(start:End!$A$9:$A$13)=$B9),--(THREED(start:End!$B$9:$B$13)=$A9),THREED(start:En d!D$9:D$13))

Which worked. This was only a test however so I tried to replicate with the
following (which has 3 conditions)

=SUMPRODUCT(--(THREED(Start:End!$B$154:$B$180)=$E129),--(THREED(Start:End!$C$154:$C$180)=$D129),--(THREED(Start:End!$C$154:$C$180)=$F129),THREED(Sta rt:End!$H$154:$H$180))

But each time I press F9 on the Threed arrays, the result does not refer to
the data in the colums specified.

E.g C154:C180 should look at an array of numbers, but when you press F9, it
actually returns an array of place names which is what B154:B180 should be
looking at! I thought anchoring the array would help but apparently not





"MattEd101" wrote:

I realised I hadn't used ranges of the same size this morning, works a treat
now

Cheers for the response

You will probably see me on here again at some point.

Matt

"Domenic" wrote:

The ranges for each argument need to be the same size. For which range
does the first condition need to be met?

--
Domenic
Microsoft Excel MVP
www.xl-central.com
Your Quick Reference to Excel Solutions

In article ,
MattEd101 wrote:

Dominic

I am having reall issues with Threed.

Im trying to incorporate it into a sumproduct as shown in your last
response. The formula is

=SUMPRODUCT(--(THREED(Start:End!A3)=A6),--(THREED(Start:End!A6:A9)=$B6),THREED
(Start:End!C6:D9))

However the first two Threed arrays look at text rather than figures. For
example Start:end!A3 looks at two worksheets with the words Exeter in
worksheet 1 and Barnsley in worksheet 2. However within the formula above the
threed function returns

{0;"Exe ";"Barn ";0}

which when I put in the condition =A6 of "Exeter", the formula returns False.

Is this a limitation of Threed or am I doing something wrong?

Cheers

Matt

Hi,

I am having the same issues as others but haven't been able to resolve them.
The formula I have tried after the add in installation is
=SUMPRODUCT(--(THREED('General Scientific:tab1'!A3)=AE3,(THREED('General
Scientific:tab1'!J3)))). I am looking to sum j3 numbers in the same cell in
every tab if the criteria of ae3 matches that in a3 in every tab. Can you see
what my error could be here? So frustrating.

Thanks!

Sorry if this is a repeat but I can't see if my last one posted. I am trying
to replicate the same thing everyone else is but it's not working. I have the
add in. This is my formula
=SUMPRODUCT(--(THREED('B2B:tab1'!A3)=AE3,(THREED('B2B:tab1'!J3)) )). I am
trying to look in all tabs from the A3 cell that is equal to the contents of
AE3 and if it is to sum the range of all amounts in J3 on every tab. What am
I doing wrong? I get N/A as a result. Thanks.