Help in VBA code
 

All,
I am new to VBA. I have an xl sheet where it has the code that calculates
vacation (R&R) times for employees. The code was written by a person who left
the company a long time ago. But I need to make some modifications to the
code and cannot fiure out how it calculates. I was able to figure out what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366 days
from the contract date, that mean every 366 dyas an employee will get 1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " & e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row & ")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub

Help in VBA code
 

m and x appear to be simple counters, incrementing with certain conditions
are met and other values are also updated. Since they are only tested for
zero or non-zero late in the process, they're just acting as flags to
indicate whethere any cells in either group were processed earlier.

"Gladiator" wrote:

All,
I am new to VBA. I have an xl sheet where it has the code that calculates
vacation (R&R) times for employees. The code was written by a person who left
the company a long time ago. But I need to make some modifications to the
code and cannot fiure out how it calculates. I was able to figure out what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366 days
from the contract date, that mean every 366 dyas an employee will get 1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " & e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row & ")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub

Help in VBA code
 

Thanks J, but here is the modification I wanted to make in the codes:

1. rr = every 90 days. so Cells(e.Row, 52) should show how many R&Rs the
employee has had or will have within the contract date (c) and end date
(which is b)
2. remob = every 366 days. so Cells(e.Row, 53) should show how many remob
R&Rs employee has had or will have from the contract date (c) to the end date
(b)
3. eligible R&Rs is total of regular R&Rs (rr) and remob that should show up
in Cells(e.Row, 51).

Can you help mw with this please? Thanks.
"JLatham" wrote:

m and x appear to be simple counters, incrementing with certain conditions
are met and other values are also updated. Since they are only tested for
zero or non-zero late in the process, they're just acting as flags to
indicate whethere any cells in either group were processed earlier.

"Gladiator" wrote:

All,
I am new to VBA. I have an xl sheet where it has the code that calculates
vacation (R&R) times for employees. The code was written by a person who left
the company a long time ago. But I need to make some modifications to the
code and cannot fiure out how it calculates. I was able to figure out what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366 days
from the contract date, that mean every 366 dyas an employee will get 1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " & e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row & ")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub

Help in VBA code
 

J, can you please explain in a more spesific way so that I can try to solve
it myself? Greatly appreciate any help. Thanks.

"JLatham" wrote:

m and x appear to be simple counters, incrementing with certain conditions
are met and other values are also updated. Since they are only tested for
zero or non-zero late in the process, they're just acting as flags to
indicate whethere any cells in either group were processed earlier.

"Gladiator" wrote:

All,
I am new to VBA. I have an xl sheet where it has the code that calculates
vacation (R&R) times for employees. The code was written by a person who left
the company a long time ago. But I need to make some modifications to the
code and cannot fiure out how it calculates. I was able to figure out what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366 days
from the contract date, that mean every 366 dyas an employee will get 1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " & e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row & ")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub

Help in VBA code
 

Give me a little time to examine it all in more detail. It might even help
if you could send a copy of the workbook with data in it to me so I can have
data to test with. You could send it to (remove spaces)
HelpFrom @ JLatham Site .com
Of course if it holds confidential/personal info, then I understand. But I
still need some time to examine it all and get a more complete understanding
of it all.

"Gladiator" wrote:

Thanks J, but here is the modification I wanted to make in the codes:

1. rr = every 90 days. so Cells(e.Row, 52) should show how many R&Rs the
employee has had or will have within the contract date (c) and end date
(which is b)
2. remob = every 366 days. so Cells(e.Row, 53) should show how many remob
R&Rs employee has had or will have from the contract date (c) to the end date
(b)
3. eligible R&Rs is total of regular R&Rs (rr) and remob that should show up
in Cells(e.Row, 51).

Can you help mw with this please? Thanks.
"JLatham" wrote:

m and x appear to be simple counters, incrementing with certain conditions
are met and other values are also updated. Since they are only tested for
zero or non-zero late in the process, they're just acting as flags to
indicate whethere any cells in either group were processed earlier.

"Gladiator" wrote:

All,
I am new to VBA. I have an xl sheet where it has the code that calculates
vacation (R&R) times for employees. The code was written by a person who left
the company a long time ago. But I need to make some modifications to the
code and cannot fiure out how it calculates. I was able to figure out what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366 days
from the contract date, that mean every 366 dyas an employee will get 1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " & e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row & ")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub

Help in VBA code
 

m and x appear to be counters that are used to control which of the If ...
Then statements will execute to calculate the R&R time. If the Do Loop
executes twice with the criteria that adds one to the value of m or x, as
the case may be, then the value of m or rr will equal 2 and the Else part of
the If ... Then statement executes and resets the m to 0. The x value is
reset to 0 in each For ... Each loop.



"Gladiator" wrote in message
...
J, can you please explain in a more spesific way so that I can try to
solve
it myself? Greatly appreciate any help. Thanks.

"JLatham" wrote:

m and x appear to be simple counters, incrementing with certain
conditions
are met and other values are also updated. Since they are only tested
for
zero or non-zero late in the process, they're just acting as flags to
indicate whethere any cells in either group were processed earlier.

"Gladiator" wrote:

All,
I am new to VBA. I have an xl sheet where it has the code that
calculates
vacation (R&R) times for employees. The code was written by a person
who left
the company a long time ago. But I need to make some modifications to
the
code and cannot fiure out how it calculates. I was able to figure out
what
'a', 'b', and 'c' are in the code though. Like Remob happens every 366
days
from the contract date, that mean every 366 dyas an employee will get
1.
Regular R&Rs are taken every 90 days, that means 1 every 90 days and
Reg RRs
are the R&Rs other than Remob ones. Eligible R&Rs is Reg RR + Remob. I
cannot
figure out what "m" and "x" are? Thanks in advance.

Private Sub RR_Calculation_Click()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Response = MsgBox(prompt:="Proceed with running R&R computation?",
Buttons:=vbYesNo)
If Response = vbYes Then
Ext = 0
Else
Exit Sub
End If
For Each e In Range("D14:D3000")

a1 = Cells(e.Row, 23) 'st date
If IsDate(a1) Then
a = DateValue(a1)
Else
a = 0
End If

b1 = Cells(e.Row, 24) 'end date
If IsDate(b1) Then
b = DateValue(b1)
Else
b = 0
End If

c1 = Cells(e.Row, 16) 'contr date
If IsDate(c1) Then
c = DateValue(c1)
Else
c = 0
End If

SAP = Cells(e.Row, 8)


m = 0
rr = 0
remob = 0
x = 0

If Cells(e.Row, 4).Value < "" Then

If a = 0 Or b = 0 Or a b Or a = b Or Not IsDate(a) Or Not
IsDate(b) Or a1 < a Or b1 < b Then
MsgBox ("Please correct ETC Start and End dates (row " &
e.Row &
") and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

ElseIf Right(Cells(e.Row, 4), 2) = "LN" Then

ElseIf c = 0 Or b = c Or Not IsDate(c) Or c1 < c Then
MsgBox ("Please correct the Contract date (row " & e.Row &
")
and re-run the R&R Calculation!")
Application.Calculation = xlCalculationAutomatic
Exit Sub

Else

Do While c < a 'Contr date < St Date
If m = 2 Then
c = c + 95
m = 0
x = x + 1
Else
c = c + 90
m = m + 1
x = x + 1
End If
Loop

'If Cells(e.Row, 49).Value = 2 Then


If x < 0 Then
If m = 0 Then
remob = remob + 1
Else
rr = rr + 1
End If
End If


Do While c <= b + 1
If b + 1 - c < 30 And x < 0 Then
If m = 0 Then
remob = remob - 1
Else
rr = rr - 1
End If
x = x + 1
End If

If m = 2 Then
c = c + 90
remob = remob + 1
m = 0
x = x + 1
Else
c = c + 90
rr = rr + 1
m = m + 1
x = x + 1
End If

Loop

If m = 0 And x < 0 Then
remob = remob - 1
ElseIf x < 0 Then
rr = rr - 1
End If

End If

End If

If Cells(e.Row, 11) = 0 Or Cells(e.Row, 11).Value = "" Then
Cells(e.Row, 51).Value = 0 'Eligible R&Rs
Cells(e.Row, 52).Value = 0 'Regular R&R
Cells(e.Row, 53).Value = 0 'Remob R&R
Else
Cells(e.Row, 51).Value = rr + remob
Cells(e.Row, 52).Value = rr
Cells(e.Row, 53).Value = remob


'Eligible R&Rs = rr + remob + rrbc
'Reg R&R = rr
'Remob R&R = remob

End If


Next e

Application.Calculation = xlCalculationAutomatic

Application.ScreenUpdating = True

MsgBox (" Done!")

End Sub