Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before " &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in message
...
Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must appear
on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

If you put this code in the ThisWorkbook code module, it will clear the E59
cell for each user as the workbook opens.

Private Sub Workbook_Open()
Range("E59").ClearContents
End Sub

Open the VB editor and right click the ThisWorkbook listed in the project
window. Click View Code and paste the above snippet into the code window.
Then you can enter something in E59 to get it to save the file and when the
workbook opens it will automatically clear that cell. If I recall your
original post correctly, you only want the name there for print out which
occurs after the save event. If I am correct then this addition should allow
you to enter something in E59 to save your prototype file, which will be
removed upon the next opening of the file.


"Patrick Riley" wrote:

Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Before you (as the developer, not the user) save the file, you can turn off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if



Patrick Riley wrote:

Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

--

Dave Peterson

JLGWhiz:

Thanks for your response.
I tried your code, and got an error msg:

Run-time error '1004':
Cannot change part of a merged cell.

E59 is a merged cell, consisting of cells originally E59 thru O59 inclusive.
When I hit the Debug button within the err-msg window, the VB editor window
opened, and line 2 of your code was highlighted.

Also, it is my intent that the user name remain in the saved file, in
addition to appearing on the hardcopy.

"JLGWhiz" wrote:

If you put this code in the ThisWorkbook code module, it will clear the E59
cell for each user as the workbook opens.

Private Sub Workbook_Open()
Range("E59").ClearContents
End Sub

Open the VB editor and right click the ThisWorkbook listed in the project
window. Click View Code and paste the above snippet into the code window.
Then you can enter something in E59 to get it to save the file and when the
workbook opens it will automatically clear that cell. If I recall your
original post correctly, you only want the name there for print out which
occurs after the save event. If I am correct then this addition should allow
you to enter something in E59 to save your prototype file, which will be
removed upon the next opening of the file.


"Patrick Riley" wrote:

Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your code,
nothing happened:
I could save file with name-field blank. I did not see an input-box appear.
I saved file and re-opened, and got the same results: no input box, could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before " &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in message
...
Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must appear
on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before " &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt saving.
But if there is a space or anything else in E59, no input box is displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box, could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in message
...
Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left blank.
Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Excellent suggestions for the OP (especially turning off events).

One additional one- extension of JLGWhiz's response; rather than always
deleting the contents of the target cell during the workbook open event,
check it for a specific string (such as "Patrick Riley" or "Erase Me") and
only clear that cell during the workbook open event if the target cell
contains your specified string.

Best,
Keith

"Dave Peterson" wrote in message
...
Before you (as the developer, not the user) save the file, you can turn
off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if



Patrick Riley wrote:

Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must
appear on
the printed version. The user-name field is intentionally left blank.
Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

--

Dave Peterson

Just to be sure, I re-copied the code from this post. I made sure that E59
was blank (I clicked in the cell and hit the Delete key). When I tried to
close the file, I got a syntax error.
In the VB editor, Lines 1 and 2 (beginning w "Private" and "Cancel") were
highlighted in yellow, and line 5 (beginning w "Range") was selected.
Incidentally, when I first pasted the code into the right-hand pane (after
selecting "ThisWorkbook" in left pane), lines 5 thru 7 appeared in red.
Since I am not a VB programmer, I don't know the significance, if any, of the
points I raise in this paragraph.
I don't know how to turn off events, although now a later response to my
post, from Dave Peterson, provides code to do so, coupled with a coding
suggestion.

I appreciate your taking the time to help!
---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before " &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt saving.
But if there is a space or anything else in E59, no input box is displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box, could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in message
...
Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left blank.
Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Dave:
I opened VBE, hit Ctrl-G, the Immediate Window opened, I cut and pasted the
"application.enableevents = false" code (without the quote marks) into
Immediate Window. When I tried to save the file, however, the beforesave
code fired, producing the warning message to type in the name. Incidentally,
the code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "Cell E59 of sheet 'Main' must be filled in before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Also, re your suggestion to check the username, under ToolsOptionsGeneral,
my username is pjriley, so I presumed I should use "pjriley" instead of
"Patrick Riley" in the code that you provided. I tried it, and IT LET ME
SAVE THE FILE with the BLANK name field!! BUT...when I e-mailed the file to
another user and tested it at his machine under his login and application
name (making sure the VB code was still there and unchanged), it did NOT
prompt me to fill in the name field. Under ToolsOptionsGeneral, his
username was "acutti", as it should have been.
What do you make of this?
---Pat

"Dave Peterson" wrote:

Before you (as the developer, not the user) save the file, you can turn off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if



Patrick Riley wrote:

Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

--

Dave Peterson

When copying the code from the post, be careful of text wrapping.
When you see an underscore ( _ ) following a space in code, this usually
indicates that the code is continued to the next line. Let's see if this
causes a problem.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = _
InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")
Else
End If
End Sub



--

"Patrick Riley" wrote in message
...
Just to be sure, I re-copied the code from this post. I made sure that
E59
was blank (I clicked in the cell and hit the Delete key). When I tried to
close the file, I got a syntax error.
In the VB editor, Lines 1 and 2 (beginning w "Private" and "Cancel") were
highlighted in yellow, and line 5 (beginning w "Range") was selected.
Incidentally, when I first pasted the code into the right-hand pane (after
selecting "ThisWorkbook" in left pane), lines 5 thru 7 appeared in red.
Since I am not a VB programmer, I don't know the significance, if any, of
the
points I raise in this paragraph.
I don't know how to turn off events, although now a later response to my
post, from Dave Peterson, provides code to do so, coupled with a coding
suggestion.

I appreciate your taking the time to help!
---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in
message
...
Thanks to some generous help from users of this site, I, with no
Visual
Basic
knowledge, am using some VB code that requires the user to type
his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the
name
field
blank when I try to save the file in final form, ready for enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

After you type that "application.enableevents = false" into the immediate
window, you have to hit enter to run that command.

If the event fires, then you didn't do it correctly.

As for the second question, I'd guess that you did something wrong in the code.



Patrick Riley wrote:

Dave:
I opened VBE, hit Ctrl-G, the Immediate Window opened, I cut and pasted the
"application.enableevents = false" code (without the quote marks) into
Immediate Window. When I tried to save the file, however, the beforesave
code fired, producing the warning message to type in the name. Incidentally,
the code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "Cell E59 of sheet 'Main' must be filled in before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Also, re your suggestion to check the username, under ToolsOptionsGeneral,
my username is pjriley, so I presumed I should use "pjriley" instead of
"Patrick Riley" in the code that you provided. I tried it, and IT LET ME
SAVE THE FILE with the BLANK name field!! BUT...when I e-mailed the file to
another user and tested it at his machine under his login and application
name (making sure the VB code was still there and unchanged), it did NOT
prompt me to fill in the name field. Under ToolsOptionsGeneral, his
username was "acutti", as it should have been.
What do you make of this?
---Pat

"Dave Peterson" wrote:

Before you (as the developer, not the user) save the file, you can turn off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if



Patrick Riley wrote:

Thanks to some generous help from users of this site, I, with no Visual Basic
knowledge, am using some VB code that requires the user to type his/her name
into a given cell before the file can be saved, since the name must appear on
the printed version. The user-name field is intentionally left blank. Upon
attempting to save, the code presents a message to type in the name, if the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

--

Dave Peterson


--

Dave Peterson

Paul:

The Input-Box code worked like a charm, with one blip: When I click "Cancel"
in the Input Box, the Input Box closes (which is expected, and OK), but then
a Save-File window opens, allowing me to save the file without filling in the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before " &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt saving.
But if there is a space or anything else in E59, no input box is displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box, could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in message
...
Thanks to some generous help from users of this site, I, with no Visual
Basic
knowledge, am using some VB code that requires the user to type his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left blank.
Upon
attempting to save, the code presents a message to type in the name, if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the name
field
blank when I try to save the file in final form, ready for enduser use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Ok,

Let's try this. Be careful of wrap-around. With this code, you can close
the sheet leaving E59 blank by typing a key word. In this case, the key
word is "Admin". Of course you can change that.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)

Do While IsEmpty(Sheets("Main").Range("E59").Value)
Range("E59").Value = InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")

If Range("E59").Value = "Admin" _
Then
Range("E59").ClearContents
Exit Sub
Else
End If
Loop

End Sub

--

"Patrick Riley" wrote in message
...
Paul:

The Input-Box code worked like a charm, with one blip: When I click
"Cancel"
in the Input Box, the Input Box closes (which is expected, and OK), but
then
a Save-File window opens, allowing me to save the file without filling in
the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in
message
...
Thanks to some generous help from users of this site, I, with no
Visual
Basic
knowledge, am using some VB code that requires the user to type
his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the
name
field
blank when I try to save the file in final form, ready for enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

In VB Editor, I widened the right-hand code pane so that the code did not
wrap, that it had exactly the same line arrangement that I received. I chose
to keep "Admin" (with one cap and four lower-case) as the key word.
I made sure that cell E59 was empty. When I ran the macro, I got an error:

Run Time error '1004'
Cannot change part of a merged cell

The result was: cell E59 contained "Admin" (that is, E59 did not get emptied
out).
Cell E59 is a merger of cells that, during the development of the file, were
originally cells E59 thru O59 inclusive. Can't understand why Excel is upset
with a merged cell.
---Pat

"PCLIVE" wrote:

Ok,

Let's try this. Be careful of wrap-around. With this code, you can close
the sheet leaving E59 blank by typing a key word. In this case, the key
word is "Admin". Of course you can change that.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)

Do While IsEmpty(Sheets("Main").Range("E59").Value)
Range("E59").Value = InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")

If Range("E59").Value = "Admin" _
Then
Range("E59").ClearContents
Exit Sub
Else
End If
Loop

End Sub

--

"Patrick Riley" wrote in message
...
Paul:

The Input-Box code worked like a charm, with one blip: When I click
"Cancel"
in the Input Box, the Input Box closes (which is expected, and OK), but
then
a Save-File window opens, allowing me to save the file without filling in
the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in
message
...
Thanks to some generous help from users of this site, I, with no
Visual
Basic
knowledge, am using some VB code that requires the user to type
his/her
name
into a given cell before the file can be saved, since the name must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the
name
field
blank when I try to save the file in final form, ready for enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Ok. Just expand the range in the line that has ClearContents.

Range("E59:O59").ClearContents

That should do it.


--

"Patrick Riley" wrote in message
...
In VB Editor, I widened the right-hand code pane so that the code did not
wrap, that it had exactly the same line arrangement that I received. I
chose
to keep "Admin" (with one cap and four lower-case) as the key word.
I made sure that cell E59 was empty. When I ran the macro, I got an
error:

Run Time error '1004'
Cannot change part of a merged cell

The result was: cell E59 contained "Admin" (that is, E59 did not get
emptied
out).
Cell E59 is a merger of cells that, during the development of the file,
were
originally cells E59 thru O59 inclusive. Can't understand why Excel is
upset
with a merged cell.
---Pat

"PCLIVE" wrote:

Ok,

Let's try this. Be careful of wrap-around. With this code, you can
close
the sheet leaving E59 blank by typing a key word. In this case, the key
word is "Admin". Of course you can change that.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)

Do While IsEmpty(Sheets("Main").Range("E59").Value)
Range("E59").Value = InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")

If Range("E59").Value = "Admin" _
Then
Range("E59").ClearContents
Exit Sub
Else
End If
Loop

End Sub

--

"Patrick Riley" wrote in message
...
Paul:

The Input-Box code worked like a charm, with one blip: When I click
"Cancel"
in the Input Box, the Input Box closes (which is expected, and OK), but
then
a Save-File window opens, allowing me to save the file without filling
in
the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make
sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in
message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting
your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in
message
...
Thanks to some generous help from users of this site, I, with no
Visual
Basic
knowledge, am using some VB code that requires the user to type
his/her
name
into a given cell before the file can be saved, since the name
must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the
name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the
name
field
blank when I try to save the file in final form, ready for
enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Paul:

YES! It worked!!
Thanks so much for your patience throughout the 5 responses that you gave
me. You were generous with your time, and I learned a lot.
---Pat
--------------------
"PCLIVE" wrote:

Ok. Just expand the range in the line that has ClearContents.

Range("E59:O59").ClearContents

That should do it.


--

"Patrick Riley" wrote in message
...
In VB Editor, I widened the right-hand code pane so that the code did not
wrap, that it had exactly the same line arrangement that I received. I
chose
to keep "Admin" (with one cap and four lower-case) as the key word.
I made sure that cell E59 was empty. When I ran the macro, I got an
error:

Run Time error '1004'
Cannot change part of a merged cell

The result was: cell E59 contained "Admin" (that is, E59 did not get
emptied
out).
Cell E59 is a merger of cells that, during the development of the file,
were
originally cells E59 thru O59 inclusive. Can't understand why Excel is
upset
with a merged cell.
---Pat

"PCLIVE" wrote:

Ok,

Let's try this. Be careful of wrap-around. With this code, you can
close
the sheet leaving E59 blank by typing a key word. In this case, the key
word is "Admin". Of course you can change that.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)

Do While IsEmpty(Sheets("Main").Range("E59").Value)
Range("E59").Value = InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")

If Range("E59").Value = "Admin" _
Then
Range("E59").ClearContents
Exit Sub
Else
End If
Loop

End Sub

--

"Patrick Riley" wrote in message
...
Paul:

The Input-Box code worked like a charm, with one blip: When I click
"Cancel"
in the Input Box, the Input Box closes (which is expected, and OK), but
then
a Save-File window opens, allowing me to save the file without filling
in
the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make
sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in
message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting
your
code,
nothing happened:
I could save file with name-field blank. I did not see an input-box
appear.
I saved file and re-opened, and got the same results: no input box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote in
message
...
Thanks to some generous help from users of this site, I, with no
Visual
Basic
knowledge, am using some VB code that requires the user to type
his/her
name
into a given cell before the file can be saved, since the name
must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the
name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving the
name
field
blank when I try to save the file in final form, ready for
enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

No Problem.
Thanks for the feedback.

Paul

--

"Patrick Riley" wrote in message
...
Paul:

YES! It worked!!
Thanks so much for your patience throughout the 5 responses that you gave
me. You were generous with your time, and I learned a lot.
---Pat
--------------------
"PCLIVE" wrote:

Ok. Just expand the range in the line that has ClearContents.

Range("E59:O59").ClearContents

That should do it.


--

"Patrick Riley" wrote in message
...
In VB Editor, I widened the right-hand code pane so that the code did
not
wrap, that it had exactly the same line arrangement that I received. I
chose
to keep "Admin" (with one cap and four lower-case) as the key word.
I made sure that cell E59 was empty. When I ran the macro, I got an
error:

Run Time error '1004'
Cannot change part of a merged cell

The result was: cell E59 contained "Admin" (that is, E59 did not get
emptied
out).
Cell E59 is a merger of cells that, during the development of the file,
were
originally cells E59 thru O59 inclusive. Can't understand why Excel is
upset
with a merged cell.
---Pat

"PCLIVE" wrote:

Ok,

Let's try this. Be careful of wrap-around. With this code, you can
close
the sheet leaving E59 blank by typing a key word. In this case, the
key
word is "Admin". Of course you can change that.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)

Do While IsEmpty(Sheets("Main").Range("E59").Value)
Range("E59").Value = InputBox("You must type in your name before " & _
"this file can be saved.", "Enter Name.")

If Range("E59").Value = "Admin" _
Then
Range("E59").ClearContents
Exit Sub
Else
End If
Loop

End Sub

--

"Patrick Riley" wrote in
message
...
Paul:

The Input-Box code worked like a charm, with one blip: When I click
"Cancel"
in the Input Box, the Input Box closes (which is expected, and OK),
but
then
a Save-File window opens, allowing me to save the file without
filling
in
the
name field. (I made sure that the name field truly was blank.)
Does this phenomenon occur when you run the code?

---Pat

"PCLIVE" wrote:

Just to be sure, you are using:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If
End Sub

Are you sure E59 is currently empty. The code works when I attempt
saving.
But if there is a space or anything else in E59, no input box is
displayed.
Also, I saw in another post where you were to disable events. Make
sure
they are not currently disabled.

Regards.

--

"Patrick Riley" wrote in
message
...
Paul:

Thanks for taking the time to respond.
I deleted existing VB code, and used your code. After inserting
your
code,
nothing happened:
I could save file with name-field blank. I did not see an
input-box
appear.
I saved file and re-opened, and got the same results: no input
box,
could
still save file with name-field blank.

"PCLIVE" wrote:

Why not just have an input box that will populate the cell?

If IsEmpty(Sheets("Main").Range("E59").Value) _
Then
Range("E59").Value = InputBox("You must type in your
name
before
" &
_
"this file can be saved.", "Enter Name.")
Else
End If


HTH,
Paul

--

"Patrick Riley" wrote
in
message
...
Thanks to some generous help from users of this site, I, with
no
Visual
Basic
knowledge, am using some VB code that requires the user to
type
his/her
name
into a given cell before the file can be saved, since the name
must
appear
on
the printed version. The user-name field is intentionally left
blank.
Upon
attempting to save, the code presents a message to type in the
name,
if
the
name-field is still blank.
Well, CATCH-22. This very code is preventing me from leaving
the
name
field
blank when I try to save the file in final form, ready for
enduser
use.
The code I am using is:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, _
Cancel As Boolean)
If IsEmpty(Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
End Sub

Any suggestions?
---Pat Riley

Dave,
Your are a the MASTER! Thank you. I have been pulling my hair out for the last 6 hours because no one on here really either understood the initial question or just had no clue.
The bottom line was, the code needed to be saved and that could not be done because the code was running.
Thank you for providing the "immediate window" and "application.enableevents = false" command thus allowing me to save the file blank.
Jason



Dave Peterson wrote:

CATCH-22 won't let me save the file
26-Mar-08

Before you (as the developer, not the user) save the file, you can turn off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if



Patrick Riley wrote:

--

Dave Peterson

EggHeadCafe - Software Developer Portal of Choice
ASP.NET Session State FAQs
http://www.eggheadcafe.com/tutorials...state-faq.aspx

And google is nice, too!!

Jason, Frederick wrote:

Dave,
Your are a the MASTER! Thank you. I have been pulling my hair out for the last 6 hours because no one on here really either understood the initial question or just had no clue.
The bottom line was, the code needed to be saved and that could not be done because the code was running.
Thank you for providing the "immediate window" and "application.enableevents = false" command thus allowing me to save the file blank.
Jason

Dave Peterson wrote:

CATCH-22 won't let me save the file
26-Mar-08

Before you (as the developer, not the user) save the file, you can turn off
events.

Open the VBE
hit ctrl-g to see the immediate window
type this and hit enter:
application.enableevents = false

Then save your workbook--the _beforesave event won't fire.

Then back to the VBE and toggle the setting in the immediate window:
application.enableevents = true

====
You could also do other stuff, too. Maybe check the username?

if lcase(application.username) = lcase("Patrick Riley") then
'do nothing, let it save...
'or clear that cell!
me.sheets("Main").range("e59").value = ""
else
If IsEmpty(me.Sheets("Main").Range("E59").Value) Then
MsgBox "You must type in your name before " & _
"this file can be saved.", 16, "ERROR"
Cancel = True
End If
end if

Patrick Riley wrote:

--

Dave Peterson

EggHeadCafe - Software Developer Portal of Choice
ASP.NET Session State FAQs
http://www.eggheadcafe.com/tutorials...state-faq.aspx

--

Dave Peterson