Home |
Search |
Today's Posts |
#1
|
|||
|
|||
How to take a cell that has 3 values and make 2 more new lines
Hello,
I have a cell that has 3 values in it, and want to BREAK it up so that instead, I will get 2 MORE NEW rows, for a total now of 3 rows. I believe the values were inserted into the cell using the CTRL+ENTER key combination. There is a non-printable character (ANSI 0010) visible in the EDIT window to make the new line. Also, there are instances where it may be only 2 values (which occurs MOST of the time), or other instances where there may be as much as 5 values in the same cell. Here is a typical cell: (obviously you can disregard the COL and ROW references) COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 ROW-4 8-6-045-012 So what I want to do is to create a 2 MORE new rows to read like this: COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 251254 Floyd Daniels ROW-4 8-6-045-012 251254 Floyd Daniels How can this be done? TIA for your replies. Phil. |
#2
|
|||
|
|||
How to take a cell that has 3 values and make 2 more new lines
Try this, Phil:
http://www.officearticles.com/excel/...soft_excel.htm ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Hello, I have a cell that has 3 values in it, and want to BREAK it up so that instead, I will get 2 MORE NEW rows, for a total now of 3 rows. I believe the values were inserted into the cell using the CTRL+ENTER key combination. There is a non-printable character (ANSI 0010) visible in the EDIT window to make the new line. Also, there are instances where it may be only 2 values (which occurs MOST of the time), or other instances where there may be as much as 5 values in the same cell. Here is a typical cell: (obviously you can disregard the COL and ROW references) COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 ROW-4 8-6-045-012 So what I want to do is to create a 2 MORE new rows to read like this: COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 251254 Floyd Daniels ROW-4 8-6-045-012 251254 Floyd Daniels How can this be done? TIA for your replies. Phil. |
#3
|
|||
|
|||
OOPS! I didn't explain it correctly - RESTATING PROBLEM
Anne,
You know, as I re-read this now, I realize that I did not correctly state my case. This is how it looks below, graphically speaking (Row 1 contains the col. headings): Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels 7-5-065-012 8-6-045-012 Row-3 7-9-001-105 036584 James Clark Row-4 8-5-900-012 214566 Mary Jones As you can see what is occuring, is that the 2nd row ACTUALLY contains 3 values in the same cell. So, if you navigated to cell B2, and to hit F2 and look in the edit field above, it would look like this: 8-5-012-045 7-5-065-012 8-6-045-012 Where ALL 3 values are stacked up in the SAME cell window. So what I WANT to do is to take the value that resides in B2, and create 2 NEW rows below it, then copy the other values from C2 and D2, and paste them on the new 2nd and 3rd rows. So my NEW output will look like this: Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels Row-3 7-5-065-012 251254 Floyd Daniels Row-4 8-6-045-012 251254 Floyd Daniels Row-5 7-9-001-105 036584 James Clark Row-6 8-5-900-012 214566 Mary Jones FWIW: Incidentally, if you copied the cell B2 to a text editor, you will also see the 3 values like this, with the quotes at the end. "8-5-012-045 7-5-065-012 8-6-045-012" But if you paste it in Access it shows something like this: "8-5-012-045*7-5-065-012*8-6-045-012" Note: I am using the asterisk character to show the location of the ANSI (CHAR 10) character, which looks like a small square. Does that explain it better? I apologize for mis-representing my OP in the 1st place. I hope that you all can help me on this, as there are over a 100 of these on just this one sheet, and I have 3 or more of these to do. TIA again for your replies! Phil. "Anne Troy" wrote: Try this, Phil: http://www.officearticles.com/excel/...soft_excel.htm ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Hello, I have a cell that has 3 values in it, and want to BREAK it up so that instead, I will get 2 MORE NEW rows, for a total now of 3 rows. I believe the values were inserted into the cell using the CTRL+ENTER key combination. There is a non-printable character (ANSI 0010) visible in the EDIT window to make the new line. Also, there are instances where it may be only 2 values (which occurs MOST of the time), or other instances where there may be as much as 5 values in the same cell. Here is a typical cell: (obviously you can disregard the COL and ROW references) COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 ROW-4 8-6-045-012 So what I want to do is to create a 2 MORE new rows to read like this: COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 251254 Floyd Daniels ROW-4 8-6-045-012 251254 Floyd Daniels How can this be done? TIA for your replies. Phil. |
#4
|
|||
|
|||
OOPS! I didn't explain it correctly - RESTATING PROBLEM
Ouch, Phil. I'd be getting my butt over to the Excel beginner VBA group.
Possibly even upload a copy of your file or a piece of it and provide a link. (Tho many won't look at attachments, there are those who will.) Likely, there's some coder out there who can at least get you into the position I THOUGHT you were in, and you could go from there. :) ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Anne, You know, as I re-read this now, I realize that I did not correctly state my case. This is how it looks below, graphically speaking (Row 1 contains the col. headings): Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels 7-5-065-012 8-6-045-012 Row-3 7-9-001-105 036584 James Clark Row-4 8-5-900-012 214566 Mary Jones As you can see what is occuring, is that the 2nd row ACTUALLY contains 3 values in the same cell. So, if you navigated to cell B2, and to hit F2 and look in the edit field above, it would look like this: 8-5-012-045 7-5-065-012 8-6-045-012 Where ALL 3 values are stacked up in the SAME cell window. So what I WANT to do is to take the value that resides in B2, and create 2 NEW rows below it, then copy the other values from C2 and D2, and paste them on the new 2nd and 3rd rows. So my NEW output will look like this: Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels Row-3 7-5-065-012 251254 Floyd Daniels Row-4 8-6-045-012 251254 Floyd Daniels Row-5 7-9-001-105 036584 James Clark Row-6 8-5-900-012 214566 Mary Jones FWIW: Incidentally, if you copied the cell B2 to a text editor, you will also see the 3 values like this, with the quotes at the end. "8-5-012-045 7-5-065-012 8-6-045-012" But if you paste it in Access it shows something like this: "8-5-012-045*7-5-065-012*8-6-045-012" Note: I am using the asterisk character to show the location of the ANSI (CHAR 10) character, which looks like a small square. Does that explain it better? I apologize for mis-representing my OP in the 1st place. I hope that you all can help me on this, as there are over a 100 of these on just this one sheet, and I have 3 or more of these to do. TIA again for your replies! Phil. "Anne Troy" wrote: Try this, Phil: http://www.officearticles.com/excel/...soft_excel.htm ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Hello, I have a cell that has 3 values in it, and want to BREAK it up so that instead, I will get 2 MORE NEW rows, for a total now of 3 rows. I believe the values were inserted into the cell using the CTRL+ENTER key combination. There is a non-printable character (ANSI 0010) visible in the EDIT window to make the new line. Also, there are instances where it may be only 2 values (which occurs MOST of the time), or other instances where there may be as much as 5 values in the same cell. Here is a typical cell: (obviously you can disregard the COL and ROW references) COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 ROW-4 8-6-045-012 So what I want to do is to create a 2 MORE new rows to read like this: COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 251254 Floyd Daniels ROW-4 8-6-045-012 251254 Floyd Daniels How can this be done? TIA for your replies. Phil. |
#5
|
|||
|
|||
OOPS! I didn't explain it correctly - RESTATING PROBLEM
OK. Anne, I will try doing that.
Thanks. "Anne Troy" wrote: Ouch, Phil. I'd be getting my butt over to the Excel beginner VBA group. Possibly even upload a copy of your file or a piece of it and provide a link. (Tho many won't look at attachments, there are those who will.) Likely, there's some coder out there who can at least get you into the position I THOUGHT you were in, and you could go from there. :) ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Anne, You know, as I re-read this now, I realize that I did not correctly state my case. This is how it looks below, graphically speaking (Row 1 contains the col. headings): Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels 7-5-065-012 8-6-045-012 Row-3 7-9-001-105 036584 James Clark Row-4 8-5-900-012 214566 Mary Jones As you can see what is occuring, is that the 2nd row ACTUALLY contains 3 values in the same cell. So, if you navigated to cell B2, and to hit F2 and look in the edit field above, it would look like this: 8-5-012-045 7-5-065-012 8-6-045-012 Where ALL 3 values are stacked up in the SAME cell window. So what I WANT to do is to take the value that resides in B2, and create 2 NEW rows below it, then copy the other values from C2 and D2, and paste them on the new 2nd and 3rd rows. So my NEW output will look like this: Col- A Col - B Col - C Col-D Row-1 Tract_No Parcel_ID Owner Row-2 8-5-012-045 251254 Floyd Daniels Row-3 7-5-065-012 251254 Floyd Daniels Row-4 8-6-045-012 251254 Floyd Daniels Row-5 7-9-001-105 036584 James Clark Row-6 8-5-900-012 214566 Mary Jones FWIW: Incidentally, if you copied the cell B2 to a text editor, you will also see the 3 values like this, with the quotes at the end. "8-5-012-045 7-5-065-012 8-6-045-012" But if you paste it in Access it shows something like this: "8-5-012-045*7-5-065-012*8-6-045-012" Note: I am using the asterisk character to show the location of the ANSI (CHAR 10) character, which looks like a small square. Does that explain it better? I apologize for mis-representing my OP in the 1st place. I hope that you all can help me on this, as there are over a 100 of these on just this one sheet, and I have 3 or more of these to do. TIA again for your replies! Phil. "Anne Troy" wrote: Try this, Phil: http://www.officearticles.com/excel/...soft_excel.htm ************ Anne Troy www.OfficeArticles.com "Phil" wrote in message ... Hello, I have a cell that has 3 values in it, and want to BREAK it up so that instead, I will get 2 MORE NEW rows, for a total now of 3 rows. I believe the values were inserted into the cell using the CTRL+ENTER key combination. There is a non-printable character (ANSI 0010) visible in the EDIT window to make the new line. Also, there are instances where it may be only 2 values (which occurs MOST of the time), or other instances where there may be as much as 5 values in the same cell. Here is a typical cell: (obviously you can disregard the COL and ROW references) COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 ROW-4 8-6-045-012 So what I want to do is to create a 2 MORE new rows to read like this: COL- A COL - B COL - C ROW-1 Tract_No Parcel_ID Owner ROW-2 8-5-012-045 251254 Floyd Daniels ROW-3 7-5-065-012 251254 Floyd Daniels ROW-4 8-6-045-012 251254 Floyd Daniels How can this be done? TIA for your replies. Phil. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
finding cell values | Excel Discussion (Misc queries) | |||
find partial values in cell | Excel Worksheet Functions | |||
how to make bmp or jpgs graphics be treated as cell values | Excel Discussion (Misc queries) | |||
Can solver be used to make a cell equal to another cell | Excel Worksheet Functions | |||
Continuall Add ing values in a cell | Excel Discussion (Misc queries) |