Hide Group Boxes Around Option Buttons
 

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

Hide Group Boxes Around Option Buttons
 

Hi,

There are several places you could put this code, here's one

Private Sub Worksheet_Activate()
ActiveSheet.GroupBoxes.Visible = False
End Sub

Mike

"salqa" wrote:

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

Hide Group Boxes Around Option Buttons
 

Thanks, Mike, but I don't understand - would you elaborate as to what you
mean by "several places"? Also, when you reference "code", is that the same
as "formula"? Your help is appreciated!

"Mike H" wrote:

Hi,

There are several places you could put this code, here's one

Private Sub Worksheet_Activate()
ActiveSheet.GroupBoxes.Visible = False
End Sub

Mike

"salqa" wrote:

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

Hide Group Boxes Around Option Buttons
 

Hi,

Once the boxes are invisible then they remain invisible so you could simply
put the line of code in the immediate window.

ALT+Fll and then Ctrl + G to open immediate window.
Paste the code in and hit enter and the boxes on the active sheet become
invisible. Make each sheet the active one by selecting it's tab and repeat
the above.

The example I gave you was to use event code.
Alt + F11 to open VB editor. Double click the sheet name where you have
boxes and paste the 3 lines in on the right. Doing it this way the next time
you activate the sheet the box will become invisible. There's a slight
penalty for doing it that way in that the code runs every time you activate a
sheet even though the boxes are already invisible but the penalty is trivial.

And the one last way is this. Alt + Fll to open VB editor. Double click
'This workbook' and paste this in on the right

Private Sub Workbook_Open()
For Each Sheet In ThisWorkbook.Worksheets
Sheet.GroupBoxes.Visible = False
Next
End Sub

When the workbook is opened all boxes on all sheets become invisible

HTH.

Mike

"salqa" wrote:

Thanks, Mike, but I don't understand - would you elaborate as to what you
mean by "several places"? Also, when you reference "code", is that the same
as "formula"? Your help is appreciated!

"Mike H" wrote:

Hi,

There are several places you could put this code, here's one

Private Sub Worksheet_Activate()
ActiveSheet.GroupBoxes.Visible = False
End Sub

Mike

"salqa" wrote:

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

Hide Group Boxes Around Option Buttons
 

Thank you very very much again, Mike! You're a tremendous help!!

"Mike H" wrote:

Hi,

Once the boxes are invisible then they remain invisible so you could simply
put the line of code in the immediate window.

ALT+Fll and then Ctrl + G to open immediate window.
Paste the code in and hit enter and the boxes on the active sheet become
invisible. Make each sheet the active one by selecting it's tab and repeat
the above.

The example I gave you was to use event code.
Alt + F11 to open VB editor. Double click the sheet name where you have
boxes and paste the 3 lines in on the right. Doing it this way the next time
you activate the sheet the box will become invisible. There's a slight
penalty for doing it that way in that the code runs every time you activate a
sheet even though the boxes are already invisible but the penalty is trivial.

And the one last way is this. Alt + Fll to open VB editor. Double click
'This workbook' and paste this in on the right

Private Sub Workbook_Open()
For Each Sheet In ThisWorkbook.Worksheets
Sheet.GroupBoxes.Visible = False
Next
End Sub

When the workbook is opened all boxes on all sheets become invisible

HTH.

Mike

"salqa" wrote:

Thanks, Mike, but I don't understand - would you elaborate as to what you
mean by "several places"? Also, when you reference "code", is that the same
as "formula"? Your help is appreciated!

"Mike H" wrote:

Hi,

There are several places you could put this code, here's one

Private Sub Worksheet_Activate()
ActiveSheet.GroupBoxes.Visible = False
End Sub

Mike

"salqa" wrote:

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

Hide Group Boxes Around Option Buttons
 

Your welcome

"salqa" wrote:

Thank you very very much again, Mike! You're a tremendous help!!

"Mike H" wrote:

Hi,

Once the boxes are invisible then they remain invisible so you could simply
put the line of code in the immediate window.

ALT+Fll and then Ctrl + G to open immediate window.
Paste the code in and hit enter and the boxes on the active sheet become
invisible. Make each sheet the active one by selecting it's tab and repeat
the above.

The example I gave you was to use event code.
Alt + F11 to open VB editor. Double click the sheet name where you have
boxes and paste the 3 lines in on the right. Doing it this way the next time
you activate the sheet the box will become invisible. There's a slight
penalty for doing it that way in that the code runs every time you activate a
sheet even though the boxes are already invisible but the penalty is trivial.

And the one last way is this. Alt + Fll to open VB editor. Double click
'This workbook' and paste this in on the right

Private Sub Workbook_Open()
For Each Sheet In ThisWorkbook.Worksheets
Sheet.GroupBoxes.Visible = False
Next
End Sub

When the workbook is opened all boxes on all sheets become invisible

HTH.

Mike

"salqa" wrote:

Thanks, Mike, but I don't understand - would you elaborate as to what you
mean by "several places"? Also, when you reference "code", is that the same
as "formula"? Your help is appreciated!

"Mike H" wrote:

Hi,

There are several places you could put this code, here's one

Private Sub Worksheet_Activate()
ActiveSheet.GroupBoxes.Visible = False
End Sub

Mike

"salqa" wrote:

I need to hide the group box (lines and all) around each set of option
(radio) buttons for an electronic form that goes to customers. It's just for
aesthetic purposes - mgt doesn't want to see the lines! Any/all help is
greatly appreciated.

hiding group boxes around option buttons - excel
 

I would like to hide the group boxes around option buttons. I have tried the methods outlined by Mike and none of them worked for my spreadsheet. There are approx. 160 group boxes on my spreadsheet.
As a test I copied a small portion of the grounp boxes to another spreadsheet and I'm please to say that Mike's suggestions did work.
I would appreciate very much if anyone can offer any suggestions as to what may be 'going wrong'?
Thanks.

hiding group boxes around option buttons - excel
 

activesheet.groupboxes.visible = false
will work for a small (whatever that means) number of groupboxes.

But if you have lots, you can use:

dim GBX as groupbox
for each GBX in activesheet.groupboxes
gbx.visible = false
next gbx



Paul, Norman wrote:

I would like to hide the group boxes around option buttons. I have tried the methods outlined by Mike and none of them worked for my spreadsheet. There are approx. 160 group boxes on my spreadsheet.
As a test I copied a small portion of the grounp boxes to another spreadsheet and I'm please to say that Mike's suggestions did work.
I would appreciate very much if anyone can offer any suggestions as to what may be 'going wrong'?
Thanks.

--

Dave Peterson

hiding group boxes around option buttons - excel
 

I tried inserting this code into the immediate field and kept getting the
Next without For error.

"Dave Peterson" wrote:

activesheet.groupboxes.visible = false
will work for a small (whatever that means) number of groupboxes.

But if you have lots, you can use:

dim GBX as groupbox
for each GBX in activesheet.groupboxes
gbx.visible = false
next gbx



Paul, Norman wrote:

I would like to hide the group boxes around option buttons. I have tried the methods outlined by Mike and none of them worked for my spreadsheet. There are approx. 160 group boxes on my spreadsheet.
As a test I copied a small portion of the grounp boxes to another spreadsheet and I'm please to say that Mike's suggestions did work.
I would appreciate very much if anyone can offer any suggestions as to what may be 'going wrong'?
Thanks.

--

Dave Peterson

hiding group boxes around option buttons - excel
 

I think you're going to have to post the code you used.

Patrick Wilkins wrote:

I tried inserting this code into the immediate field and kept getting the
Next without For error.

"Dave Peterson" wrote:

activesheet.groupboxes.visible = false
will work for a small (whatever that means) number of groupboxes.

But if you have lots, you can use:

dim GBX as groupbox
for each GBX in activesheet.groupboxes
gbx.visible = false
next gbx



Paul, Norman wrote:

I would like to hide the group boxes around option buttons. I have tried the methods outlined by Mike and none of them worked for my spreadsheet. There are approx. 160 group boxes on my spreadsheet.
As a test I copied a small portion of the grounp boxes to another spreadsheet and I'm please to say that Mike's suggestions did work.
I would appreciate very much if anyone can offer any suggestions as to what may be 'going wrong'?
Thanks.

--

Dave Peterson


--

Dave Peterson