Sharepoint Linked File Causing #Value Error
 

I just spend the better part of the day creating a truly wonderful, yet
complex excel file, that had links to a second file I had open on my desktop.
It worked wonderfully well. However, the second file is on sharepoint.
When I re-opened my wonderful file, all the nice, complex calculated formulas
that pointed at the sharepoint stored file all contain #VALUE, and now it no
longer works. Anyone know how to address this behavior?

I plan to share file 1 with many folks, having it pointing at a data table
in that second excel file, but now, I cannot. (note: the links were not to
pivoted cells in the second table...just some complex sumifs and sumproduct
formulas). Help...just lost a day's work.

Patk

Sharepoint Linked File Causing #Value Error
 

I should explain better... HEre is what one of my cell formulas looked like
when it was first created:

=SUMIFS('[Program Tracker.xlsm]Detail'!$M:$M,'[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Here is what it looked like after I saved the first file, then re-opened it:

=SUMIFS('C:\Documents and Settings\pklocke\My Documents\01-IT
Optimization\Planning\[Program Tracker.xlsm]Detail'!$M:$M,'C:\Documents and
Settings\pklocke\My Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Figured a "picture" might explain better than I did...thanks!

Patk

Sharepoint Linked File Causing #Value Error
 

I don't know about SUMIFS because I don't have Excel 2007, but you
can't use SUMIF with an external closed file, and I suspect that is
why you are getting #VALUE.

When an external file is open, Excel only needs to have '[filename.xls]
Sheet_name'!cell_ref to be able to reference a cell, but if it is
closed then it needs the full path to the filename as well - this is
why your formula has suddenly expanded.

Can you not arrange to have the Program Tracker file open at the same
time?

Hope this helps.

Pete

On Nov 12, 1:25*am, PatK wrote:
I should explain better... *HEre is what one of my cell formulas looked like
when it was first created:

=SUMIFS('[Program Tracker.xlsm]Detail'!$M:$M,'[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Here is what it looked like after I saved the first file, then re-opened it:

=SUMIFS('C:\Documents and Settings\pklocke\My Documents\01-IT
Optimization\Planning\[Program Tracker.xlsm]Detail'!$M:$M,'C:\Documents and
Settings\pklocke\My Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Figured a "picture" might explain better than I did...thanks!

Patk

Sharepoint Linked File Causing #Value Error
 

Well...I could, but the problem is really that it changes that formula. I
have to then do a find/replace to delete the fully qualified reference, to
make it work again. I am trying to make it NOT do that. Is there something
comparable to SUMIFS that would allow access to an close file?

Also, please note that I mistakenly copied the wrong formula in my earlier
post. I was "trying" somethings, like hosting the second file on my PC (not
something I can do normally, as the file needs to be shared). But, pretend
that every where where you see C:\Documents and Settings\pklocke\My
Documents\01-IT
Optimization\Planning\ in my second post, really "normally" would read
something like http:\\sharepointservername.mycompany.com\folderna me\ That is
what is really happening.

Anyway, you point on sumifs is helpful. Any alternatives?

Thanks!

Patk

"Pete_UK" wrote:

I don't know about SUMIFS because I don't have Excel 2007, but you
can't use SUMIF with an external closed file, and I suspect that is
why you are getting #VALUE.

When an external file is open, Excel only needs to have '[filename.xls]
Sheet_name'!cell_ref to be able to reference a cell, but if it is
closed then it needs the full path to the filename as well - this is
why your formula has suddenly expanded.

Can you not arrange to have the Program Tracker file open at the same
time?

Hope this helps.

Pete

On Nov 12, 1:25 am, PatK wrote:
I should explain better... HEre is what one of my cell formulas looked like
when it was first created:

=SUMIFS('[Program Tracker.xlsm]Detail'!$M:$M,'[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Here is what it looked like after I saved the first file, then re-opened it:

=SUMIFS('C:\Documents and Settings\pklocke\My Documents\01-IT
Optimization\Planning\[Program Tracker.xlsm]Detail'!$M:$M,'C:\Documents and
Settings\pklocke\My Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$A:$A,"="&$D$6,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$O:$O,"=No",'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$F:$F,"="&$C30,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,""&$D$2,'C:\Documents and Settings\pklocke\My
Documents\01-IT Optimization\Planning\[Program
Tracker.xlsm]Detail'!$U:$U,"<="&$D$3)

Figured a "picture" might explain better than I did...thanks!

Patk