Copying Named Range
 

there seem to be a lot of postings to do with Named Range Copying ... but I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a copy of
the named range by simply 'pasting' the named range without having to go to
the worksheet and copy the named range, then go back to my first worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?

Copying Named Range
 

You're a little unclear here.

Do you want the named range to WB specific or Sheet specific?

Meaning ... will the range reference a group of cells on *only one* sheet,
or do you want the same name used to reference identical ranges on each
individual sheet?
--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
there seem to be a lot of postings to do with Named Range Copying ... but I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a copy of
the named range by simply 'pasting' the named range without having to go to
the worksheet and copy the named range, then go back to my first worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?

Copying Named Range
 

The named ranges will be unique, on a specific sheet, but visible across the
whole workbook. Many thanks for your help!

"RagDyeR" wrote:

You're a little unclear here.

Do you want the named range to WB specific or Sheet specific?

Meaning ... will the range reference a group of cells on *only one* sheet,
or do you want the same name used to reference identical ranges on each
individual sheet?
--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
there seem to be a lot of postings to do with Named Range Copying ... but I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a copy of
the named range by simply 'pasting' the named range without having to go to
the worksheet and copy the named range, then go back to my first worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?

Copying Named Range
 

AFAIK, the only way to accomplish this is to create an array formula.

Say you've named the range A1 to A10 on Sheet1 as "test".

On any other sheet in the WB, select 10 cells down a column anywhere.

Then, type in:
=test

And use CSE (<Ctrl <Shift <Enter), to enter it as an *array*.

This will duplicate the 10 cells from A1 to A10 on Sheet1.

If you only selected, say 5 cells down a column, and then hit CSE after
entering the range name, you'll only return the first 5 cells of the
original range.

So, you can copy part of the original range if necessary,
*BUT*
you'll now have an array of data that can only be revised by revising the
*entire* array!


--
HTH,

RD

---------------------------------------------------------------------------
Please keep all correspondence within the NewsGroup, so all may benefit !
---------------------------------------------------------------------------
"Blinkinhek" wrote in message
...
The named ranges will be unique, on a specific sheet, but visible across
the
whole workbook. Many thanks for your help!

"RagDyeR" wrote:

You're a little unclear here.

Do you want the named range to WB specific or Sheet specific?

Meaning ... will the range reference a group of cells on *only one*
sheet,
or do you want the same name used to reference identical ranges on each
individual sheet?
--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
there seem to be a lot of postings to do with Named Range Copying ... but
I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a copy
of
the named range by simply 'pasting' the named range without having to go
to
the worksheet and copy the named range, then go back to my first
worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies
the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?

Copying Named Range
 

Super ... that works for me !
many thanks

"RagDyer" wrote:

AFAIK, the only way to accomplish this is to create an array formula.

Say you've named the range A1 to A10 on Sheet1 as "test".

On any other sheet in the WB, select 10 cells down a column anywhere.

Then, type in:
=test

And use CSE (<Ctrl <Shift <Enter), to enter it as an *array*.

This will duplicate the 10 cells from A1 to A10 on Sheet1.

If you only selected, say 5 cells down a column, and then hit CSE after
entering the range name, you'll only return the first 5 cells of the
original range.

So, you can copy part of the original range if necessary,
*BUT*
you'll now have an array of data that can only be revised by revising the
*entire* array!


--
HTH,

RD

---------------------------------------------------------------------------
Please keep all correspondence within the NewsGroup, so all may benefit !
---------------------------------------------------------------------------
"Blinkinhek" wrote in message
...
The named ranges will be unique, on a specific sheet, but visible across
the
whole workbook. Many thanks for your help!

"RagDyeR" wrote:

You're a little unclear here.

Do you want the named range to WB specific or Sheet specific?

Meaning ... will the range reference a group of cells on *only one*
sheet,
or do you want the same name used to reference identical ranges on each
individual sheet?
--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
there seem to be a lot of postings to do with Named Range Copying ... but
I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a copy
of
the named range by simply 'pasting' the named range without having to go
to
the worksheet and copy the named range, then go back to my first
worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies
the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?

Copying Named Range
 

You're welcome, and appreciate the feed-back.

--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
Super ... that works for me !
many thanks

"RagDyer" wrote:

AFAIK, the only way to accomplish this is to create an array formula.

Say you've named the range A1 to A10 on Sheet1 as "test".

On any other sheet in the WB, select 10 cells down a column anywhere.

Then, type in:
=test

And use CSE (<Ctrl <Shift <Enter), to enter it as an *array*.

This will duplicate the 10 cells from A1 to A10 on Sheet1.

If you only selected, say 5 cells down a column, and then hit CSE after
entering the range name, you'll only return the first 5 cells of the
original range.

So, you can copy part of the original range if necessary,
*BUT*
you'll now have an array of data that can only be revised by revising the
*entire* array!


--
HTH,

RD

---------------------------------------------------------------------------
Please keep all correspondence within the NewsGroup, so all may benefit !
---------------------------------------------------------------------------
"Blinkinhek" wrote in message
...
The named ranges will be unique, on a specific sheet, but visible across
the
whole workbook. Many thanks for your help!

"RagDyeR" wrote:

You're a little unclear here.

Do you want the named range to WB specific or Sheet specific?

Meaning ... will the range reference a group of cells on *only one*
sheet,
or do you want the same name used to reference identical ranges on each
individual sheet?
--

Regards,

RD
-----------------------------------------------------------------------------------------------
Please keep all correspondence within the Group, so all may benefit !
-----------------------------------------------------------------------------------------------

"Blinkinhek" wrote in message
...
there seem to be a lot of postings to do with Named Range Copying ...
but
I
have not found a simple answer to this...
I have a set of named ranges (data1, data2 etc) on one worksheet.
On a second worksheet in that workbook I want to be able to insert a
copy
of
the named range by simply 'pasting' the named range without having to
go
to
the worksheet and copy the named range, then go back to my first
worksheet
and pasting....(am I making sense?)

I can do this on a single cell Name by typing '=Name' and this applies
the
single cell data, but this does not accept a named range.

I am sure there is a simple way of doing this ... anyone help?