ExcelBanter

ExcelBanter (https://www.excelbanter.com/)
-   Excel Programming (https://www.excelbanter.com/excel-programming/)
-   -   Help! Combine Macros (https://www.excelbanter.com/excel-programming/427573-help-combine-macros.html)

LiAD
Help! Combine Macros
 
Hi,

I have two codes, (attached below) that I need to enter on the workbook.
The first code is to hide all the menus, toolbars etc. The second item is to
close the file if it stays inactive for 5 minutes.

First question - is it possible to change the file close macro so it closes
excel and the file rather than just the file?

Secondly I can get both of these to run independently but not at the same
time in the same folder. Could some-one help me to either rewrite the code
or tell me how to get them both to run?

Thanks a million!
-----------------------------------------------------------------
Code 1 - menu and toolbar hide

Private mFormulaBar

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB

Application.DisplayFormulaBar = mFormulaBar
End Sub

Private Sub Workbook_Open()
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB

mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False
End Sub

-------------------------------------------------------------------------
Code 2 - file close after 5 minutes of inactivity

Public RunWhen As Double
Public Const NUM_MINUTES = 10

Public Sub SaveAndClose()
ThisWorkbook.Close savechanges:=True
End Sub

Private Sub Workbook_Open()
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
Application.OnKey "%{F11}", "dummy"

End Sub

Private Sub Workbook_BeforeClose(Cancel As Boolean)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
End Sub

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, _
ByVal Target As Range)

On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True

End Sub

Bob Phillips[_3_]
Help! Combine Macros
 
Private mFormulaBar

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB

Application.DisplayFormulaBar = mFormulaBar

Application.Quit
End Sub

Private Sub Workbook_Open()
Dim oCB As CommandBar
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0

Application.OnKey "%{F11}", "dummy"

For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB

mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False

RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

-------------------------------------------------------------------------
Code 2 - file close after 5 minutes of inactivity

Public RunWhen As Double
Public Const NUM_MINUTES = 10

Public Sub SaveAndClose()
ThisWorkbook.Close savechanges:=True
End Sub

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, _
ByVal Target As Range)

On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True

End Sub

--
__________________________________
HTH

Bob

"LiAD" wrote in message
...
Hi,

I have two codes, (attached below) that I need to enter on the workbook.
The first code is to hide all the menus, toolbars etc. The second item is
to
close the file if it stays inactive for 5 minutes.

First question - is it possible to change the file close macro so it
closes
excel and the file rather than just the file?

Secondly I can get both of these to run independently but not at the same
time in the same folder. Could some-one help me to either rewrite the
code
or tell me how to get them both to run?

Thanks a million!
-----------------------------------------------------------------
Code 1 - menu and toolbar hide

Private mFormulaBar

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB

Application.DisplayFormulaBar = mFormulaBar
End Sub

Private Sub Workbook_Open()
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB

mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False
End Sub

-------------------------------------------------------------------------
Code 2 - file close after 5 minutes of inactivity

Public RunWhen As Double
Public Const NUM_MINUTES = 10

Public Sub SaveAndClose()
ThisWorkbook.Close savechanges:=True
End Sub

Private Sub Workbook_Open()
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
Application.OnKey "%{F11}", "dummy"

End Sub

Private Sub Workbook_BeforeClose(Cancel As Boolean)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
End Sub

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As
Range)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, _
ByVal Target As Range)

On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True

End Sub

LiAD
Help! Combine Macros
 
Thanks a lot ...... again!

"Bob Phillips" wrote:

Private mFormulaBar

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB

Application.DisplayFormulaBar = mFormulaBar

Application.Quit
End Sub

Private Sub Workbook_Open()
Dim oCB As CommandBar
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0

Application.OnKey "%{F11}", "dummy"

For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB

mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False

RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

-------------------------------------------------------------------------
Code 2 - file close after 5 minutes of inactivity

Public RunWhen As Double
Public Const NUM_MINUTES = 10

Public Sub SaveAndClose()
ThisWorkbook.Close savechanges:=True
End Sub

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, _
ByVal Target As Range)

On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True

End Sub

--
__________________________________
HTH

Bob

"LiAD" wrote in message
...
Hi,

I have two codes, (attached below) that I need to enter on the workbook.
The first code is to hide all the menus, toolbars etc. The second item is
to
close the file if it stays inactive for 5 minutes.

First question - is it possible to change the file close macro so it
closes
excel and the file rather than just the file?

Secondly I can get both of these to run independently but not at the same
time in the same folder. Could some-one help me to either rewrite the
code
or tell me how to get them both to run?

Thanks a million!
-----------------------------------------------------------------
Code 1 - menu and toolbar hide

Private mFormulaBar

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = True
Next oCB

Application.DisplayFormulaBar = mFormulaBar
End Sub

Private Sub Workbook_Open()
Dim oCB As CommandBar
For Each oCB In Application.CommandBars
oCB.Enabled = False
Next oCB

mFormulaBar = Application.DisplayFormulaBar
Application.DisplayFormulaBar = False
End Sub

-------------------------------------------------------------------------
Code 2 - file close after 5 minutes of inactivity

Public RunWhen As Double
Public Const NUM_MINUTES = 10

Public Sub SaveAndClose()
ThisWorkbook.Close savechanges:=True
End Sub

Private Sub Workbook_Open()
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
Application.OnKey "%{F11}", "dummy"

End Sub

Private Sub Workbook_BeforeClose(Cancel As Boolean)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
End Sub

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As
Range)
On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True
End Sub

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, _
ByVal Target As Range)

On Error Resume Next
Application.OnTime RunWhen, "SaveAndClose", , False
On Error GoTo 0
RunWhen = Now + TimeSerial(0, NUM_MINUTES, 0)
Application.OnTime RunWhen, "SaveAndClose", , True

End Sub


All times are GMT +1. The time now is 02:38 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ExcelBanter.com