I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

What happens when you print preview?

If you see everything there, then it may not be excel. It could be your
printer. I remember a time a longgggggg time ago where complex reports wouldn't
print completely. We ended up buying more memory for the printer to resolve the
problem.

Maybe you could try a different printer (or different printer type) to test.

lainey wrote:

I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

--

Dave Peterson

The whole spreadsheet shows up on preview. I used the same spreadsheet on my
old computer and it print out fine on the same printer that I am using now
with the new computer. I am using Vista and have even composed a new
spreadsheet thinking the old file might have been corrupted when it was
transferred. It still only prints a portion of the spreadsheet. My old
printer is compatible with Vista, so that is not an issue either. I am
baffled as to what the problem is.

"Dave Peterson" wrote:

What happens when you print preview?

If you see everything there, then it may not be excel. It could be your
printer. I remember a time a longgggggg time ago where complex reports wouldn't
print completely. We ended up buying more memory for the printer to resolve the
problem.

Maybe you could try a different printer (or different printer type) to test.

lainey wrote:

I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

--

Dave Peterson

If the print preview works fine, I'd look at the printer--not excel.

But I've been wrong lots of times.

lainey wrote:

The whole spreadsheet shows up on preview. I used the same spreadsheet on my
old computer and it print out fine on the same printer that I am using now
with the new computer. I am using Vista and have even composed a new
spreadsheet thinking the old file might have been corrupted when it was
transferred. It still only prints a portion of the spreadsheet. My old
printer is compatible with Vista, so that is not an issue either. I am
baffled as to what the problem is.

"Dave Peterson" wrote:

What happens when you print preview?

If you see everything there, then it may not be excel. It could be your
printer. I remember a time a longgggggg time ago where complex reports wouldn't
print completely. We ended up buying more memory for the printer to resolve the
problem.

Maybe you could try a different printer (or different printer type) to test.

lainey wrote:

I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

--

Dave Peterson


--

Dave Peterson

I don't have access to another printer at the moment. If this printer was
able to print the same exact spreadsheet from the old computer, I don't
understand why it won't print it from the new computer. Is there something I
need to check on the printer? I know it is compatible with Vista because I
checked it out on HP website. I really appreciate your input! I am at a loss.
I can still do my spreadsheets on the old computer and print, but am trying
to get away from using both computers.

"Dave Peterson" wrote:

If the print preview works fine, I'd look at the printer--not excel.

But I've been wrong lots of times.

lainey wrote:

The whole spreadsheet shows up on preview. I used the same spreadsheet on my
old computer and it print out fine on the same printer that I am using now
with the new computer. I am using Vista and have even composed a new
spreadsheet thinking the old file might have been corrupted when it was
transferred. It still only prints a portion of the spreadsheet. My old
printer is compatible with Vista, so that is not an issue either. I am
baffled as to what the problem is.

"Dave Peterson" wrote:

What happens when you print preview?

If you see everything there, then it may not be excel. It could be your
printer. I remember a time a longgggggg time ago where complex reports wouldn't
print completely. We ended up buying more memory for the printer to resolve the
problem.

Maybe you could try a different printer (or different printer type) to test.

lainey wrote:

I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

--

Dave Peterson


--

Dave Peterson

I don't have any specific tips to give you.

But if the file|Print preview works ok, then I don't think that it's excel's
fault.

There are some printers that use your pc's memory instead of its own. Maybe
closing all other applications would help--it might be worth a test.

If that fails, you may want to identify the make and model of printer, the
version of excel you're using and the version of windows you're running.

It may help any potential responder.

If that doesn't help, lots of printers have their own support sites (knowledge
base articles and user forums)--you may want to visit the manufacturer's site
and look for solutions there.

lainey wrote:

I don't have access to another printer at the moment. If this printer was
able to print the same exact spreadsheet from the old computer, I don't
understand why it won't print it from the new computer. Is there something I
need to check on the printer? I know it is compatible with Vista because I
checked it out on HP website. I really appreciate your input! I am at a loss.
I can still do my spreadsheets on the old computer and print, but am trying
to get away from using both computers.

"Dave Peterson" wrote:

If the print preview works fine, I'd look at the printer--not excel.

But I've been wrong lots of times.

lainey wrote:

The whole spreadsheet shows up on preview. I used the same spreadsheet on my
old computer and it print out fine on the same printer that I am using now
with the new computer. I am using Vista and have even composed a new
spreadsheet thinking the old file might have been corrupted when it was
transferred. It still only prints a portion of the spreadsheet. My old
printer is compatible with Vista, so that is not an issue either. I am
baffled as to what the problem is.

"Dave Peterson" wrote:

What happens when you print preview?

If you see everything there, then it may not be excel. It could be your
printer. I remember a time a longgggggg time ago where complex reports wouldn't
print completely. We ended up buying more memory for the printer to resolve the
problem.

Maybe you could try a different printer (or different printer type) to test.

lainey wrote:

I am trying to print a one-page spreadsheet in lanscape view, but am only
getting about 1/3 of the spreadsheet. I've tried to set print area, clear
print area, highlight print area, etc. all to no avail. Hope someone can help.

--

Dave Peterson


--

Dave Peterson


--

Dave Peterson