Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Hi,

I need to rearrange columns on many sheets in a certain order based on
on column header.
For example, my columns might come into my spreadsheet as
C,B,D,G,A,H,I,F , or as F,B,C,A,D etc.
I want them all sorted say A,B,C,D - the rest of the columns is
irrelevant.

How do I accomplish this ?
TIA

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

What about the sort function Data/Sort prior to xl2007. I recorded a
macro while doing this:

Selection.Sort Key1:=Range("B4"), Order1:=xlAscending,
Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlLeftToRight

Presumably you could loop through all the sheets of interest and run
this code for each. You'd need to determine the size of your data
range in each sheet (or is it always the same?). Post back if this is
close to what you were looking for and I'll develop it a bit further.

Rgds,
Andrew

On Feb 17, 1:34*pm, avi wrote:
Hi,

I need to rearrange columns on many sheets in a certain order based on
on column header.
For example, my columns might come into my spreadsheet as
C,B,D,G,A,H,I,F , or as F,B,C,A,D *etc.
I want them all sorted say A,B,C,D - the rest of the columns is
irrelevant.

How do I accomplish this ?
TIA

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Andrew, note that I just want to reorder columns C, A, B into A, B, C
not to sort data in columns.
There is a similar post on this group - macro "Sub blah()" ; that's
what I want but not on a new sheet but I want to be able to run it
across all the existing sheets.

Antonio

Excel - Macro to rearrange/add columns in all the sheets basedon column header
 

Since i do not know if you have any unique identification of columns,
I'll assume that in first cell (row 1) there are letters for columns...


Sub MoveandCountColumns()
10 For i = 1 To 254 'As 255 is maximum number of columns

If Len(Cells(1, i).Value) = 0 Then Exit For 'This is end of columns

If Columns(Cells(1, i).Value).Column < i Then
Columns(Cells(1, i).Value).Select
Selection.Copy
Columns(255).Select
ActiveSheet.Paste

Columns(i).Select
Selection.Copy
Columns(Cells(1, i).Value).Select
ActiveSheet.Paste

Columns(255).Select
Selection.Copy
Columns(i).Select
ActiveSheet.Paste
GoTo 10
End If
Next

I'm usind column 255 as temporary column for data that should be removed.
I'll try to explain... If in first column you have C and in third you
have E then i'll copy E column to column 255 then copy first column to
its right place and then put back column 255 content in first columns...
before macro i had C A E, after i have E X C, what means that i C is in
right place so i start from begin again until all columns are in right
places.


Here you will need some loops to identify what column on what place you
will need.
If you can provide

On 17.02.2010 14:34, avi wrote:
Hi,

I need to rearrange columns on many sheets in a certain order based on
on column header.
For example, my columns might come into my spreadsheet as
C,B,D,G,A,H,I,F , or as F,B,C,A,D etc.
I want them all sorted say A,B,C,D - the rest of the columns is
irrelevant.

How do I accomplish this ?
TIA

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Hi Monarch,

Since i do not know if you have any unique identification of columns,
I'll assume that in first cell (row 1) there are letters for columns...

Answer to your query is YES. ROW 1 contains unique identification of
columns.
I want to arrange couple of columns across all the sheets in the same
way since I have them now randomly placed across sheets in different
columns. Namely these a "NUM", "SYS", "DIA", "TAG" etc...

Your code works perfectly on one sheet where 1st row (as you said) has
letters but can you help me with this.
TIA

Excel - Macro to rearrange/add columns in all the sheets basedon column header
 

Ok, here is solution

Sub MoveandCountColumnsA()
10 For i = 1 To 254 'As 255 is maximum number of columns

If Len(Cells(1, i).Value) = 0 Then Exit For 'This is end of columns
col = ColumnPlace(Cells(1, i).Value, i)
If col < i Then
Columns(col).Select
Selection.Copy
Columns(255).Select
ActiveSheet.Paste

Columns(i).Select
Selection.Copy
Columns(col).Select
ActiveSheet.Paste

Columns(255).Select
Selection.Copy
Columns(i).Select
ActiveSheet.Paste
GoTo 10
End If
Next

End Sub

and ColumnPlace Function. This function determine what is column
identifier and in which column should it move data.
You can add in CASE what is column header and where you wish it to put
that column.
Do not chage "Case else" part...


Public Function ColumnPlace(ColumnName, CurrColumn)
Select Case ColumnName
Case "NUM"
ColumnPlace = 1
Case "SYS"
ColumnPlace = 2
Case "DIA"
ColumnPlace = 3
Case "TAG"
ColumnPlace = 4
Case "VAR2"
ColumnPlace = 5
Case Else
ColumnPlace = CurrColumn
End Select
End Function

This code will move every column on its needed place only if that column
is mentioned in ColumnPlace function

On 17.02.2010 18:24, avi wrote:
Hi Monarch,

I want to arrange couple of columns across all the sheets in the same
way since I have them now randomly placed across sheets in different
columns. Namely these a "NUM", "SYS", "DIA", "TAG" etc...

Your code works perfectly on one sheet where 1st row (as you said) has
letters but can you help me with this.
TIA

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Hi,

While I was waiting on a reply, I modified the code found on
http://www.pcreview.co.uk/forums/thread-2587219.php
in such way that I am pasting copied columns from clipboard by
inserting it to the left of the first column (A).
It also works but I can't manage to run it across all the sheets in
workbook.
Note: there is a limitation in my code (as far I can see) that first
column in all the sheets needs to have the same header. Otherwise, if
the first column is to be pasted on the left of it - there's error. (I
don't have code with me now, but will post it next week when I am back
at work. Basically it is very close to the code on the link above )...
Luckily, all my sheets start with the same header in column A so I am
able to arrange it.

The code you posted ( thanx very much for it ) works perfectly on one
sheet.
However there is also limitation that there shall be no blank column
between columns of interest ie if there is blank on between, say "NUM"
& "SYS" nothing happens.
Also, please note that I wanted to run it across all the sheets in a
workbook.

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Well there is also another option as advised by Ax on Dbforums to use
Data|Sort, Options and Under Orientation, select "Sort left to
right".
The only thing needed here is Custom List that defines desired columns
order. (see below OrderCustom:=6)

----------------------
Sub Macro1()
Cells.Select
Selection.Sort Key1:=Range("A1"), Order1:=xlAscending,
Header:=xlGuess, _
OrderCustom:=6, MatchCase:=False, Orientation:=xlLeftToRight,
_
DataOption1:=xlSortNormal
End Sub
----------------------

If only I could run this for all the sheets, it is then solved...

Excel - Macro to rearrange/add columns in all the sheets basedon column header
 

here is complete solution
Does not stop on blank cell (it stops if there are 3 (userdefined) blank
cell in a row)
If works on all sheets in a workbook
Custom list can be arranged in ColumnPlace function (just insert new
case line with whatever content of column and desired place of column

here is code:

Sub MoveandCountColumnsA()

Static CountBlanks
'Next two lines cycle thru worksheets
For Each a In Worksheets
a.Activate

10 For i = 1 To 254 'As 255 is maximum number of columns

If Len(Cells(1, i).Value) = 0 Then
CountBlanks = CountBlanks + 1
'If there is 3 columns in a row that was blank assume last column
If CountBlanks 3 Then
'3 blanks in a row, assume we are over last column
Exit For
End If
Else
'Reset counter if there is only 1 or 2 blank cells
CountBlanks = 0
End If
col = ColumnPlace(Cells(1, i).Value, i)
If col < i Then
Columns(col).Select
Selection.Copy
Columns(255).Select
ActiveSheet.Paste

Columns(i).Select
Selection.Copy
Columns(col).Select
ActiveSheet.Paste

Columns(255).Select
Selection.Copy
Columns(i).Select
ActiveSheet.Paste
GoTo 10
End If
Next
Next

End Sub

Public Function ColumnPlace(ColumnName, CurrColumn)
Select Case ColumnName
Case "NUM" 'Put here content of first cell of column
ColumnPlace = 1 'Put here desired place of column
Case "SYS"
ColumnPlace = 2
Case "DIA"
ColumnPlace = 3
Case "TAG"
ColumnPlace = 7
Case "VAR2"
ColumnPlace = 5
Case Else
ColumnPlace = CurrColumn
End Select
End Function

And avi, you are welcome, if there is anything you would like me to
change, just ask :)

On 18.02.2010 19:29, avi wrote:

Hi,

While I was waiting on a reply, I modified the code found on
http://www.pcreview.co.uk/forums/thread-2587219.php
in such way that I am pasting copied columns from clipboard by
inserting it to the left of the first column (A).
It also works but I can't manage to run it across all the sheets in
workbook.
Note: there is a limitation in my code (as far I can see) that first
column in all the sheets needs to have the same header. Otherwise, if
the first column is to be pasted on the left of it - there's error. (I
don't have code with me now, but will post it next week when I am back
at work. Basically it is very close to the code on the link above )...
Luckily, all my sheets start with the same header in column A so I am
able to arrange it.

The code you posted ( thanx very much for it ) works perfectly on one
sheet.
However there is also limitation that there shall be no blank column
between columns of interest ie if there is blank on between, say "NUM"
& "SYS" nothing happens.
Also, please note that I wanted to run it across all the sheets in a
workbook.

Excel - Macro to rearrange/add columns in all the sheets based oncolumn header
 

Well, all I can say: Thanx very much Monarch!
Finally I can rearrange it now... :-)