http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd

Hi Todd

Do you read this?

http://www.rondebruin.nl/cdo.htm#Problems

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine" wrote in message ...
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd

Afer reading again

Do you use Windows 2000 or Windows XP Todd???

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Ron de Bruin" wrote in message ...
Hi Todd

Do you read this?

http://www.rondebruin.nl/cdo.htm#Problems

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine" wrote in message ...
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd

I use windows 2000 here at work. I will be using 2000 for
the majority anyway.

I read the Problems section and I still cant figure out
what my problem is because I keep getting the debug
error. And when I click debug this is whats
highlighted. Set iMsg = CreateObject("CDO.Message").

The code I used this time was...
Private Sub CommandButton1_Click()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub
Dim iMsg As Object
Dim iConf As Object
Dim Flds As Variant
Dim WB As Workbook
Dim WBname As String
Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed use
'Set WB = ThisWorkbook
WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"
WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp
Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
iConf.Load -1 ' CDO Source Defaults
Set Flds = iConf.Fields
With Flds
.Item
("http://schemas.microsoft.com/cdo/configuration/sendusing"
) = 2
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
") = "smtp.something.nl"
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
port") = 25
.Update
End With
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
' You can add any file you want with
'.AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True


End Sub





-----Original Message-----
Afer reading again

Do you use Windows 2000 or Windows XP Todd???

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Ron de Bruin" wrote in message
...
Hi Todd

Do you read this?

http://www.rondebruin.nl/cdo.htm#Problems

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine"
wrote in message
...
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I
kept
getting the same error on each code I tried to use.
see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code
is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-
mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a
Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd




.

= "smtp.something.nl"

Did you change the server to yours in the code when you test it

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine" wrote in message ...
I use windows 2000 here at work. I will be using 2000 for
the majority anyway.

I read the Problems section and I still cant figure out
what my problem is because I keep getting the debug
error. And when I click debug this is whats
highlighted. Set iMsg = CreateObject("CDO.Message").

The code I used this time was...
Private Sub CommandButton1_Click()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub
Dim iMsg As Object
Dim iConf As Object
Dim Flds As Variant
Dim WB As Workbook
Dim WBname As String
Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed use
'Set WB = ThisWorkbook
WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"
WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp
Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
iConf.Load -1 ' CDO Source Defaults
Set Flds = iConf.Fields
With Flds
.Item
("http://schemas.microsoft.com/cdo/configuration/sendusing"
) = 2
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
") = "smtp.something.nl"
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
port") = 25
.Update
End With
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
' You can add any file you want with
'.AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True


End Sub





-----Original Message-----
Afer reading again

Do you use Windows 2000 or Windows XP Todd???

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Ron de Bruin" wrote in message
...
Hi Todd

Do you read this?

http://www.rondebruin.nl/cdo.htm#Problems

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine"
wrote in message
...
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I
kept
getting the same error on each code I tried to use.
see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code
is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-
mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a
Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd




.

yes I believe I did it correctly. Here are the lines
fromt hat part of the code:

.Item
("http://schemas.microsoft.com/cdo/configuration/sendusing"
) = 2
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
") = "SCGVLEXMB03"
.Item
("http://schemas.microsoft.com/cdo/configuration/smtpserver
port") = 25


-----Original Message-----
= "smtp.something.nl"

Did you change the server to yours in the code when you
test it

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine"
wrote in message news:059701c3ac91$0cac4e00
...
I use windows 2000 here at work. I will be using 2000
for
the majority anyway.

I read the Problems section and I still cant figure out
what my problem is because I keep getting the debug
error. And when I click debug this is whats
highlighted. Set iMsg = CreateObject
("CDO.Message").

The code I used this time was...
Private Sub CommandButton1_Click()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub
Dim iMsg As Object
Dim iConf As Object
Dim Flds As Variant
Dim WB As Workbook
Dim WBname As String
Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed use
'Set WB = ThisWorkbook
WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"
WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp
Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
iConf.Load -1 ' CDO Source Defaults
Set Flds = iConf.Fields
With Flds
.Item

("http://schemas.microsoft.com/cdo/configuration/sendusing"
) = 2
.Item

("http://schemas.microsoft.com/cdo/configuration/smtpserver
") = "smtp.something.nl"
.Item

("http://schemas.microsoft.com/cdo/configuration/smtpserver
port") = 25
.Update
End With
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
' You can add any file you want with
'.AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True


End Sub





-----Original Message-----
Afer reading again

Do you use Windows 2000 or Windows XP Todd???

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Ron de Bruin" wrote in
message
...
Hi Todd

Do you read this?

http://www.rondebruin.nl/cdo.htm#Problems

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Todd Huttenstine"
wrote in message
...
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes.
I
kept
getting the same error on each code I tried to use.
see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code
is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set
a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the
code
is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy
h-
mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a
Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete
the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd




.



.

You need to be on W2000 and you need valid email
addresses and an smtp which recognises your email. It
does work


-----Original Message-----
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I
kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd
.

Todd,

That sounds like a CDO installation/configuration error. Here's a link that
may help (watch line wrap):

http://groups.google.com/groups?hl=e...3DN%26tab%3Dwg

--
Regards,

Jake Marx
MS MVP - Excel
www.longhead.com

[please keep replies in the newsgroup - email address unmonitored]


Todd Huttenstine wrote:
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd

Hi Jake

This looks like the problem.
I hope we hear from Todd

--
Regards Ron de Bruin
(Win XP Pro SP-1 XL2002 SP-2)
www.rondebruin.nl



"Jake Marx" wrote in message ...
Todd,

That sounds like a CDO installation/configuration error. Here's a link that
may help (watch line wrap):


http://groups.google.com/groups?hl=e...3DN%26tab%3Dwg

--
Regards,

Jake Marx
MS MVP - Excel
www.longhead.com

[please keep replies in the newsgroup - email address unmonitored]


Todd Huttenstine wrote:
http://www.rondebruin.nl/cdo.htm#sheet

I went to the above site and tried various codes. I kept
getting the same error on each code I tried to use. see
error below....

"Run-Time error '-2147024770(8007007e)':
Automation error
The specified module could not be found."

When I click debug, the following part of the code is
highlighted.

" Set iMsg = CreateObject("CDO.Message")"

Here is the entire code below.

Sub CDO_Send_Workbook()
' This sub use late binding, you don't have to set a
reference
' It is not working in Windows 98 and ME.
' You must be online when you run the sub

Dim iMsg As Object
Dim iConf As Object
Dim WB As Workbook
Dim WBname As String

Application.ScreenUpdating = False
Set WB = ActiveWorkbook
'If you want to mail the workbook where the code is
placed you must use
'Set WB = ThisWorkbook

WBname = WB.Name & " " & Format(Now, "dd-mm-yy h-mm-
ss") & ".xls"

WB.SaveCopyAs "C:/" & WBname
' It will save a copy of the file in C:/ with a Date
and Time stamp

Set iMsg = CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")
With iMsg
Set .Configuration = iConf
.To = "
.From = """Ron"" "
.Subject = "This is a test"
.TextBody = "Hi there"
.AddAttachment "C:/" & WBname
'.AddAttachment "C:/Test.txt"
' You can add any file you want
with .AddAttachment "C:/Test.txt"
.Send
End With
Kill "C:/" & WBname 'If you not want to delete the
file you send delete this line
Set iMsg = Nothing
Set iConf = Nothing
Set WB = Nothing
Application.ScreenUpdating = True
End Sub


Any ideas?

Thanx
Todd