Add the following after the For dFileCount = 0 line

For dFileCount = 0 To UBound(arrFiles)
' Application.ScreenUpdating = true
' Debug.Print Err.Number; Err.Description
' Debug.Print "dFileCount ", dFileCount
' Debug.Print "UBound(arrFiles) ", UBound(arrFiles)
' If dFileCount <= (arrFUBoundiles) Then
' Debug.Print (arrFUBoundiles)
' End If
' Exit Sub

When the code breaks:
- press ctrl-g to open the Immediate (debug) Window
- remove the comments
- drag the yellow cursor down to the first newly uncommented line
- press F8 repeatedly to Step through the code

Are the dubg comments consistent with what you expect, any error messages
while stepping through.

Regards,
Peter T

"Dean" wrote in message
...
Well, this is where it gets even messier. The author kept revising the
maco
to try to make the problems go away, with no success. What I sent you was
his latest version. In this last version, there is no error message - it
just stops prematurely at the spot where there used to be a file that was
deleted or renamed. I think this is not materially different from the
original file, as far as the failure modes. It was also just stopping
without finishing, later on, aftre i deleted the renamed file. But, in
terms of the original macro, when it first bombed out, after I renamed the
file but before I chose to delete the renamed file, it said it could not
find the file I had deleted, and when I hit debug, the yellow backgorund
hihglight was at what is now:

For dFileCount = 0 To UBound(arrFiles)

If you can stomach to read on, here is the exact subroutine, as it was
then.
The actual line hihglighted is the very first line: For d = 0 To
UBound(arrFiles).

Public Sub ImportFiles()
For d = 0 To UBound(arrFiles)
Application.ScreenUpdating = False
If arrFiles(d) < Empty Then
GetTheDate (arrFiles(d))
Workbooks.Open (arrFiles(d))
Application.StatusBar = "Processing file " & d + 1 & ": " &
arrFiles(d)
sDF = ActiveWorkbook.Name
For s = 1 To ActiveWorkbook.Sheets.Count
Sheets(s).Select
sSheet = ActiveSheet.Name
If sSheet = "lcg" Or sSheet = "LCG" Or _
sSheet = "lcv" Or sSheet = "LCV" Or _
sSheet = "mcg" Or sSheet = "MCG" Or _
sSheet = "mcv" Or sSheet = "MCV" Or _
sSheet = "scg" Or sSheet = "SCG" Or _
sSheet = "scv" Or sSheet = "SCV" Then
Cells.Select
Selection.MergeCells = False
Range("A4").Select

dRowCount = ActiveSheet.UsedRange.Rows.Count
Range("A4:A" & dRowCount).Select
Selection.Copy
Workbooks(sOT).Activate
Sheets(sSheet).Select
If Range("E4").Value = Empty Then
Range("E4").Select
End If
dStart = ActiveCell.Row
Selection.PasteSpecial Paste:=xlPasteValues
ActiveCell.Offset(0, -2).Select
Workbooks(sDF).Activate
Range("A4").Select
Range("C4:C" & dRowCount & ",D4:D" & dRowCount).Select
Selection.Copy
Workbooks(sOT).Activate
Selection.PasteSpecial Paste:=xlPasteValues
Selection.End(xlDown).Offset(1, 2).Select
Range("A" & dStart & ":A" & ActiveCell.Offset(-1,
0).Row).Value = sDate
Workbooks(sDF).Activate
End If
Next
Application.DisplayAlerts = False
Workbooks(sDF).Close
Application.DisplayAlerts = True
Application.ScreenUpdating = True
End If
Next
Application.StatusBar = False
End Sub

Thnaks!
Dean

"Peter T" <peter_t@discussions wrote in message
...
At a quick glance of the code there are various scenarios that might
error.

Which line does the code stop on, if necessary press Ctrl-Break when you
get
the get the error message.

Regards,
Peter T

"Dean" wrote in message
...
Peter T has requested the code for the macros in my problematic
template,
to
help figure out why one computer has a problem with it. Keep in mind
that
it only doesn't work on one machine. The output file macro bascially
looks
for all the files in the same folder as it, counts the files (I think),
and
extracts the date from the input filenames (usually somehting like "all
portfolio data - 05-31-06.xls") and also copies and pastes some data
from
them into the output template from whihc the macro is called.

Right now, the macro always stops at file #19, even though there are
usually
21 and 22 input files in my small test sample. No error message, it
just
stops prior to processing the last couple of files, plus some final
overhead, and apparently quits. Originally, the 19th file was a file
that
turned out to have a weird filename that the macro could not extract
the
date from. So I renamed it into a format that was simialr to the other
fiels that were accepted. When I did this and reran the macro, it
crashed,
saying it couldn't find a file with the old filename, the one it didn't
like, the one that I renamed. To be safe, I copied in a fresh version
of
the output template file into the same folder and tried again. But
the
error message was the same. So, I chose to simply delete the (renamed)
input file that had been giving me the problem. As I said, now, each
time
I
attempt to run it on my one best computer, it simply stops prematurely.
Other, lesser, computers don't seem to have this problem. I tried
putting
it all in a new folder - nothing helped.

Since I always run with a fresh copy of the template, I cannot fathom
how
it
can seemingly remember that some old filename, or old file, is now not
included. It's supposed to find what files are in the same folder when
you
run the macro. I'ts not supposed to already know what they might be!

Thanks! Here is all the macro, done by someone skilled, someone who is
now
perplexed. It runs fine on his machine, as it does on my other
machines,
just not on my main computer. No macro buttons or toolbars are
involved.

Option Explicit

Public sPath As String, sAppName As String, sFileName As String, sData
As
String
Public sSheet As String, sDate As String
Public sShares As String, sPrice As String, sTicker As String
Public FS
Public arrFiles, arrData
Public dFileCount As Double, dRowCount As Double, dSheets As Double
Public dPF As Double

Public Sub ImportFiles()
GetFileList
ProcessFiles
PopulateTemplate
SortByDate
End Sub

Public Sub GetFileList()
sPath = ActiveWorkbook.Path & "\"
sAppName = ActiveWorkbook.Name
If IsDim(arrFiles) = True Then arrFiles = Empty
If IsDim(arrData) = True Then arrData = Empty

Set FS = Application.FileSearch
With FS
.NewSearch
.LookIn = sPath
.SearchSubFolders = True
.Filename = "*.xls"
.FileType = msoFileTypeExcelWorkbooks
If .Execute 0 Then
ReDim arrFiles(0)
For dFileCount = 1 To .FoundFiles.Count
GetFileName (.FoundFiles(dFileCount))
If sFileName < ActiveWorkbook.Name Then
arrFiles(dFileCount - 1) = .FoundFiles(dFileCount)
ReDim Preserve arrFiles(UBound(arrFiles) + 1)
End If
Next
Else
MsgBox "No files found in " & sPath & " or its
sub-folders."
End
End If
End With
If IsEmpty(arrFiles(UBound(arrFiles))) = True Then
ReDim Preserve arrFiles(UBound(arrFiles) - 1)
End If
End Sub

Public Sub ProcessFiles()
Application.ScreenUpdating = False
For dFileCount = 0 To UBound(arrFiles)
Workbooks.Open (arrFiles(dFileCount))
GetFileName (arrFiles(dFileCount))
GetFileDate
Application.StatusBar = "Processing file " & dFileCount & " : "
&
sFileName

For dSheets = 1 To Workbooks(sFileName).Sheets.Count
Sheets(dSheets).Select
If CheckSheetName = True Then
dRowCount = ActiveSheet.UsedRange.Rows.Count
Range("A4").Select
For dPF = 0 To dRowCount - 3
If ActiveCell.Offset(dPF, 0).Value < Empty And
IsNumeric(ActiveCell.Offset(dPF, 0).Value) = False Then
If dPF = 0 And IsDim(arrData) = False Then
ReDim arrData(0)
Else
ReDim Preserve arrData(UBound(arrData) + 1)
End If
sData = UCase(sSheet) & ";" & sDate & ";" & _
ActiveCell.Offset(dPF, 0).Value & ";" & _
ActiveCell.Offset(dPF, 2).Value & ";" & _
ActiveCell.Offset(dPF, 3).Value
arrData(UBound(arrData)) = sData
End If
Next
End If
If IsDim(arrData) = True Then
If IsEmpty(arrData(UBound(arrData))) = True Then
ReDim Preserve arrData(UBound(arrData) - 1)
End If
End If
Next
Application.DisplayAlerts = False
Workbooks(sFileName).Close
Application.DisplayAlerts = True
Next
Application.StatusBar = False
Application.ScreenUpdating = True
End Sub

Public Sub PopulateTemplate()
Application.ScreenUpdating = False
For dPF = 0 To UBound(arrData)
Application.StatusBar = "Populating template. Please wait... "
&
dPF & " of " & UBound(arrData)
SplitVariables (arrData(dPF))
Sheets(sSheet).Select
Range("A4").Select
If ActiveCell.Value < "" Then
If ActiveCell.Offset(1, 0).Value = "" Then
ActiveCell.Offset(1, 0).Select
Else
Selection.End(xlDown).Offset(1, 0).Select
End If
End If
ActiveCell.Value = sDate
ActiveCell.Offset(0, 2).Value = sShares
ActiveCell.Offset(0, 3).Value = sPrice
ActiveCell.Offset(0, 4).Value = sTicker
Next
arrData = Empty
Application.StatusBar = False
Application.ScreenUpdating = True
End Sub

Public Sub GetFileName(TheFile As String)
sFileName = Strings.Replace(TheFile, sPath, "")
Do Until InStr(1, sFileName, "\") = 0
sFileName = Mid(sFileName, InStr(1, sFileName, "\") + 1,
Len(sFileName))
Loop
End Sub

Public Sub GetFileDate()
sDate = Strings.Replace(sFileName, ".xls", "")
sDate = Right(sDate, 10)
Do Until IsNumeric(Mid(sDate, 1, 1)) = True
sDate = Trim(Mid(sDate, 2, Len(sDate)))
Loop
If InStr(1, sDate, "-") = 0 And Len(sDate) = 6 Then
sDate = Mid(sDate, 1, 2) & "-" & Mid(sDate, 3, 2) & "-" &
Mid(sDate,
5, 2)
End If
sDate = Format(sDate, "M/d/yyyy")
If IsDate(sDate) = False Then
MsgBox "The following file does not appear to have a valid date
in
the filename:" & vbNewLine & vbNewLine & _
sFileName & vbNewLine & vbNewLine & "Resetting this file.",
vbCritical, "Invalid Date"
ResetWorkbook
End
End If
End Sub

Public Sub SortByDate()
Application.ScreenUpdating = False
For dSheets = 1 To ActiveWorkbook.Sheets.Count
Sheets(dSheets).Select
sSheet = ActiveSheet.Name
If CheckSheetName = True Then
GetRowCount
Range("A4:E" & dRowCount).Select
Selection.Sort Key1:=Range("A4"),
Order1:=xlDescending,
Key2:=Range("E4") _
, Order2:=xlAscending, Header:=xlNo
Range("A4").Select
Range("B4").Formula = "=vlookup(E4,LOOKUP!C:D,2,FALSE)"
Range("B4").AddComment
Range("B4").Comment.Text Text:="Dean:" & Chr(10) & "At
the
end, Dean will copy this down as far as he needs to."
End If
Next
Sheets(1).Select
Application.ScreenUpdating = True
End Sub

Public Sub ResetWorkbook()
Application.ScreenUpdating = False

Sheets("LCG").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("MCG").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("LCV").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("MCV").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("SCG").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("SCV").Select
Range("A4:A65536").EntireRow.Delete shift:=xlUp
Sheets("LCG").Select

Application.ScreenUpdating = True
End Sub

Public Function CheckSheetName() As Boolean
CheckSheetName = False
sSheet = ActiveSheet.Name
If sSheet = "lcg" Or sSheet = "LCG" Or _
sSheet = "lcv" Or sSheet = "LCV" Or _
sSheet = "mcg" Or sSheet = "MCG" Or _
sSheet = "mcv" Or sSheet = "MCV" Or _
sSheet = "scg" Or sSheet = "SCG" Or _
sSheet = "scv" Or sSheet = "SCV" Then
CheckSheetName = True
End If

End Function

Public Function IsDim(arr As Variant) As Boolean
On Error GoTo errNotDim
Dim d As Double
d = UBound(arr)
IsDim = True
Exit Function

errNotDim:
IsDim = False
End Function

Public Sub SplitVariables(TheString)
Dim arrVars(4), dVar As Double
For dVar = 0 To 3
arrVars(dVar) = Mid(TheString, 1, InStr(1, TheString, ";") - 1)
TheString = Mid(TheString, InStr(1, TheString, ";") + 1,
Len(TheString))
Next
arrVars(4) = TheString
sSheet = arrVars(0)
sDate = arrVars(1)
sTicker = arrVars(2)
sShares = arrVars(3)
sPrice = arrVars(4)
End Sub

Public Sub GetRowCount()
Range("A4").Select
If ActiveCell.Value < "" Then
If ActiveCell.Offset(1, 0).Value = "" Then
dRowCount = ActiveCell.Row
Else
Selection.End(xlDown).Select
dRowCount = ActiveCell.Row
End If
End If
Range("A4").Select
End Sub




"Dean" wrote in message
...
I have a template that basically uses a macro to copy and paste from
all
input files that are placed in its same folder and paste that stuff
into
itself. It also extracts the dates from the end of each of the
filenames.
I ran it with a lot of files there and it, basically, worked. I know
that
it does not know the names of the files that will be there, in
advance.

Then, I start over with a fresh template and try to run it again with
many
of the files removed from the folder, and VB gives me an error
message
telling me it can't find some of the removed files. Someone says
it's
some sort of caching, apparently. I don't understand. Is there some
way
to clear EXCEL caches? How would a fresh copy know of files that it,
presumably, has never seen?

Let me know if I need to show you the macro, which was created by
somebody
else. I hope not because it seems that my question is more basic

Thanks!
Dean