HM
If I read this correctly, then the sequence in sheet 1 is
C1 = scheduleC1
C2 = scheduleC2
C3 = scheduleC3
C4 = scheduleD2
C5 = scheduleD3...
If this is correct, then try
Sub ccc()
Dim cnta As Boolean
cnta = True
Range("c1").Select
ActiveCell.Formula = "=schedule!c1"
ActiveCell.Offset(1, 0).Select
While ActiveCell.Row < 26
ccol = Int(ActiveCell.Row / 2 + 2)
ActiveCell.Formula = "=schedule!r" & cnta + 3 & "c" & ccol
cnta = Not (cnta)
ActiveCell.Offset(1, 0).Select
Wend
End Sub
It assumes that you are already in sheet1.
Tony
----- HM wrote: -----
Greetings All,
Thanks alot Dick for the initial help. I thought I had it, but i was unable
to modify this to exactly work for me.
I have the following macro code which retrieves data from a second
worksheet:
Dim i As Long, j As Long
Dim Rng As Range
Dim Sh As Worksheet
Set Sh = ThisWorkbook.Sheets("Schedule")
Set Rng = ThisWorkbook.Sheets("Sheet1").Range("C1")
Rng.Formula = "=Schedule!C1"
For i = 2 To 19 Step 6
For j = 3 To 5
Rng.Offset(i + j - 4, 0).Formula = _
"=Schedule!" & Sh.Cells(i, j).Address(0, 0)
Rng.Offset(i + j - 3, 0).Formula = _
"=Schedule!" & Sh.Cells(i + 1, j).Address(0, 0)
Next j
Next i
End Sub
The above code returns the following locations
points to: retreived from:
(2,0) (2,3)
(3.0) (3,3)
(3,0) (2,4)
(4,0) (3,4)
(4,0) (2,5)
(5,0) (3,5)
(5,0) (8,3)
(6,0) (9,3)....etc..
What I need it to return is the following:
points to: retreived from:
(2,0) (2,3)
(3.0) (3,3)
(4,0) (2,4)
(5,0) (3,4)
(6,0) (2,5)
(7,0) (3,5)
(8,0) (8,3)
(9,0) (9,3)....etc
Hope that makes sense? Is there a simple change I can make to this code?
Thank you,
HM
"Dick Kusleika" wrote in message
...
HM
Try this
Sub PullFromSchedule()
Dim i As Long, j As Long
Dim Rng As Range
Dim Sh As Worksheet
Set Sh = ThisWorkbook.Sheets("Schedule")
Set Rng = ThisWorkbook.Sheets("Sheet1").Range("C1")
Rng.Formula = "=Schedule!C1"
For i = 2 To 121 Step 6
For j = 3 To 5
Rng.Offset(i + j - 4, 0).Formula = _
"=Schedule!" & Sh.Cells(i, j).Address(0, 0)
Rng.Offset(i + j - 1, 0).Formula = _
"=Schedule!" & Sh.Cells(i + 1, j).Address(0, 0)
Next j
Next i
End Sub
--
Dick Kusleika
MVP - Excel
www.dicks-clicks.com
Post all replies to the newsgroup.
"HM" wrote in message
Greetings All,
This is probably very simple and I'm probalby going to over explain it
but
here goes:
I have the following code from a macro I recorded and I'm trying to
find
a
way to simplify. The first line pulls a date field for C1. But after
that
I am hoping to repeat a pattern for C2 to C121 where values are placed
in
Column C as such: I'm retreiving information to paste into worksheet
"Sheet1" from worksheet "Schedule". The information is pulled from
rows
2
& 3 then rows 8 & 9, then 14&15..etc in that pattern (+6) from the
previous
row. And for each set of rows (2,3) for example, it pulls data from 3
adjacent columns (C,D,E). I don's see any D or E in the macro code,
but
it
looks like C3,C4 and C5 represent those 3 columns. Below is the
pasted
macro code:
ActiveCell.FormulaR1C1 = "=Schedule!R1C3" // Pulls date
field
Range("C2").Select
ActiveCell.FormulaR1C1 = "=Schedule!R2C3"
Range("C3").Select
ActiveCell.FormulaR1C1 = "=Schedule!R3C3"
Range("C4").Select
ActiveCell.FormulaR1C1 = "=Schedule!R2C4"
Range("C5").Select
ActiveCell.FormulaR1C1 = "=Schedule!R3C4"
Range("C6").Select
ActiveCell.FormulaR1C1 = "=Schedule!R2C5"
Range("C7").Select
ActiveCell.FormulaR1C1 = "=Schedule!R3C5"
Range("C8").Select
ActiveCell.FormulaR1C1 = "=Schedule!R8C3"
Range("C9").Select
ActiveCell.FormulaR1C1 = "=Schedule!R9C3"
Range("C10").Select
ActiveCell.FormulaR1C1 = "=Schedule!R8C4"
Range("C11").Select
ActiveCell.FormulaR1C1 = "=Schedule!R9C4"
Range("C12").Select
ActiveCell.FormulaR1C1 = "=Schedule!R8C5"
Range("C13").Select
ActiveCell.FormulaR1C1 = "=Schedule!R9C5"
The macro would continue on to finish at C121
Thank you. Any help is greatly appreciated,
HM