Match Criteria & Return Sequential Count
 

Hi All,

I would like a formula that can return a numeric sequential count down a
single column based on content of another column. The count will be
sequential until it meets all the criteria, wherein a zero (0) should be
returned and the count reset, starting at one (1), until the criteria is
again met.

Match criteria in this order:
1) match specific numeric value (input cell for varying criterion); 106.
2) match specific text value, the letter "C" (static criterion); in row
directly below 106.
3) match the same numeric value as in (1) above:106; but this must be exactly
106 rows after matching "C" in (2) above.
4) match specific text value, the letter "C" (static criterion); in row
directly below the second 106.

Criteria met, I would like the value zero (0) to be returned to the cell that
houses the second instance of the text value, letter "C".

The data starts in row 4, column "BR" holds numeric and text data. The
sequential count should be returned down column "BS".

Sample Data:
col BS BR
row4 101 1
row5 102 2
row6 103 3
row7 104 4
row8 C 5
row9 101 6
row10 102 7
row11 103 8
row12 104 9
row13 105 10
row14 106 11
row15 C 12
row16 101 13
row17 102 14
row18 103 15
row19 104 16
row20 105 17
row21 106 18
row22 107 19
row23 108 20
row24 109 21
row25 110 22
row26 C 23
row27 101 24
row28 102 25
row29 103 26
row30 104 27
row31 105 28
row32 106 29
row33 C 30
row34 101 31
row35 102 32
row36 103 33
row37 104 34
row38 105 35
row39 106 36
row40 C 0
row41 101 1
row42 102 2

Expected Results:
Column "BR", Row 40 = 0

Looking for numeric value 106 with "C" on the row below = row 33 and then the
same number of rows (106) directly below the first "C", with a "C" on the
next row = row 40. The sequential count should return zero (0) in column "BR"
row 40.

Thanks
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Sam,

Please explain again why the count reset to zero in Row 40

Mike

"Sam via OfficeKB.com" wrote:

Hi All,

I would like a formula that can return a numeric sequential count down a
single column based on content of another column. The count will be
sequential until it meets all the criteria, wherein a zero (0) should be
returned and the count reset, starting at one (1), until the criteria is
again met.

Match criteria in this order:
1) match specific numeric value (input cell for varying criterion); 106.
2) match specific text value, the letter "C" (static criterion); in row
directly below 106.
3) match the same numeric value as in (1) above:106; but this must be exactly
106 rows after matching "C" in (2) above.
4) match specific text value, the letter "C" (static criterion); in row
directly below the second 106.

Criteria met, I would like the value zero (0) to be returned to the cell that
houses the second instance of the text value, letter "C".

The data starts in row 4, column "BR" holds numeric and text data. The
sequential count should be returned down column "BS".

Sample Data:
col BS BR
row4 101 1
row5 102 2
row6 103 3
row7 104 4
row8 C 5
row9 101 6
row10 102 7
row11 103 8
row12 104 9
row13 105 10
row14 106 11
row15 C 12
row16 101 13
row17 102 14
row18 103 15
row19 104 16
row20 105 17
row21 106 18
row22 107 19
row23 108 20
row24 109 21
row25 110 22
row26 C 23
row27 101 24
row28 102 25
row29 103 26
row30 104 27
row31 105 28
row32 106 29
row33 C 30
row34 101 31
row35 102 32
row36 103 33
row37 104 34
row38 105 35
row39 106 36
row40 C 0
row41 101 1
row42 102 2

Expected Results:
Column "BR", Row 40 = 0

Looking for numeric value 106 with "C" on the row below = row 33 and then the
same number of rows (106) directly below the first "C", with a "C" on the
next row = row 40. The sequential count should return zero (0) in column "BR"
row 40.

Thanks
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Hi Mike,

Thanks for reply.

The zero in row 40 represents the match of all criteria in the order stated.
The count should reset to 1 in the row after the zero (0) when all criteria
is met.

Cheers,
Sam

Mike H wrote:
Sam,

Please explain again why the count reset to zero in Row 40

Mike

--
Message posted via http://www.officekb.com

Match Criteria & Return Sequential Count
 

Sam,

I think Iv'e got it

Find a variable number x in column A
When found there must be a C in the row below
Match the variable number x rows above the C
The second variable number must also have a C in the row below

based upon your data any solution looking for a number higher than 3 will
fail because you can't search more than 3 rows back above Row 4 so to get
around this instead of looking back x rows as you ask my formula looks back
only 8 rows and I start in Row 16 to give some breating space..
My variable number is in D1

When you resolve the above problem you can change the formula

change -8 to
D1*-1

change -7 to
(D1*-1)+1

=IF(AND(A16="C",A15=$D$1,OFFSET(A16,-8,0)=$D$1,OFFSET(A16,-7,0)="C"),0,C15+1)

Mike

"Sam via OfficeKB.com" wrote:

Hi All,

I would like a formula that can return a numeric sequential count down a
single column based on content of another column. The count will be
sequential until it meets all the criteria, wherein a zero (0) should be
returned and the count reset, starting at one (1), until the criteria is
again met.

Match criteria in this order:
1) match specific numeric value (input cell for varying criterion); 106.
2) match specific text value, the letter "C" (static criterion); in row
directly below 106.
3) match the same numeric value as in (1) above:106; but this must be exactly
106 rows after matching "C" in (2) above.
4) match specific text value, the letter "C" (static criterion); in row
directly below the second 106.

Criteria met, I would like the value zero (0) to be returned to the cell that
houses the second instance of the text value, letter "C".

The data starts in row 4, column "BR" holds numeric and text data. The
sequential count should be returned down column "BS".

Sample Data:
col BS BR
row4 101 1
row5 102 2
row6 103 3
row7 104 4
row8 C 5
row9 101 6
row10 102 7
row11 103 8
row12 104 9
row13 105 10
row14 106 11
row15 C 12
row16 101 13
row17 102 14
row18 103 15
row19 104 16
row20 105 17
row21 106 18
row22 107 19
row23 108 20
row24 109 21
row25 110 22
row26 C 23
row27 101 24
row28 102 25
row29 103 26
row30 104 27
row31 105 28
row32 106 29
row33 C 30
row34 101 31
row35 102 32
row36 103 33
row37 104 34
row38 105 35
row39 106 36
row40 C 0
row41 101 1
row42 102 2

Expected Results:
Column "BR", Row 40 = 0

Looking for numeric value 106 with "C" on the row below = row 33 and then the
same number of rows (106) directly below the first "C", with a "C" on the
next row = row 40. The sequential count should return zero (0) in column "BR"
row 40.

Thanks
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

I should add C15 must be blank or 0

"Mike H" wrote:

Sam,

I think Iv'e got it

Find a variable number x in column A
When found there must be a C in the row below
Match the variable number x rows above the C
The second variable number must also have a C in the row below

based upon your data any solution looking for a number higher than 3 will
fail because you can't search more than 3 rows back above Row 4 so to get
around this instead of looking back x rows as you ask my formula looks back
only 8 rows and I start in Row 16 to give some breating space..
My variable number is in D1

When you resolve the above problem you can change the formula

change -8 to
D1*-1

change -7 to
(D1*-1)+1

=IF(AND(A16="C",A15=$D$1,OFFSET(A16,-8,0)=$D$1,OFFSET(A16,-7,0)="C"),0,C15+1)

Mike

"Sam via OfficeKB.com" wrote:

Hi All,

I would like a formula that can return a numeric sequential count down a
single column based on content of another column. The count will be
sequential until it meets all the criteria, wherein a zero (0) should be
returned and the count reset, starting at one (1), until the criteria is
again met.

Match criteria in this order:
1) match specific numeric value (input cell for varying criterion); 106.
2) match specific text value, the letter "C" (static criterion); in row
directly below 106.
3) match the same numeric value as in (1) above:106; but this must be exactly
106 rows after matching "C" in (2) above.
4) match specific text value, the letter "C" (static criterion); in row
directly below the second 106.

Criteria met, I would like the value zero (0) to be returned to the cell that
houses the second instance of the text value, letter "C".

The data starts in row 4, column "BR" holds numeric and text data. The
sequential count should be returned down column "BS".

Sample Data:
col BS BR
row4 101 1
row5 102 2
row6 103 3
row7 104 4
row8 C 5
row9 101 6
row10 102 7
row11 103 8
row12 104 9
row13 105 10
row14 106 11
row15 C 12
row16 101 13
row17 102 14
row18 103 15
row19 104 16
row20 105 17
row21 106 18
row22 107 19
row23 108 20
row24 109 21
row25 110 22
row26 C 23
row27 101 24
row28 102 25
row29 103 26
row30 104 27
row31 105 28
row32 106 29
row33 C 30
row34 101 31
row35 102 32
row36 103 33
row37 104 34
row38 105 35
row39 106 36
row40 C 0
row41 101 1
row42 102 2

Expected Results:
Column "BR", Row 40 = 0

Looking for numeric value 106 with "C" on the row below = row 33 and then the
same number of rows (106) directly below the first "C", with a "C" on the
next row = row 40. The sequential count should return zero (0) in column "BR"
row 40.

Thanks
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Hi Mike,

Many thanks for assistance. Still trying to find a workaround to layout point
raised below.
Could the MATCH function assist in finding the 1st leg of the variable value
and then use OFFSET for the 2nd leg of variable value.

Mike H wrote:
Sam,

I think Iv'e got it

Find a variable number x in column A
When found there must be a C in the row below
Match the variable number x rows above the C
The second variable number must also have a C in the row below

Yes

based upon your data any solution looking for a number higher than 3 will
fail because you can't search more than 3 rows back above Row 4 so to get
around this instead of looking back x rows as you ask my formula looks back
only 8 rows and I start in Row 16 to give some breating space..
My variable number is in D1

Trying to find a workaround. Stuck with the data layout, starting in row 4.

When you resolve the above problem you can change the formula

change -8 to
D1*-1

change -7 to
(D1*-1)+1

=IF(AND(A16="C",A15=$D$1,OFFSET(A16,-8,0)=$D$1,OFFSET(A16,-7,0)="C"),0,C15+1)

Cheers,
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Hi. Please explain how you would do this on paper. Then we can take your
solution and create a solution in Excel.

Tyro

"Sam via OfficeKB.com" <u4102@uwe wrote in message
news:7f7c995b1f868@uwe...
Hi All,

I would like a formula that can return a numeric sequential count down a
single column based on content of another column. The count will be
sequential until it meets all the criteria, wherein a zero (0) should be
returned and the count reset, starting at one (1), until the criteria is
again met.

Match criteria in this order:
1) match specific numeric value (input cell for varying criterion); 106.
2) match specific text value, the letter "C" (static criterion); in row
directly below 106.
3) match the same numeric value as in (1) above:106; but this must be
exactly
106 rows after matching "C" in (2) above.
4) match specific text value, the letter "C" (static criterion); in row
directly below the second 106.

Criteria met, I would like the value zero (0) to be returned to the cell
that
houses the second instance of the text value, letter "C".

The data starts in row 4, column "BR" holds numeric and text data. The
sequential count should be returned down column "BS".

Sample Data:
col BS BR
row4 101 1
row5 102 2
row6 103 3
row7 104 4
row8 C 5
row9 101 6
row10 102 7
row11 103 8
row12 104 9
row13 105 10
row14 106 11
row15 C 12
row16 101 13
row17 102 14
row18 103 15
row19 104 16
row20 105 17
row21 106 18
row22 107 19
row23 108 20
row24 109 21
row25 110 22
row26 C 23
row27 101 24
row28 102 25
row29 103 26
row30 104 27
row31 105 28
row32 106 29
row33 C 30
row34 101 31
row35 102 32
row36 103 33
row37 104 34
row38 105 35
row39 106 36
row40 C 0
row41 101 1
row42 102 2

Expected Results:
Column "BR", Row 40 = 0

Looking for numeric value 106 with "C" on the row below = row 33 and then
the
same number of rows (106) directly below the first "C", with a "C" on the
next row = row 40. The sequential count should return zero (0) in column
"BR"
row 40.

Thanks
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Sam,

Wrapping the whole thing in iserror seems to work for your data layout, try
this

=IF(ISERROR(IF(AND(A4="C",A3=$D$1,OFFSET(A4,$D$1*-1,0)=$D$1,OFFSET(A4,($D$1*-1)+1,0)="C"),0,C3+1)),C3+1,IF(AND(A4="C",A3=$D$1,O FFSET(A4,$D$1*-1,0)=$D$1,OFFSET(A4,($D$1*-1)+1,0)="C"),0,C3+1))

This now includes absolute references to D1 which is the search No and also
the amount of rows the dormula looks back to find the previous match.

Mike

"Sam via OfficeKB.com" wrote:

Hi Mike,

Many thanks for assistance. Still trying to find a workaround to layout point
raised below.
Could the MATCH function assist in finding the 1st leg of the variable value
and then use OFFSET for the 2nd leg of variable value.

Mike H wrote:
Sam,

I think Iv'e got it

Find a variable number x in column A
When found there must be a C in the row below
Match the variable number x rows above the C
The second variable number must also have a C in the row below

Yes

based upon your data any solution looking for a number higher than 3 will
fail because you can't search more than 3 rows back above Row 4 so to get
around this instead of looking back x rows as you ask my formula looks back
only 8 rows and I start in Row 16 to give some breating space..
My variable number is in D1

Trying to find a workaround. Stuck with the data layout, starting in row 4.

When you resolve the above problem you can change the formula

change -8 to
D1*-1

change -7 to
(D1*-1)+1

=IF(AND(A16="C",A15=$D$1,OFFSET(A16,-8,0)=$D$1,OFFSET(A16,-7,0)="C"),0,C15+1)

Cheers,
Sam

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1

Match Criteria & Return Sequential Count
 

Hi Mike,

Thanks again for further assistance.

I've tried the ISERROR formula solution, it does provide a sequential count
but does not return the required zero (0).

Further assistance appreicated.

Cheers,
Sam

Mike H wrote:
Sam,

Wrapping the whole thing in iserror seems to work for your data layout, try
this

=IF(ISERROR(IF(AND(A4="C",A3=$D$1,OFFSET(A4,$D$ 1*-1,0)=$D$1,OFFSET(A4,($D$1*-1)+1,0)="C"),0,C3+1)),C3+1,IF(AND(A4="C",A3=$D$1,O FFSET(A4,$D$1*-1,0)=$D$1,OFFSET(A4,($D$1*-1)+1,0)="C"),0,C3+1))

This now includes absolute references to D1 which is the search No and also
the amount of rows the dormula looks back to find the previous match.

Mike

--
Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.a...tions/200802/1