Hi everyone, hope someone out there can help me with this one, a bit long!
I'm a fairly new user and using Excell 2007.

Outside the main body of my worksheet I have set a LookUp table, with 2
columns starting with cell AM1 and finishing with cell AN29, with precise
values that will be needed in the spreadsheet:
Col AM Col An
20 10
18 9
16 8.50
14 7.50
12 6.50
11 6.00
10 5.50
..... .... etc. etc., to
2.00 1.25
1.88 1.20
1.75 1.00
1.63 0.91
1.50 0,83 in cell An29, this being the last value of the series.
(A total of 29 values that are not all listed here).

In my worksheet, the two columns involved a
Col G - Manual data entry
Entering randomly one value per cell out of the list
in col AM of the LookUp table (or none)
Col R - Calculated data
Returning the equivalent value in col AN of the LookUp table (or none)

*What I do - Row 7 : First entry
In col R, cell R7, I enter the following function:
=VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary)
and copy it right down the column (up to 400 entries)
Then, for each new entry that I enter (manually) in each cell of col G, I
modify the formula, in the same row in col R, to match my entry, in other
words I delete the "8" and replace it with the figure I have just typed in:
Example:
Cell G7 : type in 16,
Cell R7 : delete the 8 and replace by 16 to read:
=VLOOKUP(16,$AM$1:$AN$29,2,FALSE)
(which will give me the value 8.50 - col N of LookUp table)
and so on (for up to 400 cells) until I have completed the entries; in the
case of any blank cell in col G, I delete the formula in col R.
The whole process is really time consuming and I make quite a few errors.

*What I would like to achieve:
Have a function (in column R?) that would automatically return, in the
equivalent cell in col R, the relevant value that is listed in the column AN
of the LookUp table, everytime a new entry is inserted in any of the cells of
column G, but giving a blank when there are no equivalents.

Sorry this is so longwinded, but I wanted to present this as clearly as
possible so as not to confuse the issue in order to get an answer!

Thank you for any help, as it will be much appreciated

Hi,
I think you want to change your VLOOKUP to include a reference to column G

Type below in R7:
=VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)

You can then copy that down column R and the G7 will change automatically to
G8,G9,G10....

Let me know if that's what you're looking for.


"CAT" wrote:

Hi everyone, hope someone out there can help me with this one, a bit long!
I'm a fairly new user and using Excell 2007.

Outside the main body of my worksheet I have set a LookUp table, with 2
columns starting with cell AM1 and finishing with cell AN29, with precise
values that will be needed in the spreadsheet:
Col AM Col An
20 10
18 9
16 8.50
14 7.50
12 6.50
11 6.00
10 5.50
.... .... etc. etc., to
2.00 1.25
1.88 1.20
1.75 1.00
1.63 0.91
1.50 0,83 in cell An29, this being the last value of the series.
(A total of 29 values that are not all listed here).

In my worksheet, the two columns involved a
Col G - Manual data entry
Entering randomly one value per cell out of the list
in col AM of the LookUp table (or none)
Col R - Calculated data
Returning the equivalent value in col AN of the LookUp table (or none)

*What I do - Row 7 : First entry
In col R, cell R7, I enter the following function:
=VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary)
and copy it right down the column (up to 400 entries)
Then, for each new entry that I enter (manually) in each cell of col G, I
modify the formula, in the same row in col R, to match my entry, in other
words I delete the "8" and replace it with the figure I have just typed in:
Example:
Cell G7 : type in 16,
Cell R7 : delete the 8 and replace by 16 to read:
=VLOOKUP(16,$AM$1:$AN$29,2,FALSE)
(which will give me the value 8.50 - col N of LookUp table)
and so on (for up to 400 cells) until I have completed the entries; in the
case of any blank cell in col G, I delete the formula in col R.
The whole process is really time consuming and I make quite a few errors.

*What I would like to achieve:
Have a function (in column R?) that would automatically return, in the
equivalent cell in col R, the relevant value that is listed in the column AN
of the LookUp table, everytime a new entry is inserted in any of the cells of
column G, but giving a blank when there are no equivalents.

Sorry this is so longwinded, but I wanted to present this as clearly as
possible so as not to confuse the issue in order to get an answer!

Thank you for any help, as it will be much appreciated

Hi H2fcell,

Thanks a lot; that works great, I am getting exactly what I was looking for
and it's so simple to enter.

Just one thing: If I leave any cell in the G column blank, I am getting a
//N/A in column R and I wanted it blank, I suppose I could just erase the
formula, since it does not happen that often and it does not seem to
interfere with the working of it in the following cells.
Comparing to what I had to do before,it's all so simple; thanks again for
your help, you've saved me a lot of time.

"h2fcell" wrote:

Hi,
I think you want to change your VLOOKUP to include a reference to column G

Type below in R7:
=VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)

You can then copy that down column R and the G7 will change automatically to
G8,G9,G10....

Let me know if that's what you're looking for.


"CAT" wrote:

Hi everyone, hope someone out there can help me with this one, a bit long!
I'm a fairly new user and using Excell 2007.

Outside the main body of my worksheet I have set a LookUp table, with 2
columns starting with cell AM1 and finishing with cell AN29, with precise
values that will be needed in the spreadsheet:
Col AM Col An
20 10
18 9
16 8.50
14 7.50
12 6.50
11 6.00
10 5.50
.... .... etc. etc., to
2.00 1.25
1.88 1.20
1.75 1.00
1.63 0.91
1.50 0,83 in cell An29, this being the last value of the series.
(A total of 29 values that are not all listed here).

In my worksheet, the two columns involved a
Col G - Manual data entry
Entering randomly one value per cell out of the list
in col AM of the LookUp table (or none)
Col R - Calculated data
Returning the equivalent value in col AN of the LookUp table (or none)

*What I do - Row 7 : First entry
In col R, cell R7, I enter the following function:
=VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary)
and copy it right down the column (up to 400 entries)
Then, for each new entry that I enter (manually) in each cell of col G, I
modify the formula, in the same row in col R, to match my entry, in other
words I delete the "8" and replace it with the figure I have just typed in:
Example:
Cell G7 : type in 16,
Cell R7 : delete the 8 and replace by 16 to read:
=VLOOKUP(16,$AM$1:$AN$29,2,FALSE)
(which will give me the value 8.50 - col N of LookUp table)
and so on (for up to 400 cells) until I have completed the entries; in the
case of any blank cell in col G, I delete the formula in col R.
The whole process is really time consuming and I make quite a few errors.

*What I would like to achieve:
Have a function (in column R?) that would automatically return, in the
equivalent cell in col R, the relevant value that is listed in the column AN
of the LookUp table, everytime a new entry is inserted in any of the cells of
column G, but giving a blank when there are no equivalents.

Sorry this is so longwinded, but I wanted to present this as clearly as
possible so as not to confuse the issue in order to get an answer!

Thank you for any help, as it will be much appreciated

use
=if(ISNA(VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)))

"CAT" wrote:

Hi H2fcell,

Thanks a lot; that works great, I am getting exactly what I was looking for
and it's so simple to enter.

Just one thing: If I leave any cell in the G column blank, I am getting a
//N/A in column R and I wanted it blank, I suppose I could just erase the
formula, since it does not happen that often and it does not seem to
interfere with the working of it in the following cells.
Comparing to what I had to do before,it's all so simple; thanks again for
your help, you've saved me a lot of time.

"h2fcell" wrote:

Hi,
I think you want to change your VLOOKUP to include a reference to column G

Type below in R7:
=VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)

You can then copy that down column R and the G7 will change automatically to
G8,G9,G10....

Let me know if that's what you're looking for.


"CAT" wrote:

Hi everyone, hope someone out there can help me with this one, a bit long!
I'm a fairly new user and using Excell 2007.

Outside the main body of my worksheet I have set a LookUp table, with 2
columns starting with cell AM1 and finishing with cell AN29, with precise
values that will be needed in the spreadsheet:
Col AM Col An
20 10
18 9
16 8.50
14 7.50
12 6.50
11 6.00
10 5.50
.... .... etc. etc., to
2.00 1.25
1.88 1.20
1.75 1.00
1.63 0.91
1.50 0,83 in cell An29, this being the last value of the series.
(A total of 29 values that are not all listed here).

In my worksheet, the two columns involved a
Col G - Manual data entry
Entering randomly one value per cell out of the list
in col AM of the LookUp table (or none)
Col R - Calculated data
Returning the equivalent value in col AN of the LookUp table (or none)

*What I do - Row 7 : First entry
In col R, cell R7, I enter the following function:
=VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary)
and copy it right down the column (up to 400 entries)
Then, for each new entry that I enter (manually) in each cell of col G, I
modify the formula, in the same row in col R, to match my entry, in other
words I delete the "8" and replace it with the figure I have just typed in:
Example:
Cell G7 : type in 16,
Cell R7 : delete the 8 and replace by 16 to read:
=VLOOKUP(16,$AM$1:$AN$29,2,FALSE)
(which will give me the value 8.50 - col N of LookUp table)
and so on (for up to 400 cells) until I have completed the entries; in the
case of any blank cell in col G, I delete the formula in col R.
The whole process is really time consuming and I make quite a few errors.

*What I would like to achieve:
Have a function (in column R?) that would automatically return, in the
equivalent cell in col R, the relevant value that is listed in the column AN
of the LookUp table, everytime a new entry is inserted in any of the cells of
column G, but giving a blank when there are no equivalents.

Sorry this is so longwinded, but I wanted to present this as clearly as
possible so as not to confuse the issue in order to get an answer!

Thank you for any help, as it will be much appreciated

Hi VMohan,
Thank you very much for taking the time.
I have typed your formula in (several times, and carefully) but keep getting
"error in formula" by Excell. Unfortunately, I wouldn't know where the error
is as I am very much a newbie!
For the record, what I am exactly getting in col R (with no data in col G)
is as follows:
(sign for number (don't have it on the keyboard), then attached to it: N/A.
Does that make any sense?

"vmohan1978" wrote:

use
=if(ISNA(VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)))

"CAT" wrote:

Hi H2fcell,

Thanks a lot; that works great, I am getting exactly what I was looking for
and it's so simple to enter.

Just one thing: If I leave any cell in the G column blank, I am getting a
//N/A in column R and I wanted it blank, I suppose I could just erase the
formula, since it does not happen that often and it does not seem to
interfere with the working of it in the following cells.
Comparing to what I had to do before,it's all so simple; thanks again for
your help, you've saved me a lot of time.

"h2fcell" wrote:

Hi,
I think you want to change your VLOOKUP to include a reference to column G

Type below in R7:
=VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)

You can then copy that down column R and the G7 will change automatically to
G8,G9,G10....

Let me know if that's what you're looking for.


"CAT" wrote:

Hi everyone, hope someone out there can help me with this one, a bit long!
I'm a fairly new user and using Excell 2007.

Outside the main body of my worksheet I have set a LookUp table, with 2
columns starting with cell AM1 and finishing with cell AN29, with precise
values that will be needed in the spreadsheet:
Col AM Col An
20 10
18 9
16 8.50
14 7.50
12 6.50
11 6.00
10 5.50
.... .... etc. etc., to
2.00 1.25
1.88 1.20
1.75 1.00
1.63 0.91
1.50 0,83 in cell An29, this being the last value of the series.
(A total of 29 values that are not all listed here).

In my worksheet, the two columns involved a
Col G - Manual data entry
Entering randomly one value per cell out of the list
in col AM of the LookUp table (or none)
Col R - Calculated data
Returning the equivalent value in col AN of the LookUp table (or none)

*What I do - Row 7 : First entry
In col R, cell R7, I enter the following function:
=VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary)
and copy it right down the column (up to 400 entries)
Then, for each new entry that I enter (manually) in each cell of col G, I
modify the formula, in the same row in col R, to match my entry, in other
words I delete the "8" and replace it with the figure I have just typed in:
Example:
Cell G7 : type in 16,
Cell R7 : delete the 8 and replace by 16 to read:
=VLOOKUP(16,$AM$1:$AN$29,2,FALSE)
(which will give me the value 8.50 - col N of LookUp table)
and so on (for up to 400 cells) until I have completed the entries; in the
case of any blank cell in col G, I delete the formula in col R.
The whole process is really time consuming and I make quite a few errors.

*What I would like to achieve:
Have a function (in column R?) that would automatically return, in the
equivalent cell in col R, the relevant value that is listed in the column AN
of the LookUp table, everytime a new entry is inserted in any of the cells of
column G, but giving a blank when there are no equivalents.

Sorry this is so longwinded, but I wanted to present this as clearly as
possible so as not to confuse the issue in order to get an answer!

Thank you for any help, as it will be much appreciated

Well, you shouldn't be trying (however carefully) to type in a formula which
is given here. There is always a likelihood of typing errors, so instead of
reading and typing, just copy the formula from here and paste it into the
formula bar for the relevant cell on your worksheet.

Having said that, the problem in this case wasn't yours, as the formula
given by the previous poster had invalid syntax.
I wonder whether he had intended not to say
=if(ISNA(VLOOKUP(G7,$AM$1:$AN$29,2,FALSE))) but
=IF(ISNA(VLOOKUP(G7,$AM$1:$AN$29,2,FALSE)),"",VLOO KUP(G7,$AM$1:$AN$29,2,FALSE))When Excel tell you that the formula is invalid, it tries to help by puttingthe cursor where the error is, and Excel help for the function in questionwill tell you the required syntax (and usually give you examples and in a"Show Also" link will often show related functions).In this case your IF function has a condition [the first parameter of theIF], but it doesn't have the consequence if true [2nd parameter of the IF],nor does it have the consequence if false [which is the 3rd parameter of theIF, which is optional in the syntax, but probably a significant parameter inthis case as the 2nd parameter is presumably handling the error case and youneed to handle the non-error case too].David Biddulph"CAT" wrote in ... Hi VMohan, Thank you very much for taking the time. I have typed your formula in (several times, and carefully) but keepgetting "error in formula" by Excell. Unfortunately, I wouldn't know where theerror is as I am very much a newbie! For the record, what I am exactly getting in col R (with no data in col G) is as follows: (sign for number (don't have it on the keyboard), then attached to it:N/A. Does that make any sense? "vmohan1978" wrote: use =if(ISNA(VLOOKUP(G7,$AM$1:$AN$29,2,FALSE))) "CAT" wrote: Hi H2fcell, Thanks a lot; that works great, I am getting exactly what I was lookingfor and it's so simple to enter. Just one thing: If I leave any cell in the G column blank, I am gettinga //N/A in column R and I wanted it blank, I suppose I could just erasethe formula, since it does not happen that often and it does not seem to interfere with the working of it in the following cells. Comparing to what I had to do before,it's all so simple; thanks againfor your help, you've saved me a lot of time. "h2fcell" wrote: Hi, I think you want to change your VLOOKUP to include a reference tocolumn G Type below in R7: =VLOOKUP(G7,$AM$1:$AN$29,2,FALSE) You can then copy that down column R and the G7 will changeautomatically to G8,G9,G10.... Let me know if that's what you're looking for. "CAT" wrote: Hi everyone, hope someone out there can help me with this one, abit long! I'm a fairly new user and using Excell 2007. Outside the main body of my worksheet I have set a LookUp table,with 2 columns starting with cell AM1 and finishing with cell AN29, withprecise values that will be needed in the spreadsheet: Col AM Col An 20 10 18 9 16 8.50 14 7.50 12 6.50 11 6.00 10 5.50 .... .... etc. etc., to 2.00 1.25 1.88 1.20 1.75 1.00 1.63 0.91 1.50 0,83 in cell An29, this being the last value of theseries. (A total of 29 values that are not all listed here). In my worksheet, the two columns involved a Col G - Manual data entry Entering randomly one value per cell out of the list in col AM of the LookUp table (or none) Col R - Calculated data Returning the equivalent value in col AN of the LookUp table (ornone) *What I do - Row 7 : First entry In col R, cell R7, I enter the following function: =VLOOKUP(8,$AM$1:$AN$29,2,FALSE) (the figure "8" being temporary) and copy it right down the column (up to 400 entries) Then, for each new entry that I enter (manually) in each cell ofcol G, I modify the formula, in the same row in col R, to match my entry, inother words I delete the "8" and replace it with the figure I have justtyped in: Example: Cell G7 : type in 16, Cell R7 : delete the 8 and replace by 16 to read: =VLOOKUP(16,$AM$1:$AN$29,2,FALSE) (which will give me the value 8.50 - col N of LookUp table) and so on (for up to 400 cells) until I have completed the entries;in the case of any blank cell in col G, I delete the formula in col R. The whole process is really time consuming and I make quite a fewerrors. *What I would like to achieve: Have a function (in column R?) that would automatically return, inthe equivalent cell in col R, the relevant value that is listed in thecolumn AN of the LookUp table, everytime a new entry is inserted in any ofthe cells of column G, but giving a blank when there are no equivalents. Sorry this is so longwinded, but I wanted to present this asclearly as possible so as not to confuse the issue in order to get an answer! Thank you for any help, as it will be much appreciated