Search for values in a sheet and copy found records one after theother in another sheet
 

Dear Experts:

Below macro ...
(1)... creates a user-defined search dialog box and ...
(2)... searches for data records that are listed in a
'xlsheetveryhidden'-worksheet (Sheet name = list)... and
(3)... if found, the data record is copied into the active cell of the
current worksheet.

I would like to have this macro rewritten so that ...
.... Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc. and so forth no matter which cell is
activated.

Is this possible? Help is very much appreciated. Thank you very much
in advance.

Regards, Andreas


Sub Find_it_and_copy_it()
Dim varWhat
Dim rngfound As Range
varWhat = Application.InputBox("Enter text to find")
Set rngfound = Sheets("list").Cells.Find(what:=varWhat,
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
If Not rngfound Is Nothing Then
rngfound.EntireRow.Copy Cells(ActiveCell.Row, 1)
End If
End Sub

Search for values in a sheet and copy found records one after theother in another sheet
 

On 14 Jun., 09:55, AndreasHermle
wrote:
Dear Experts:

Below macro ...
(1)... creates a user-defined search dialog box and ...
(2)... searches for data records that are listed in a
'xlsheetveryhidden'-worksheet (Sheet name = list)... and
(3)... if found, the data record is copied into the active cell of the
current worksheet.

I would like to have this macro rewritten so that ...
... Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc. and so forth no matter which cell is
activated.

Is this possible? Help is very much appreciated. Thank you very much
in advance.

Regards, Andreas

Sub Find_it_and_copy_it()
* *Dim varWhat
* *Dim rngfound As Range
* *varWhat = Application.InputBox("Enter text to find")
* *Set rngfound = Sheets("list").Cells.Find(what:=varWhat,
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* *If Not rngfound Is Nothing Then
* * * rngfound.EntireRow.Copy Cells(ActiveCell.Row, 1)
* *End If
End Sub

This should do it:

Sub Find_it_and_copy_it()
Dim varWhat
Dim rngFound As Range
Dim R As Long
Dim fFound As Range

varWhat = Application.InputBox("Enter text to find")
Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
Set fFound = rngFound
If Not rngFound Is Nothing Then
Do
R = R + 1
rngFound.EntireRow.Copy Cells(R, 1)
Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
Loop Until rngFound.Address = fFound.Address
End If
End Sub

Search for values in a sheet and copy found records one after theother in another sheet
 

On 15 Jun., 16:05, Per Jessen wrote:
On 14 Jun., 09:55, AndreasHermle
wrote:





Dear Experts:

Below macro ...
(1)... creates a user-defined search dialog box and ...
(2)... searches for data records that are listed in a
'xlsheetveryhidden'-worksheet (Sheet name = list)... and
(3)... if found, the data record is copied into the active cell of the
current worksheet.

I would like to have this macro rewritten so that ...
... Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc. and so forth no matter which cell is
activated.

Is this possible? Help is very much appreciated. Thank you very much
in advance.

Regards, Andreas

Sub Find_it_and_copy_it()
* *Dim varWhat
* *Dim rngfound As Range
* *varWhat = Application.InputBox("Enter text to find")
* *Set rngfound = Sheets("list").Cells.Find(what:=varWhat,
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* *If Not rngfound Is Nothing Then
* * * rngfound.EntireRow.Copy Cells(ActiveCell.Row, 1)
* *End If
End Sub

This should do it:

Sub Find_it_and_copy_it()
* *Dim varWhat
* *Dim rngFound As Range
* *Dim R As Long
* *Dim fFound As Range

* *varWhat = Application.InputBox("Enter text to find")
* *Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
* * * * LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* *Set fFound = rngFound
* *If Not rngFound Is Nothing Then
* * * Do
* * * * R = R + 1
* * * * rngFound.EntireRow.Copy Cells(R, 1)
* * * * Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
* * Loop Until rngFound.Address = fFound.Address
End If
End Sub- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

Hi Per,

thank you very much for your quick support. I am afraid to tell you
that the code keeps writing all the found values right into A1, i.e.
overwriting the values over and over.
Any idea why?

Regards, Andreas

Search for values in a sheet and copy found records one after theother in another sheet
 

On 15 Jun., 16:52, AndreasHermle
wrote:
On 15 Jun., 16:05, Per Jessen wrote:





On 14 Jun., 09:55, AndreasHermle
wrote:

Dear Experts:

Below macro ...
(1)... creates a user-defined search dialog box and ...
(2)... searches for data records that are listed in a
'xlsheetveryhidden'-worksheet (Sheet name = list)... and
(3)... if found, the data record is copied into the active cell of the
current worksheet.

I would like to have this macro rewritten so that ...
... Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc. and so forth no matter which cell is
activated.

Is this possible? Help is very much appreciated. Thank you very much
in advance.

Regards, Andreas

Sub Find_it_and_copy_it()
* *Dim varWhat
* *Dim rngfound As Range
* *varWhat = Application.InputBox("Enter text to find")
* *Set rngfound = Sheets("list").Cells.Find(what:=varWhat,
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* *If Not rngfound Is Nothing Then
* * * rngfound.EntireRow.Copy Cells(ActiveCell.Row, 1)
* *End If
End Sub

This should do it:

Sub Find_it_and_copy_it()
* *Dim varWhat
* *Dim rngFound As Range
* *Dim R As Long
* *Dim fFound As Range

* *varWhat = Application.InputBox("Enter text to find")
* *Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
* * * * LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* *Set fFound = rngFound
* *If Not rngFound Is Nothing Then
* * * Do
* * * * R = R + 1
* * * * rngFound.EntireRow.Copy Cells(R, 1)
* * * * Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
* * Loop Until rngFound.Address = fFound.Address
End If
End Sub- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

Hi Per,

thank you very much for your quick support. I am afraid to tell you
that the code keeps writing all the found values right into A1, i.e.
overwriting the values over and over.
Any idea why?

Regards, Andreas- Skjul tekst i anførselstegn -

- Vis tekst i anførselstegn -

Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per

Search for values in a sheet and copy found records one after the other in another sheet
 

I also tested Per's code and it worked as advertised.


Gord Dibben MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:

Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per

Search for values in a sheet and copy found records one after theother in another sheet
 

On 15 Jun., 21:06, Gord Dibben wrote:
I also tested Per's code and it worked as advertised.

Gord Dibben * * MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:



Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per- Zitierten Text ausblenden -

- Zitierten Text anzeigen -


Dear Gord and Per,

thank you very much for your support. This is really strange. These
are the sample values in the 'list'-sheet:
1754 Martin
1755 Gordon
1756 Jim
1757 Jones

On the other sheet of the same workbook I got a macro button linked to
your code.
Whenever I press it, I am prompted to enter text, I enter either 1754,
1755, 1756 or 1757. In case of entering 1754, the entire row, i.e.
1754 Martin is pasted into the very first row of the active
worksheet.
On running the macro again, I enter 1755 and the entire row, i.e. 1755
Gordon overwrites! the first entry, i.e. 1754 Martin and so forth.

Reading your code it makes absolute sense. I will try it on another
machine and then let you know.

Till then, Regards, Andreas

Search for values in a sheet and copy found records one after the other in another sheet
 

Don't bother testing that code on another machine.

It was not designed to append results of a new search to the results of earlier
search.

Your original description left out that requirement.

Per and I thought you had duplicate data on sheet "list" and needed multiple
returns from one search.

Try this revised code which does append returns from sequential searches whether
those searches have multiple results or a single result such as you describe in
this post.

Sub Find_it_and_copy_it()
Dim varWhat
Dim rngFound As Range
Dim R As Long
Dim fFound As Range

varWhat = Application.InputBox("Enter text to find")
Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
Set fFound = rngFound
R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
If R = 1 Then R = R - 1

If Not rngFound Is Nothing Then
Do

R = R + 1
rngFound.EntireRow.Copy Cells(R, 1)
Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
Loop Until rngFound.Address = fFound.Address
End If
End Sub


Gord

On Thu, 16 Jun 2011 00:32:25 -0700 (PDT), AndreasHermle
wrote:

On 15 Jun., 21:06, Gord Dibben wrote:
I also tested Per's code and it worked as advertised.

Gord Dibben * * MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:



Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per- Zitierten Text ausblenden -

- Zitierten Text anzeigen -


Dear Gord and Per,

thank you very much for your support. This is really strange. These
are the sample values in the 'list'-sheet:
1754 Martin
1755 Gordon
1756 Jim
1757 Jones

On the other sheet of the same workbook I got a macro button linked to
your code.
Whenever I press it, I am prompted to enter text, I enter either 1754,
1755, 1756 or 1757. In case of entering 1754, the entire row, i.e.
1754 Martin is pasted into the very first row of the active
worksheet.
On running the macro again, I enter 1755 and the entire row, i.e. 1755
Gordon overwrites! the first entry, i.e. 1754 Martin and so forth.

Reading your code it makes absolute sense. I will try it on another
machine and then let you know.

Till then, Regards, Andreas

Search for values in a sheet and copy found records one after the other in another sheet
 

More than you leaving out the requirement, misinterpretation by Per and myself
of the original description might be the source.

Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc.


Gord

On Thu, 16 Jun 2011 07:39:48 -0700, Gord Dibben wrote:

Don't bother testing that code on another machine.

It was not designed to append results of a new search to the results of earlier
search.

Your original description left out that requirement.

Per and I thought you had duplicate data on sheet "list" and needed multiple
returns from one search.

Try this revised code which does append returns from sequential searches whether
those searches have multiple results or a single result such as you describe in
this post.

Sub Find_it_and_copy_it()
Dim varWhat
Dim rngFound As Range
Dim R As Long
Dim fFound As Range

varWhat = Application.InputBox("Enter text to find")
Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
Set fFound = rngFound
R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
If R = 1 Then R = R - 1

If Not rngFound Is Nothing Then
Do

R = R + 1
rngFound.EntireRow.Copy Cells(R, 1)
Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
Loop Until rngFound.Address = fFound.Address
End If
End Sub


Gord

On Thu, 16 Jun 2011 00:32:25 -0700 (PDT), AndreasHermle
wrote:

On 15 Jun., 21:06, Gord Dibben wrote:
I also tested Per's code and it worked as advertised.

Gord Dibben * * MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:



Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per- Zitierten Text ausblenden -

- Zitierten Text anzeigen -


Dear Gord and Per,

thank you very much for your support. This is really strange. These
are the sample values in the 'list'-sheet:
1754 Martin
1755 Gordon
1756 Jim
1757 Jones

On the other sheet of the same workbook I got a macro button linked to
your code.
Whenever I press it, I am prompted to enter text, I enter either 1754,
1755, 1756 or 1757. In case of entering 1754, the entire row, i.e.
1754 Martin is pasted into the very first row of the active
worksheet.
On running the macro again, I enter 1755 and the entire row, i.e. 1755
Gordon overwrites! the first entry, i.e. 1754 Martin and so forth.

Reading your code it makes absolute sense. I will try it on another
machine and then let you know.

Till then, Regards, Andreas

Search for values in a sheet and copy found records one after theother in another sheet
 

On Jun 16, 4:48*pm, Gord Dibben wrote:
More than you leaving out the requirement, misinterpretation by Per and myself
of the original description might be the source.

Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc.

Gord



On Thu, 16 Jun 2011 07:39:48 -0700, Gord Dibben wrote:
Don't bother testing that code on another machine.

It was not designed to append results of a new search to the results of earlier
search.

Your original description left out that requirement.

Per and I thought you had duplicate data on sheet "list" and needed multiple
returns from one search.

Try this revised code which does append returns from sequential searches whether
those searches have multiple results or a single result such as you describe in
this post.

Sub Find_it_and_copy_it()
* Dim varWhat
* Dim rngFound As Range
* Dim R As Long
* Dim fFound As Range

* varWhat = Application.InputBox("Enter text to find")
* Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
* * * *LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* Set fFound = rngFound
* R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
* If R = 1 Then R = R - 1

* If Not rngFound Is Nothing Then
* * *Do

* * * *R = R + 1
* * * *rngFound.EntireRow.Copy Cells(R, 1)
* * * *Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
* *Loop Until rngFound.Address = fFound.Address
End If
End Sub

Gord

On Thu, 16 Jun 2011 00:32:25 -0700 (PDT), AndreasHermle
wrote:

On 15 Jun., 21:06, Gord Dibben wrote:
I also tested Per's code and it worked as advertised.

Gord Dibben MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:

Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

Dear Gord and Per,

thank you very much for your support. This is really strange. These
are the sample values in the 'list'-sheet:
1754 * *Martin
1755 * *Gordon
1756 * *Jim
1757 * *Jones

On the other sheet of the same workbook I got a macro button linked to
your code.
Whenever I press it, I am prompted to enter text, I enter either 1754,
1755, 1756 or 1757. In case of entering 1754, the entire row, i.e.
1754 Martin is pasted into the very first row of the active
worksheet.
On running the macro again, I enter 1755 and the entire row, i.e. 1755
Gordon overwrites! the first entry, i.e. 1754 Martin and so forth.

Reading your code it makes absolute sense. I will try it on another
machine and then let you know.

Till then, Regards, Andreas- Hide quoted text -

- Show quoted text -

Gord,

great, thank you very much for the time take and your valuable help.
English being not my mother tongue I am not as good as an english
speaking person in detailing my requirements. And as you told me I
inadvertently left out an important requirement.

Anyhow, the code works just fine, although I had to comment out the
line 'If R = 1 Then R = R - 1. Leaving this line in the code results
in the overwriting of the existing pasted record. Commenting out this
line results in the code working absolutely perfectly, ie it appends
results of a new search to the results of earlier searches.

Again, thank you very much for your professional help. I really
appreciate it.

Regards, Andreas

Search for values in a sheet and copy found records one after theother in another sheet
 

On Jun 16, 4:48*pm, Gord Dibben wrote:
More than you leaving out the requirement, misinterpretation by Per and myself
of the original description might be the source.

Excel copies the first instance of a found value/data record right
into row 1 of the current worksheet. Subsequent hits should then be
copied into row 2, row 3 etc.

Gord



On Thu, 16 Jun 2011 07:39:48 -0700, Gord Dibben wrote:
Don't bother testing that code on another machine.

It was not designed to append results of a new search to the results of earlier
search.

Your original description left out that requirement.

Per and I thought you had duplicate data on sheet "list" and needed multiple
returns from one search.

Try this revised code which does append returns from sequential searches whether
those searches have multiple results or a single result such as you describe in
this post.

Sub Find_it_and_copy_it()
* Dim varWhat
* Dim rngFound As Range
* Dim R As Long
* Dim fFound As Range

* varWhat = Application.InputBox("Enter text to find")
* Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
* * * *LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* Set fFound = rngFound
* R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
* If R = 1 Then R = R - 1

* If Not rngFound Is Nothing Then
* * *Do

* * * *R = R + 1
* * * *rngFound.EntireRow.Copy Cells(R, 1)
* * * *Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
* *Loop Until rngFound.Address = fFound.Address
End If
End Sub

Gord

On Thu, 16 Jun 2011 00:32:25 -0700 (PDT), AndreasHermle
wrote:

On 15 Jun., 21:06, Gord Dibben wrote:
I also tested Per's code and it worked as advertised.

Gord Dibben MS Excel MVP

On Wed, 15 Jun 2011 11:04:33 -0700 (PDT), Per Jessen
wrote:

Hi Andreas,

It sounds very strange!

I just tested the code and it pasted each hit to a new row, always
starting from row 1 when I start a new search. Are you sure, that
there is more than one match in the 'List' sheet?

Regards, Per- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

Dear Gord and Per,

thank you very much for your support. This is really strange. These
are the sample values in the 'list'-sheet:
1754 * *Martin
1755 * *Gordon
1756 * *Jim
1757 * *Jones

On the other sheet of the same workbook I got a macro button linked to
your code.
Whenever I press it, I am prompted to enter text, I enter either 1754,
1755, 1756 or 1757. In case of entering 1754, the entire row, i.e.
1754 Martin is pasted into the very first row of the active
worksheet.
On running the macro again, I enter 1755 and the entire row, i.e. 1755
Gordon overwrites! the first entry, i.e. 1754 Martin and so forth.

Reading your code it makes absolute sense. I will try it on another
machine and then let you know.

Till then, Regards, Andreas- Hide quoted text -

- Show quoted text -

Hi Gord,

strange, I was just going to acknowledge your question by clicking on
this 5-star rating system. It is gone, how come?

regards, Andreas

Search for values in a sheet and copy found records one after the other in another sheet
 

Anyhow, the code works just fine, although I had to comment out the
line 'If R = 1 Then R = R - 1. Leaving this line in the code results
in the overwriting of the existing pasted record. Commenting out this
line results in the code working absolutely perfectly, ie it appends
results of a new search to the results of earlier searches.

Not quite perfect. With that line commented out try running the macro on a new
sheet with column A empty.

See that first search return is to A2

My attempt to correct that resulted in the overwrite.

I have revised code again to cover empty column without the overwriting.

Sub Find_it_and_copy_it()
'per jenssen jun 15, 2011
'revised by gord jun 16, 2011
Dim varWhat
Dim rngFound As Range
Dim R As Long
Dim fFound As Range

varWhat = Application.InputBox("Enter text to find")
Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
Set fFound = rngFound
R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
If R = 1 And Range("A" & R).Value = "" Then
R = R - 1
End If
If Not rngFound Is Nothing Then
Do
R = R + 1
rngFound.EntireRow.Copy Cells(R, 1)
Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
Loop Until rngFound.Address = fFound.Address
End If
End Sub


Gord


Anyhow, the code works just fine, although I had to comment out the
line 'If R = 1 Then R = R - 1. Leaving this line in the code results
in the overwriting of the existing pasted record. Commenting out this
line results in the code working absolutely perfectly, ie it appends
results of a new search to the results of earlier searches.

Search for values in a sheet and copy found records one after theother in another sheet
 

On 16 Jun., 21:55, Gord Dibben wrote:
Anyhow, the code works just fine, although I had to comment out the
line 'If R = 1 Then R = R - 1. Leaving this line in the code results
in the overwriting of the existing pasted record. Commenting out this
line results in the code working absolutely perfectly, ie it appends
results of a new search to the results of earlier searches.

Not quite perfect. *With that line commented out try running the macro on a new
sheet with column A empty.

See that first search return is to A2

My attempt to correct that resulted in the overwrite.

I have revised code again to cover empty column without the overwriting.

Sub Find_it_and_copy_it()
'per jenssen jun 15, 2011
'revised by gord jun 16, 2011
* * Dim varWhat
* * Dim rngFound As Range
* * Dim R As Long
* * Dim fFound As Range

* * varWhat = Application.InputBox("Enter text to find")
* * Set rngFound = Sheets("list").Cells.Find(what:=varWhat, _
* * * * * * * LookIn:=xlValues, lookat:=xlWhole, MatchCase:=False)
* * Set fFound = rngFound
* * R = ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Row
* * If R = 1 And Range("A" & R).Value = "" Then
* * * * R = R - 1
* * End If
* * If Not rngFound Is Nothing Then
* * * * Do
* * * * * * R = R + 1
* * * * * * rngFound.EntireRow.Copy Cells(R, 1)
* * * * * * Set rngFound = Sheets("list").Cells.FindNext(after:=rngFound)
* * * * Loop Until rngFound.Address = fFound.Address
* * End If
End Sub

Gord



Anyhow, the code works just fine, although I had to comment out the
line 'If R = 1 Then R = R - 1. Leaving this line in the code results
in the overwriting of the existing pasted record. Commenting out this
line results in the code working absolutely perfectly, ie it appends
results of a new search to the results of earlier searches.- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

Hi Gord,

great. Now it is really perfect. Works like a charm.
Thank you very much for your great and swift support. This is
professionalism.

Regards, Andreas

Search for values in a sheet and copy found records one after the other in another sheet
 

Thanks for the feedback.

Happy to assist.


Gord

On Fri, 17 Jun 2011 04:37:47 -0700 (PDT), AndreasHermle
wrote:

Hi Gord,

great. Now it is really perfect. Works like a charm.
Thank you very much for your great and swift support. This is
professionalism.

Regards, Andreas