is there a problem with hyperlink in excel 2003
 

i am getting an error when trying to hyperlink from one page in a workbook to
another page in the same workbook. the error simply states that "cannot open
the specified file"
is there a way to fix this???

is there a problem with hyperlink in excel 2003
 

At a guess I would say that you have omitted the # from the sheetname
if it is in the same workbook, and so the formula is trying to open a
file with the name of the worksheet you are trying to jump to.

Can you post your formula here and we'll be able to comment more
accurately?

Pete

is there a problem with hyperlink in excel 2003
 

Share what you used for the hyperlink and how you created it (Insert|Hyperlink
or =hyperlink()).

Karenatallied wrote:

i am getting an error when trying to hyperlink from one page in a workbook to
another page in the same workbook. the error simply states that "cannot open
the specified file"
is there a way to fix this???

--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

is there a problem with hyperlink in excel 2003
 

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

=HYPERLINK("#"&CELL("address",'YTD Income Summary - ANY'!A1),"ClickMe")

should go to A1 of 'YTD Income Summary - ANY'

(And you said that this is all internal to the workbook--so that name isn't
important.)



Karenatallied wrote:

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson


--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

i copied and pasted your formula below into my worksheet and now when i hit
enter to accept it, it opens a "open" dialog box. if i click on the folders
to find the workbook again, it causes excel to shut down. just a note, i am
running F9 on this machine, would that interfere at all with this???


"Dave Peterson" wrote:

=HYPERLINK("#"&CELL("address",'YTD Income Summary - ANY'!A1),"ClickMe")

should go to A1 of 'YTD Income Summary - ANY'

(And you said that this is all internal to the workbook--so that name isn't
important.)



Karenatallied wrote:

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson


--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

I have no idea what F9 is.

Try changing (temporarily) the name of worksheet "ytd income summary - any" to A
(just a single letter).

Then use this:
=HYPERLINK("#"&CELL("address",a!A1),"ClickMe")

Then rename the sheet to what you want.

There's a difference between what you wrote in your message and what that
worksheet is called in real life.

Karenatallied wrote:

i copied and pasted your formula below into my worksheet and now when i hit
enter to accept it, it opens a "open" dialog box. if i click on the folders
to find the workbook again, it causes excel to shut down. just a note, i am
running F9 on this machine, would that interfere at all with this???

"Dave Peterson" wrote:

=HYPERLINK("#"&CELL("address",'YTD Income Summary - ANY'!A1),"ClickMe")

should go to A1 of 'YTD Income Summary - ANY'

(And you said that this is all internal to the workbook--so that name isn't
important.)



Karenatallied wrote:

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson


--

Dave Peterson


--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

I did as you suggested and voila, it worked. i was able to rename the
worksheet back to it's original name and it still works. thanks so much for
your time and help in getting this to work for me!!! i truly appreciate it.

btw, F9 is a program that works to import our accounting software
information (GL balances and such) into excel worksheets to be calculated and
further manipulated.

"Dave Peterson" wrote:

I have no idea what F9 is.

Try changing (temporarily) the name of worksheet "ytd income summary - any" to A
(just a single letter).

Then use this:
=HYPERLINK("#"&CELL("address",a!A1),"ClickMe")

Then rename the sheet to what you want.

There's a difference between what you wrote in your message and what that
worksheet is called in real life.

Karenatallied wrote:

i copied and pasted your formula below into my worksheet and now when i hit
enter to accept it, it opens a "open" dialog box. if i click on the folders
to find the workbook again, it causes excel to shut down. just a note, i am
running F9 on this machine, would that interfere at all with this???

"Dave Peterson" wrote:

=HYPERLINK("#"&CELL("address",'YTD Income Summary - ANY'!A1),"ClickMe")

should go to A1 of 'YTD Income Summary - ANY'

(And you said that this is all internal to the workbook--so that name isn't
important.)



Karenatallied wrote:

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson


--

Dave Peterson


--

Dave Peterson

is there a problem with hyperlink in excel 2003
 

Glad you got it working. (Sometimes, those typos are the hardest things to
find.)

Karenatallied wrote:

I did as you suggested and voila, it worked. i was able to rename the
worksheet back to it's original name and it still works. thanks so much for
your time and help in getting this to work for me!!! i truly appreciate it.

btw, F9 is a program that works to import our accounting software
information (GL balances and such) into excel worksheets to be calculated and
further manipulated.

"Dave Peterson" wrote:

I have no idea what F9 is.

Try changing (temporarily) the name of worksheet "ytd income summary - any" to A
(just a single letter).

Then use this:
=HYPERLINK("#"&CELL("address",a!A1),"ClickMe")

Then rename the sheet to what you want.

There's a difference between what you wrote in your message and what that
worksheet is called in real life.

Karenatallied wrote:

i copied and pasted your formula below into my worksheet and now when i hit
enter to accept it, it opens a "open" dialog box. if i click on the folders
to find the workbook again, it causes excel to shut down. just a note, i am
running F9 on this machine, would that interfere at all with this???

"Dave Peterson" wrote:

=HYPERLINK("#"&CELL("address",'YTD Income Summary - ANY'!A1),"ClickMe")

should go to A1 of 'YTD Income Summary - ANY'

(And you said that this is all internal to the workbook--so that name isn't
important.)



Karenatallied wrote:

I've been trying to work these suggestions into my formula but i'm not sure
if i am understanding what each argument means to enter it properly.

=HYPERLINK - i understand is the formula

("#"&CELL - does this represent something else other than what it
is... meaning
do i type this in as is or am i supposed to replace
it with an actual cell
reference?

("address",sheetone!C5), - i took this to mean the actual path to the
worksheet and
cell i'm trying to link to.. whe
("address", - means the workbook the sheets are located in

sheetone!C5), - means the sheet name and cell reference
perhaps this is where my mistake is?

sheetone!C5) - being the text in the linked to worksheet/cell being used
as a name
for the hyperlink

so this what i came up with.... but i get a #VALUE! error

=HYPERLINK("#"&CELL("New York",'YTD Income-Summary -
Cons'!A1),"Consolidated")

where "New York" is the workbook both sheets are in
where 'YTD Income-Summary - Cons' is the worksheet i would like to link to
where !A1 is the cell i would like to link to
where "Consolidated" is the name i would like to name the link on the link
from
worksheet

can you tell what it is i'm doing wrong?

thanks.

"Dave Peterson" wrote:

David McRitchie posted this and it might help you:

=HYPERLINK("#"&CELL("address",C5),C5)
=HYPERLINK("#"&CELL("address",sheetone!C5),sheeton e!C5)
=HYPERLINK("#"&CELL("address",'sheet two'!C5),'sheet two'!C5)

Karenatallied wrote:

Hi Guys,

the scenario is as follows:

i am trying to link from a "Table of Contents" sheet to cell "A1" in a sheet
named "YTD Income Summary - ANY" and naming the link cell "New York Only".
Both the "Table of Contents" sheet and the "YTD Income Summary - ANY" sheet
are in the same workbook named "New York".

I used the HYPERLINK function shown below:
=HYPERLINK('YTD Income-Summary - ANY'!A1,"New York Only")

and also tried manually editing the formula as follows:
=HYPERLINK("[new york]'YTD Income-Summary - Cons'!A1","Consolidated")

where the sheet being linked to is "YTD Income-Summary - Cons", the link
cell is named "Consolidated" on the "Table of Contents" sheet and the
workbook containing both sheets is named "New York"

I get the same error message in both situations.

any insight would be appreciated...

Thanks :)

--

Dave Peterson


--

Dave Peterson


--

Dave Peterson


--

Dave Peterson