Precise Printing
 

Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then print
it and measure the width with digital calipers, the actual width is 10.27 mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa

Precise Printing
 

Actually I made a mistake... that should be 10.87 not 10.27.

That's nearly a whole centimeter out!!

Lisa


"LIsa" wrote:

Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then print
it and measure the width with digital calipers, the actual width is 10.27 mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa

Precise Printing
 

With a CAD program?
--
Bernard V Liengme
Microsoft Excel MVP
www.stfx.ca/people/bliengme
remove caps from email

"LIsa" wrote in message
...
Actually I made a mistake... that should be 10.87 not 10.27.

That's nearly a whole centimeter out!!

Lisa


"LIsa" wrote:

Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then
print
it and measure the width with digital calipers, the actual width is 10.27
mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm
width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa

Precise Printing
 

Somewhere in all the stuff I have read about Excel, I seem to remember that
it is not a precision measurement system. It is a number crunching
spreadsheet with some additional capabilities and features, one of which is
not CAD/CAM. For precision printing you will require special software with
matching hardware. The printer itself must be calibrated to the CPU
interface. Even if you had been lucky enough to get a precise measurement
using they standard Excel software and local printer, the very first time you
try to use it anywhere else would be a failure.

"LIsa" wrote:

Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then print
it and measure the width with digital calipers, the actual width is 10.27 mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa

Precise Printing
 

I've tried to print precisely with Excel, and it can't be done. You can get
pretty close with a specific version of Excel and a specific printer. But as
soon as you change either one, the precision is lost.

You need a CAD program.

--
Regards,
Fred


"LIsa" wrote in message
...
Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then print
it and measure the width with digital calipers, the actual width is 10.27 mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa

Precise Printing
 

You will have to do the compensation yourself based on your observed
printed output.

LIsa wrote:

Hi,

If I create a rectangle shape with a width of 10 * 72 / 25.4 and then print
it and measure the width with digital calipers, the actual width is 10.27 mm
not 10 mm.

Can anyone tell me why please and how to print a rectangle of 10 mm width?

I actually want to get the precision down to under 1/2 mm.

TIA
Lisa