Home |
Search |
Today's Posts |
|
#1
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
I have a user form with 3 combo boxes that I would like to set up to narrow
down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#2
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
A good place to start would be he
http://www.contextures.com/xlDataVal02.html "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#3
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
On second thought, that page at Contextures may not be what you want. I
realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#4
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the
Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#5
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
Brian,
I'm thinking that having all of the information on a single sheet, at least the following: Customer Name | State | CLLI and having that list sorted by Customer name with second field sort on the State. Need another list of just unique customer names also, to populate Customer_11 with. With that setup, you can 'react' to a change in Customer_11 by then going through the full list to find the Customer Name and rapidly fill State_11 with just a few .AddItem statements in a loop. Same for getting the CLLI once the Customer and State have been chosen. If you want to take this off-line and maybe send me a copy of the workbook as you have it now, you can reach me at (remove spaces) HelpFrom @JLatham Site. com (Side note: CLLI makes me think of Telco network engineering - and I have some experience with that from some years ago of doing custom code for SW Bell -- SBC Corp and Ameritech. Support ended before name change to AT&T. Of course you may be in a different industry and CLLI may mean something totally different). "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#6
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
I sent you the user Form ith the Data sheets in it.
I think that 2 fresh eyes are definatlly better than mine. OssieMac has been a huge help in my progression of this project. I am not sure how you guys know all this stuff like you do. It absolutly amazes me of the knowledge base you guys have. I can only hope to learn half of what you guys know. "JLatham" wrote: Brian, I'm thinking that having all of the information on a single sheet, at least the following: Customer Name | State | CLLI and having that list sorted by Customer name with second field sort on the State. Need another list of just unique customer names also, to populate Customer_11 with. With that setup, you can 'react' to a change in Customer_11 by then going through the full list to find the Customer Name and rapidly fill State_11 with just a few .AddItem statements in a loop. Same for getting the CLLI once the Customer and State have been chosen. If you want to take this off-line and maybe send me a copy of the workbook as you have it now, you can reach me at (remove spaces) HelpFrom @JLatham Site. com (Side note: CLLI makes me think of Telco network engineering - and I have some experience with that from some years ago of doing custom code for SW Bell -- SBC Corp and Ameritech. Support ended before name change to AT&T. Of course you may be in a different industry and CLLI may mean something totally different). "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#7
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
You are correct it is for Telco CO. I am a vendor for them.
"JLatham" wrote: Brian, I'm thinking that having all of the information on a single sheet, at least the following: Customer Name | State | CLLI and having that list sorted by Customer name with second field sort on the State. Need another list of just unique customer names also, to populate Customer_11 with. With that setup, you can 'react' to a change in Customer_11 by then going through the full list to find the Customer Name and rapidly fill State_11 with just a few .AddItem statements in a loop. Same for getting the CLLI once the Customer and State have been chosen. If you want to take this off-line and maybe send me a copy of the workbook as you have it now, you can reach me at (remove spaces) HelpFrom @JLatham Site. com (Side note: CLLI makes me think of Telco network engineering - and I have some experience with that from some years ago of doing custom code for SW Bell -- SBC Corp and Ameritech. Support ended before name change to AT&T. Of course you may be in a different industry and CLLI may mean something totally different). "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#8
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
Hi Brian,
I have posted code on your other thread for this. However, I see that you have been offered direct help by JLatham via email so go for it; afterall he is an MVP so he could well provide a better answer than I have. -- Regards, OssieMac "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#9
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
"afterall he is an MVP so he could well provide a better answer than I have"
Ain't necessarily true! I didn't see your code - might just be the ticket. And if you're that far along with it, I think you've probably got a better grasp of his worksheet/workbook layout than I do at the moment. Can you post link to that other thread? I don't recall where it was. "OssieMac" wrote: Hi Brian, I have posted code on your other thread for this. However, I see that you have been offered direct help by JLatham via email so go for it; afterall he is an MVP so he could well provide a better answer than I have. -- Regards, OssieMac "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
#10
Posted to microsoft.public.excel.programming
|
|||
|
|||
How do I setup a cascading combo boxes?
Nevermind, I found the thread.
"OssieMac" wrote: Hi Brian, I have posted code on your other thread for this. However, I see that you have been offered direct help by JLatham via email so go for it; afterall he is an MVP so he could well provide a better answer than I have. -- Regards, OssieMac "Brian" wrote: I have a Workbook "Master User Form" Worksheet (Legacy B) that has all the Data on it. My combo boxes are as follows: Combo box 1 = Customer_11 (Approx 8 customers) Combo box 2 = State_11 (Approx 9 States) Combo box 3 = CLLI_Code_1 (400 Offices per State) My goal is The user to Select from Combo Box 1 (Customer_11) That narrows the selection down to what state for that customer which is Combo box 2 (State_11) When combo Box 2 is selected that narrows down the selection to only the CLLI codes Combo Box 3 for that customer in that state. Now on my Worksheet all the data is in columns as shown below Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Each Customers Info is in the rows. Each row contains 1 customer. If the Data needs to be rearanged another way tell me and I will change it. What I planned was for each Customer to have there own Worksheet broke down by State. Example: Customer 1 That customer is in 9-States States = AL, Fl, GA, KY, LA, MS, NC, SC, TN CLLI = ATLNGACS Each state has approx 400 sites for that customer. I want to do this the easiest way possible, so if that data has to be moved around then the girl at the office has job security. LOL Any help or sugestions would be greatly apprieciated. "JLatham" wrote: On second thought, that page at Contextures may not be what you want. I realized after posting you're speaking of combo boxes on a UserForm, not data validation lists on the worksheet. To really help, it would be useful to know what you intend to use each combo box for, and what a change in one of them would do for the next one in the sequence. You'll (probably) want to set them up initially in the Form's Initialize event, then alter the source rows for the 'downstream' combo boxes based on a change in the upstream boxes. "Brian" wrote: I have a user form with 3 combo boxes that I would like to set up to narrow down information on a worksheet in the same workbook as the User Form. Can anyone help me or guide me on how to do it? Data in Worksheet -------------------------------- GEORGIA OFFICES CLLI NAME ADDRESS 1 ADDRESS 2 CITY STATE ZIP GLC Code T-Base Data is layed out across the worksheet. Data in Worksheet -------------------------------- Clli: ACWOGAMA Add 1: 4745 Logan Road City: Acworth St: GA Zip: 30101 GLC: F5341 Clli: AGSTGAAU Add 1: 3523 Washington Street City: Augusta St: GA Zip: 30907 GLC: R3547 Clli: AGSTGABM Add 1: 1490 Ellis Street City: Augusta St: GA Zip: 30902 GLC: R6341 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cascading Combo Boxes | Excel Programming | |||
Cascading combo boxes for project | New Users to Excel | |||
Cascading Combo Boxes | Excel Programming | |||
cascading combo boxes | Excel Programming | |||
how to use combo cascading box | Excel Programming |