ExcelBanter - Update "centerheader" code running slowly need help speeding up

ExcelBanter (https://www.excelbanter.com/)

- Excel Programming (https://www.excelbanter.com/excel-programming/)

- - Update "centerheader" code running slowly need help speeding up (https://www.excelbanter.com/excel-programming/422424-update-centerheader-code-running-slowly-need-help-speeding-up.html)

Breck

Update "centerheader" code running slowly need help speeding up

I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

'In case sheets are grouped
Sheet4.Select

On Error GoTo Ungroup

'To Unprotect this sheet if protected
If Me.ProtectContents = True Then
ActiveSheet.Select
ActiveSheet.Unprotect
Else
End If

'This updates the sheet print header
PageSetup.CenterHeader = Range("A1").Value <======== This is the
new line of code that slows everything down

'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
With ActiveSheet
If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
End If
If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
End If
If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
End If
If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
End If
If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
End If
If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
End If
If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
End If
If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
End If
If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
End If
End With

Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

If Me.ProtectContents = False Then
ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
'MsgBox "Protected"
Else
ActiveSheet.Unprotect
'MsgBox "Un Protected"
End If
'Also see below
'Me.ProtectDrawingObjects

On Error GoTo 0

'The macro is done. Use Exit sub, otherwise the macro
'execution WILL continue into the error handler
Exit Sub

Ungroup:
MsgBox "Please ungroup sheets"

End Sub

Jon Peltier

Update "centerheader" code running slowly need help speeding up

Here are a couple of pages that show how to use an ancient technology called
XLM (XL Macro programming language) that does page setup like lightning:

http://groups.google.com/group/micro...y&rnum=2&pli=1

http://www.eggheadcafe.com/forumarch...st23283696.asp

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.
http://PeltierTech.com/WordPress/
_______

http://www.vbaexpress.com/kb/getarticle.php?kb_id=750

"Breck" wrote in message
...
I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

'In case sheets are grouped
Sheet4.Select

On Error GoTo Ungroup

'To Unprotect this sheet if protected
If Me.ProtectContents = True Then
ActiveSheet.Select
ActiveSheet.Unprotect
Else
End If

'This updates the sheet print header
PageSetup.CenterHeader = Range("A1").Value <======== This is the
new line of code that slows everything down

'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
With ActiveSheet
If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
End If
If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
End If
If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
End If
If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
End If
If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
End If
If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
End If
If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
End If
If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
End If
If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
End If
End With

Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

If Me.ProtectContents = False Then
ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
'MsgBox "Protected"
Else
ActiveSheet.Unprotect
'MsgBox "Un Protected"
End If
'Also see below
'Me.ProtectDrawingObjects

On Error GoTo 0

'The macro is done. Use Exit sub, otherwise the macro
'execution WILL continue into the error handler
Exit Sub

Ungroup:
MsgBox "Please ungroup sheets"

End Sub

Breck

Update "centerheader" code running slowly need help speeding up

I'll give it a try but I'm new at this and don't know how to program
yet. I found most of the code posted somewhere else and adapted it to
my needs. I hope that I can figure it out.

On Jan 13, 10:15*pm, "Jon Peltier"
wrote:
Here are a couple of pages that show how to use an ancient technology called
XLM (XL Macro programming language) that does page setup like lightning:

http://groups.google.com/group/micro...rogramming/bro...

http://www.eggheadcafe.com/forumarch...Jun2005/post23...

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.http://PeltierTech.com/WordPress/
_______

http://www.vbaexpress.com/kb/getarticle.php?kb_id=750

"Breck" wrote in message

...

I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts *is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

* *'In case sheets are grouped
* *Sheet4.Select

* *On Error GoTo Ungroup

* *'To Unprotect this sheet if protected
* *If Me.ProtectContents = True Then
* * * *ActiveSheet.Select
* * * *ActiveSheet.Unprotect
* * * *Else
* *End If

* *'This updates the sheet print header
* *PageSetup.CenterHeader = Range("A1").Value * <======== This is the
new line of code that slows * * * * * * *everything down

* *'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
* *With ActiveSheet
* * * *If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
* * * * * *.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
* * * *End If
* * * *If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
* * * * * *.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
* * * *End If
* * * *If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
* * * * * *.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
* * * *End If
* * * *If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
* * * * * *.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
* * * *End If
* * * *If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
* * * * * *.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
* * * *End If
* * * *If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
* * * * * *.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
* * * *End If
* * * *If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
* * * * * *.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
* * * *End If
* * * *If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
* * * * * *.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
* * * *End If
* * * *If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
* * * * * *.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
* * * *End If
* *End With

* *Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

* * * *If Me.ProtectContents = False Then
* * * *ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
* * * *'MsgBox "Protected"
* * * *Else
* * * *ActiveSheet.Unprotect
* * * *'MsgBox "Un Protected"
* *End If
* *'Also see below
* *'Me.ProtectDrawingObjects

* *On Error GoTo 0

* *'The macro is done. Use Exit sub, otherwise the macro
* *'execution WILL continue into the error handler
* * Exit Sub

Ungroup:
* *MsgBox "Please ungroup sheets"

End Sub

Breck

Update "centerheader" code running slowly need help speeding up

It works sort of. I copied the code from the first link and the pause
is down to what it was before adding the new code. I tried to add a
range name where the text "My Company" and "Highly Confidential and
Proprietary" but it didn't work. I can't figure out what changes need
to be made to change the text to a range name. I would also like to
change the font size but adding "&28 " before the "My Company" also
resulted in an error. Can anyone help.

head = """&LMy Company&R&D / &T"""
foot = """&LHighly Confidential and Proprietary&RFinance"""

On Jan 13, 10:15*pm, "Jon Peltier"
wrote:
Here are a couple of pages that show how to use an ancient technology called
XLM (XL Macro programming language) that does page setup like lightning:

http://groups.google.com/group/micro...rogramming/bro...

http://www.eggheadcafe.com/forumarch...Jun2005/post23...

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.http://PeltierTech.com/WordPress/
_______

http://www.vbaexpress.com/kb/getarticle.php?kb_id=750

"Breck" wrote in message

...

I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts *is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

* *'In case sheets are grouped
* *Sheet4.Select

* *On Error GoTo Ungroup

* *'To Unprotect this sheet if protected
* *If Me.ProtectContents = True Then
* * * *ActiveSheet.Select
* * * *ActiveSheet.Unprotect
* * * *Else
* *End If

* *'This updates the sheet print header
* *PageSetup.CenterHeader = Range("A1").Value * <======== This is the
new line of code that slows * * * * * * *everything down

* *'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
* *With ActiveSheet
* * * *If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
* * * * * *.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
* * * *End If
* * * *If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
* * * * * *.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
* * * *End If
* * * *If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
* * * * * *.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
* * * *End If
* * * *If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
* * * * * *.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
* * * *End If
* * * *If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
* * * * * *.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
* * * *End If
* * * *If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
* * * * * *.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
* * * *End If
* * * *If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
* * * * * *.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
* * * *End If
* * * *If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
* * * * * *.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
* * * *End If
* * * *If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
* * * * * *.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
* * * *End If
* *End With

* *Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

* * * *If Me.ProtectContents = False Then
* * * *ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
* * * *'MsgBox "Protected"
* * * *Else
* * * *ActiveSheet.Unprotect
* * * *'MsgBox "Un Protected"
* *End If
* *'Also see below
* *'Me.ProtectDrawingObjects

* *On Error GoTo 0

* *'The macro is done. Use Exit sub, otherwise the macro
* *'execution WILL continue into the error handler
* * Exit Sub

Ungroup:
* *MsgBox "Please ungroup sheets"

End Sub

Breck

Update "centerheader" code running slowly need help speeding up

Breck

Update "centerheader" code running slowly need help speeding up

Jon Peltier

Update "centerheader" code running slowly need help speeding up

head = """&Lsomething&Csomething&Rsomething"""

I think you need each escape code even if the relevant something is "". If
you want to say "My Company R&D" you have to enter it as "My Company R&&D".
If the command works without &28, it will work with it. Start simple and
build it up piece by piece, testing each piece until it works. To send text
from a cell somewhere, put the text into a variable and concatenate the
variable:

head = """&Lsomething&C" & sInsertedText & "&Rsomething"""

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.
http://PeltierTech.com/WordPress/
_______

"Breck" wrote in message
...
It works sort of. I copied the code from the first link and the pause
is down to what it was before adding the new code. I tried to add a
range name where the text "My Company" and "Highly Confidential and
Proprietary" but it didn't work. I can't figure out what changes need
to be made to change the text to a range name. I would also like to
change the font size but adding "&28 " before the "My Company" also
resulted in an error. Can anyone help.

head = """&LMy Company&R&D / &T"""
foot = """&LHighly Confidential and Proprietary&RFinance"""

On Jan 13, 10:15 pm, "Jon Peltier"
wrote:
Here are a couple of pages that show how to use an ancient technology
called
XLM (XL Macro programming language) that does page setup like lightning:

http://groups.google.com/group/micro...rogramming/bro...

http://www.eggheadcafe.com/forumarch...Jun2005/post23...

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.http://PeltierTech.com/WordPress/
_______

http://www.vbaexpress.com/kb/getarticle.php?kb_id=750

"Breck" wrote in message

...

I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

'In case sheets are grouped
Sheet4.Select

On Error GoTo Ungroup

'To Unprotect this sheet if protected
If Me.ProtectContents = True Then
ActiveSheet.Select
ActiveSheet.Unprotect
Else
End If

'This updates the sheet print header
PageSetup.CenterHeader = Range("A1").Value <======== This is the
new line of code that slows everything down

'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
With ActiveSheet
If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
End If
If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
End If
If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
End If
If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
End If
If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
End If
If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
End If
If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
End If
If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
End If
If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
End If
End With

Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

If Me.ProtectContents = False Then
ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
'MsgBox "Protected"
Else
ActiveSheet.Unprotect
'MsgBox "Un Protected"
End If
'Also see below
'Me.ProtectDrawingObjects

On Error GoTo 0

'The macro is done. Use Exit sub, otherwise the macro
'execution WILL continue into the error handler
Exit Sub

Ungroup:
MsgBox "Please ungroup sheets"

End Sub

Breck

Update "centerheader" code running slowly need help speeding up

Thanks for you help

"Jon Peltier" wrote in message
...
head = """&Lsomething&Csomething&Rsomething"""

I think you need each escape code even if the relevant something is "". If
you want to say "My Company R&D" you have to enter it as "My Company
R&&D". If the command works without &28, it will work with it. Start
simple and build it up piece by piece, testing each piece until it works.
To send text from a cell somewhere, put the text into a variable and
concatenate the variable:

head = """&Lsomething&C" & sInsertedText & "&Rsomething"""

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.
http://PeltierTech.com/WordPress/
_______

"Breck" wrote in message
...
It works sort of. I copied the code from the first link and the pause
is down to what it was before adding the new code. I tried to add a
range name where the text "My Company" and "Highly Confidential and
Proprietary" but it didn't work. I can't figure out what changes need
to be made to change the text to a range name. I would also like to
change the font size but adding "&28 " before the "My Company" also
resulted in an error. Can anyone help.

head = """&LMy Company&R&D / &T"""
foot = """&LHighly Confidential and Proprietary&RFinance"""

On Jan 13, 10:15 pm, "Jon Peltier"
wrote:
Here are a couple of pages that show how to use an ancient technology
called
XLM (XL Macro programming language) that does page setup like lightning:

http://groups.google.com/group/micro...rogramming/bro...

http://www.eggheadcafe.com/forumarch...Jun2005/post23...

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services, Inc.http://PeltierTech.com/WordPress/
_______

http://www.vbaexpress.com/kb/getarticle.php?kb_id=750

"Breck" wrote in message

...

I recently added 1 new line of code to the following code I have been
running for a year. Previous to adding the the line of code
"PageSetup.CenterHeader = Range("A1").Value" I would click on a sheet
and there would be a slight almost unnoticable pause while the code
executed. After adding the above code there is now a 5 to 8 second
pause after clicking on the sheet. This pause is the same whether Calc
is on or off.

Is it just the nature of that new line of code or is there a way of
tweaking my code so it executes faster. I have 32 sheets with the same
code for each sheet. The entire Excel 2007 spreadsheet is 7MB
compress. It it was saved in Excel 2003 the file size would approach
20MB so it is a very large file.

What I'm trying to achieve is to make sure that the "crosses at" value
on 9 different charts is updated with the most current value that is
on the same sheet. This is the part that is working fine. I wanted to
update each of the sheets Header with data that is entered in another
location also. That is the additional code that causing the 5-8 second
delay. I also tried code that would update the header of every sheet
after the desired text is entered on a sheet but that code took 5-10
minuted to run so I tried the individual sheet approach hoping that
would run faster.

Private Sub worksheet_activate()
Application.ScreenUpdating = False

'In case sheets are grouped
Sheet4.Select

On Error GoTo Ungroup

'To Unprotect this sheet if protected
If Me.ProtectContents = True Then
ActiveSheet.Select
ActiveSheet.Unprotect
Else
End If

'This updates the sheet print header
PageSetup.CenterHeader = Range("A1").Value <======== This is the
new line of code that slows everything down

'To Update the Charts CrossesAt value from setup sheet that are on
the sheet
With ActiveSheet
If .ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
< .Range("J20") Then
.ChartObjects("Chart 1").Chart.Axes(xlValue).CrossesAt
= .Range("J20")
End If
If .ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
< .Range("K20") Then
.ChartObjects("Chart 2").Chart.Axes(xlValue).CrossesAt
= .Range("K20")
End If
If .ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
< .Range("L20") Then
.ChartObjects("Chart 3").Chart.Axes(xlValue).CrossesAt
= .Range("L20")
End If
If .ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
< .Range("Q20") Then
.ChartObjects("Chart 4").Chart.Axes(xlValue).CrossesAt
= .Range("Q20")
End If
If .ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
< .Range("R20") Then
.ChartObjects("Chart 5").Chart.Axes(xlValue).CrossesAt
= .Range("R20")
End If
If .ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
< .Range("S20") Then
.ChartObjects("Chart 6").Chart.Axes(xlValue).CrossesAt
= .Range("S20")
End If
If .ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
< .Range("T20") Then
.ChartObjects("Chart 7").Chart.Axes(xlValue).CrossesAt
= .Range("T20")
End If
If .ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
< .Range("AA65") Then
.ChartObjects("Chart 8").Chart.Axes(xlValue).CrossesAt
= .Range("AA65")
End If
If .ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
< .Range("AB65") Then
.ChartObjects("Chart 9").Chart.Axes(xlValue).CrossesAt
= .Range("AB65")
End If
End With

Range("AI1:AI262").AutoFilter Field:=1, Criteria1:="<0"

If Me.ProtectContents = False Then
ActiveSheet.Protect DrawingObjects:=True, Contents:=True,
Scenarios:=True, AllowFormattingColumns:=True, AllowFiltering:=True
'MsgBox "Protected"
Else
ActiveSheet.Unprotect
'MsgBox "Un Protected"
End If
'Also see below
'Me.ProtectDrawingObjects

On Error GoTo 0

'The macro is done. Use Exit sub, otherwise the macro
'execution WILL continue into the error handler
Exit Sub

Ungroup:
MsgBox "Please ungroup sheets"

End Sub

All times are GMT +1. The time now is 06:36 PM.