I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

What happens if you just (temporarily) dump that sheet.xlt template and put a
brand new one out there?

If it works ok, then how about trying to recreate it once more?

mac@bath wrote:

I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

--

Dave Peterson

Thanks Dave, I'll certainly try that.
But now, "Sxx's Law"...?

I've just transferred - temporarily - to a new workstation in my office (see
below). Profile has followed me, but, because all of my
shortcuts/links/macros decided to go walkabout. I actually created a new BOOK
and a new SHEET

Both work absolutely flawlessley!!!!
Two thoughts (and I will report back when I get back to my original
W-Station...

Firstly, I had a small (26k) jpeg corporate logo in both my BOOK and SHEET
(the ones that had the problems).
I have NOT put the logo's into my newly created ones.
Wonder if the graphics link caused the fault??

Secondly. My original machine was a Dell (720G ?) and I understand that the
departmental IT guys identified a diagnostic problem on my mother-board ('B'
light going orange on failed boot?) and Dell are now replacing the whole
shebang.
Wonder if THAT was my problem?

I will report back later, in case my experiences help others.
Meantime..."Thanks"

--
mac


"Dave Peterson" wrote:

What happens if you just (temporarily) dump that sheet.xlt template and put a
brand new one out there?

If it works ok, then how about trying to recreate it once more?

mac@bath wrote:

I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

--

Dave Peterson

I wouldn't guess it was the small jpg, but who knows????

And hardware problems??? I got nothing for that either <bg.

mac@bath wrote:

Thanks Dave, I'll certainly try that.
But now, "Sxx's Law"...?

I've just transferred - temporarily - to a new workstation in my office (see
below). Profile has followed me, but, because all of my
shortcuts/links/macros decided to go walkabout. I actually created a new BOOK
and a new SHEET

Both work absolutely flawlessley!!!!
Two thoughts (and I will report back when I get back to my original
W-Station...

Firstly, I had a small (26k) jpeg corporate logo in both my BOOK and SHEET
(the ones that had the problems).
I have NOT put the logo's into my newly created ones.
Wonder if the graphics link caused the fault??

Secondly. My original machine was a Dell (720G ?) and I understand that the
departmental IT guys identified a diagnostic problem on my mother-board ('B'
light going orange on failed boot?) and Dell are now replacing the whole
shebang.
Wonder if THAT was my problem?

I will report back later, in case my experiences help others.
Meantime..."Thanks"

--
mac

"Dave Peterson" wrote:

What happens if you just (temporarily) dump that sheet.xlt template and put a
brand new one out there?

If it works ok, then how about trying to recreate it once more?

mac@bath wrote:

I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

--

Dave Peterson


--

Dave Peterson

Reporting back on findings...

Firstly I deleted the original "Sheet.xlt" that I had created as suggested
Then I created a new one (but with same formating as my personal 3-tab
"Book.xlt")
The whole programme fell over again!!

I thought that I had identified a reason when it appeared that I had two
sheet.xlt's - one in the programme folder and one in my user profile folder
(using NT200 with OffPro-XP). One was set to portrait, the other to
landscape. However having deleted both BEFORE making my new one, it still
fell over, so unlikely to have been the reason.

I then created a new "Sheet.xlt" - but this time WITHOUT the small graphic
in the footer.
Works perfectly.

Now the strange bit...

In page preview of any workbook created with my book.xlt template, I get the
graphic in the footer.
In the page preview of the sheet.xlt I also get a perfect graphic in the
footer.
BUT
When I insert a new sheet INTO an open workbook and then group/preview it, I
get graphics on the three original tabs, but no graphics on the added
sheet(s)_(even though it clearly has the graphic on the sheet.xlt).

But it is when I try to SAVE the workbook (with the new/added sheets) that
up pops the "Sorry I'm closing & telling Uncle Bill about you!!" message.

Ther seems to be NO logic to this strange anomally.

I've got round it by just deleting the graphic from the sheet.xlt.
(O.K. it means I gave up!)

Everything now works fine, but I just have to remember to group all tabs and
THEN set page formating if I want to incoproate the company logo on ALL
sheets.
Frustrating, but I can live with it - until/unless someone can replicate and
suggest a cure for my problem.

Any thoughts out there?
--
mac


"mac@bath" wrote:

I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

I don't have any insights on why this happens for you.

But maybe you could record a macro when you add the graphic. Then just rerun
the macro when you need to add the logo to other sheets. Might make it a bit
simpler.

mac@bath wrote:

Reporting back on findings...

Firstly I deleted the original "Sheet.xlt" that I had created as suggested
Then I created a new one (but with same formating as my personal 3-tab
"Book.xlt")
The whole programme fell over again!!

I thought that I had identified a reason when it appeared that I had two
sheet.xlt's - one in the programme folder and one in my user profile folder
(using NT200 with OffPro-XP). One was set to portrait, the other to
landscape. However having deleted both BEFORE making my new one, it still
fell over, so unlikely to have been the reason.

I then created a new "Sheet.xlt" - but this time WITHOUT the small graphic
in the footer.
Works perfectly.

Now the strange bit...

In page preview of any workbook created with my book.xlt template, I get the
graphic in the footer.
In the page preview of the sheet.xlt I also get a perfect graphic in the
footer.
BUT
When I insert a new sheet INTO an open workbook and then group/preview it, I
get graphics on the three original tabs, but no graphics on the added
sheet(s)_(even though it clearly has the graphic on the sheet.xlt).

But it is when I try to SAVE the workbook (with the new/added sheets) that
up pops the "Sorry I'm closing & telling Uncle Bill about you!!" message.

Ther seems to be NO logic to this strange anomally.

I've got round it by just deleting the graphic from the sheet.xlt.
(O.K. it means I gave up!)

Everything now works fine, but I just have to remember to group all tabs and
THEN set page formating if I want to incoproate the company logo on ALL
sheets.
Frustrating, but I can live with it - until/unless someone can replicate and
suggest a cure for my problem.

Any thoughts out there?
--
mac

"mac@bath" wrote:

I have created a BOOK.xlt template (fairly basic- 3-tabs/verdana10pt/blue
font/A4~l-s formatting).
I then opened that book.xlt, deleted two tabs and re-saved as SHEET.xlt.
Both are in the correct XL/XLStart folder in my C:/User folder. (together
with my PERSONAL.xls)
So far, so good....BUT
Although every time I open Excel, my new template works a treat, if/when I
then ADD (insert) a new/fourth sheet to that workbook I get a "Sorry, Excel
has encountered an errror, needs to close and can we send an error report to
Uncle Bill?" message.
If I let it save the work and reopen, that same error message reappears
immediately in the "repaired" version, so it goes back through the
"sorry...tell Uncle" process" !!!.
I end up closing excel. And climbing the wall in frustration!!!

What am I doing wrong?? ANY ideas or suggestions would be most welcome.
TIA
--
mac

--

Dave Peterson