|
sumproduct function, Bob P please see tracking sheet help
Tracking sheet help, i'm stuck.
|
sumproduct function, Bob P please see tracking sheet help
I think we need (a lot) more detail than that.
-- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
Example sheet 3 On Time Performance
A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 Im using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicles pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicles pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicles pass is greater than 10 minutes I record this on sheet 3, column C. Im trying to have sheet 3 linked to sheet 2 so when the vehicles pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
0-10,
=SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
Thank you for your reply. I don't know where to make the changes so it works
in my wookbook. confused about the sheet 3 and no sheet 2 in the formula. is there a way I can modify what I have so far. This does very well in placing the count in sheet 3 when I make an entry on sheet 2. But it only counts the entry, not whether the entry is with in 10 minutes, or over 10 minutes. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(NOT(ISBLANK(LTC!$D$3:$D$192)))) sheet 2 is LTC. sheet 3 is OTP. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
So far this works in column B.
=SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10")) And this for column C. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10")) On sheet 3 column B This counts all the left nubers that match from sheet 2, then if the difference is more then 10 minutes it subtracts 1 from that count and places 1 in column C. I like the way it works, but it defeats the purpose of (NOT(ISBLANK(. Is there a way to keep the (NOT(ISBLANK in the formula? (Notice I've changed the column that the entry info comes from). Also column E in sheet 2 is set up to - the difference from D & C,(=D-C). So it has entry's of ### until the enrty is made in D. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
Hi Dale
You don't need to use Not Isblank You could just amend your first formula =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10"),--(LTC!$E$3:$E$192<"")) Obviously you don't need this in the second formula, as if the cells are greater than 10 minutes, they cannot be blank. -- Regards Roger Govier "Dale G" wrote in message ... So far this works in column B. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10")) And this for column C. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10")) On sheet 3 column B This counts all the left nubers that match from sheet 2, then if the difference is more then 10 minutes it subtracts 1 from that count and places 1 in column C. I like the way it works, but it defeats the purpose of (NOT(ISBLANK(. Is there a way to keep the (NOT(ISBLANK in the formula? (Notice I've changed the column that the entry info comes from). Also column E in sheet 2 is set up to - the difference from D & C,(=D-C). So it has entry's of ### until the enrty is made in D. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
I gave that a try, & it still counts the lb. sign ####. When I run the mouse
over column E a window appears and the messages is, dates and times that are negative or too lage to diplay as ###. maybe there is a way to set up the formula to not count negative time or something like that. Or maybe I could go back to using column D with NOT(ISBLANK, and use a formula that calculates & IF D-C=between <0:10, and 0:10? what do you think? Possible? A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 ### 401S0459 904 0 5:18 ### 535S0518 908 0 5:25 ### 511S0518 "Roger Govier" wrote: Hi Dale You don't need to use Not Isblank You could just amend your first formula =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10"),--(LTC!$E$3:$E$192<"")) Obviously you don't need this in the second formula, as if the cells are greater than 10 minutes, they cannot be blank. -- Regards Roger Govier "Dale G" wrote in message ... So far this works in column B. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10")) And this for column C. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10")) On sheet 3 column B This counts all the left nubers that match from sheet 2, then if the difference is more then 10 minutes it subtracts 1 from that count and places 1 in column C. I like the way it works, but it defeats the purpose of (NOT(ISBLANK(. Is there a way to keep the (NOT(ISBLANK in the formula? (Notice I've changed the column that the entry info comes from). Also column E in sheet 2 is set up to - the difference from D & C,(=D-C). So it has entry's of ### until the enrty is made in D. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
Hi
I realise now, that column is a formula, so it will never be blank. Your formula in D must be =C2-B2 Change it to =IF(C2="",C2-B2) Then there will be Nulls "" in the cells, not negative times, at the Sumproduct should work -- Regards Roger Govier "Dale G" wrote in message ... I gave that a try, & it still counts the lb. sign ####. When I run the mouse over column E a window appears and the messages is, dates and times that are negative or too lage to diplay as ###. maybe there is a way to set up the formula to not count negative time or something like that. Or maybe I could go back to using column D with NOT(ISBLANK, and use a formula that calculates & IF D-C=between <0:10, and 0:10? what do you think? Possible? A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 ### 401S0459 904 0 5:18 ### 535S0518 908 0 5:25 ### 511S0518 "Roger Govier" wrote: Hi Dale You don't need to use Not Isblank You could just amend your first formula =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10"),--(LTC!$E$3:$E$192<"")) Obviously you don't need this in the second formula, as if the cells are greater than 10 minutes, they cannot be blank. -- Regards Roger Govier "Dale G" wrote in message ... So far this works in column B. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10")) And this for column C. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10")) On sheet 3 column B This counts all the left nubers that match from sheet 2, then if the difference is more then 10 minutes it subtracts 1 from that count and places 1 in column C. I like the way it works, but it defeats the purpose of (NOT(ISBLANK(. Is there a way to keep the (NOT(ISBLANK in the formula? (Notice I've changed the column that the entry info comes from). Also column E in sheet 2 is set up to - the difference from D & C,(=D-C). So it has entry's of ### until the enrty is made in D. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
sumproduct function, Bob P please see tracking sheet help
=IF(D3="","",D3-C3)
=SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10"),--(LTC!$E$3:$E$192<"")) =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10"),--(LTC!$E$3:$E$192<"")) Thank you, works like a charm. This suff is fun. "Roger Govier" wrote: Apologies, missed out part. That should have read =IF(C2="","",C2-B2) -- Regards Roger Govier "Roger Govier" <roger@technology4unospamdotcodotuk wrote in message ... Hi I realise now, that column is a formula, so it will never be blank. Your formula in D must be =C2-B2 Change it to =IF(C2="",C2-B2) Then there will be Nulls "" in the cells, not negative times, at the Sumproduct should work -- Regards Roger Govier "Dale G" wrote in message ... I gave that a try, & it still counts the lb. sign ####. When I run the mouse over column E a window appears and the messages is, dates and times that are negative or too lage to diplay as ###. maybe there is a way to set up the formula to not count negative time or something like that. Or maybe I could go back to using column D with NOT(ISBLANK, and use a formula that calculates & IF D-C=between <0:10, and 0:10? what do you think? Possible? A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 ### 401S0459 904 0 5:18 ### 535S0518 908 0 5:25 ### 511S0518 "Roger Govier" wrote: Hi Dale You don't need to use Not Isblank You could just amend your first formula =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10"),--(LTC!$E$3:$E$192<"")) Obviously you don't need this in the second formula, as if the cells are greater than 10 minutes, they cannot be blank. -- Regards Roger Govier "Dale G" wrote in message ... So far this works in column B. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192<=--"0:10")) And this for column C. =SUMPRODUCT(--(LEFT(LTC!$F$3:$F$192,4)=OTP!A8),--(LTC!$E$3:$E$192=--"0:10")) On sheet 3 column B This counts all the left nubers that match from sheet 2, then if the difference is more then 10 minutes it subtracts 1 from that count and places 1 in column C. I like the way it works, but it defeats the purpose of (NOT(ISBLANK(. Is there a way to keep the (NOT(ISBLANK in the formula? (Notice I've changed the column that the entry info comes from). Also column E in sheet 2 is set up to - the difference from D & C,(=D-C). So it has entry's of ### until the enrty is made in D. "Bob Phillips" wrote: 0-10, =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20<=--"0:10")) 10 =SUMPRODUCT(--(Sheet3!$E$2:$E$20<""),--(LEFT(Sheet3!$F$2:$F$20,LEN($A2))=$A2),--(Sheet3!$E$2:$E$20--"0:10")) and just copy down. -- __________________________________ HTH Bob "Dale G" wrote in message ... Example sheet 3 On Time Performance A B C Route 0-10 +10 535S 1 1 401S 1 535S 0 511S 0 404n 0 404s 0 Example sheet 2 A B C D E F Run Vehicle Time Actual Diff Schedule 924 0 4:48 4:59 0:11 535S0448 208 0 5:13 5:14 0:01 401S0459 904 0 5:18 5:20 0:02 535S0518 908 0 5:25 511S0518 I'm using sheet 3 to record the on time performance according to the scheduled time on sheet 2. Sheet 2 is to record the times vehicles pass a specific location. Column C is a set time, the vehicles are not allowed to pass until that time or later. Column D is used to enter the actual time the vehicle's pass. Column E on sheet 2 is set =D-C to record the difference of set time and actual time they pass. If the actual time the vehicle's pass is within 0 thru 10 minutes of the set time I record this in sheet 3 column B. If the actual time the vehicle's pass is greater than 10 minutes I record this on sheet 3, column C. I'm trying to have sheet 3 linked to sheet 2 so when the vehicle's pass and I enter the time on sheet 2 column D, sheet 3 will do the count from that entry, and place the count in the proper column. There is more info on this in my other post "Tracking sheet Help" hope this makes sence. Also my time format is set to, Time 13:30 "Bob Phillips" wrote: I think we need (a lot) more detail than that. -- __________________________________ HTH Bob "Dale G" wrote in message ... Tracking sheet help, i'm stuck. |
| All times are GMT +1. The time now is 11:46 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ExcelBanter.com