| Home |
| Search |
| Today's Posts |
|
#1
Posted to microsoft.public.excel.programming
|
|||
|
|||
Code in 2003 not working in 2007
Below is part of my code from a macro that worked fine in 2003, but does not
work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#2
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
I'm guessing this isn't the only inconsistency you'll find between 2003 and
2007. If I were you, I'd record a small macro in 2007 to do the same thing and change your code accordingly. -- HTH, Barb Reinhardt "GregK" wrote: Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#3
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
Interestingly enough, it does the same thing. When I filter and select the
range and change the color it still captures all the cells that I filtered out. "Barb Reinhardt" wrote: I'm guessing this isn't the only inconsistency you'll find between 2003 and 2007. If I were you, I'd record a small macro in 2007 to do the same thing and change your code accordingly. -- HTH, Barb Reinhardt "GregK" wrote: Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#4
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
It seems to work for me in 2007. In what way do you feel that it is not
working? -- __________________________________ HTH Bob "GregK" wrote in message ... Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#5
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
When I run it in 2007, all of the cells within the range a6:ac3610 filtered
or not turn to orange. When I run the code in 2003, only the cells that are visible through the autofilter in range a6:a3610 turn orange. "Bob Phillips" wrote: It seems to work for me in 2007. In what way do you feel that it is not working? -- __________________________________ HTH Bob "GregK" wrote in message ... Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#6
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
How can you tell if they are not visible?
-- __________________________________ HTH Bob "GregK" wrote in message ... When I run it in 2007, all of the cells within the range a6:ac3610 filtered or not turn to orange. When I run the code in 2003, only the cells that are visible through the autofilter in range a6:a3610 turn orange. "Bob Phillips" wrote: It seems to work for me in 2007. In what way do you feel that it is not working? -- __________________________________ HTH Bob "GregK" wrote in message ... Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#7
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
I can tell once I unfilter the selection.
"Bob Phillips" wrote: How can you tell if they are not visible? -- __________________________________ HTH Bob "GregK" wrote in message ... When I run it in 2007, all of the cells within the range a6:ac3610 filtered or not turn to orange. When I run the code in 2003, only the cells that are visible through the autofilter in range a6:a3610 turn orange. "Bob Phillips" wrote: It seems to work for me in 2007. In what way do you feel that it is not working? -- __________________________________ HTH Bob "GregK" wrote in message ... Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#8
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
Anyone have any ideas why this is working differently in 2007? I thought I
came across an early thread that mentioned something about 2007 handeling "with selection" differently than previous versions? "GregK" wrote: I can tell once I unfilter the selection. "Bob Phillips" wrote: How can you tell if they are not visible? -- __________________________________ HTH Bob "GregK" wrote in message ... When I run it in 2007, all of the cells within the range a6:ac3610 filtered or not turn to orange. When I run the code in 2003, only the cells that are visible through the autofilter in range a6:a3610 turn orange. "Bob Phillips" wrote: It seems to work for me in 2007. In what way do you feel that it is not working? -- __________________________________ HTH Bob "GregK" wrote in message ... Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#9
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
Well, I figured it out on my own. I had to change
With Selection.Interior to With Range("A6:ac3610").Interior It now will only color the cells within that range that visible through the autofilter. How can I get to only color the table has a variable range of visibile cells? For example, the table usually ends around 2000 rows, but I added the extra beef of 3610 to be safe. I want to only select what's in the autofitler and always leave out the headers (row 6). "GregK" wrote: Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
|
#10
Posted to microsoft.public.excel.programming
|
|||
|
|||
|
Code in 2003 not working in 2007
The proper way to do it is to create a range variable that identifies the
data table range, filter that, set a new range variable to the visible rows, and work upon that. -- __________________________________ HTH Bob "GregK" wrote in message ... Well, I figured it out on my own. I had to change With Selection.Interior to With Range("A6:ac3610").Interior It now will only color the cells within that range that visible through the autofilter. How can I get to only color the table has a variable range of visibile cells? For example, the table usually ends around 2000 rows, but I added the extra beef of 3610 to be safe. I want to only select what's in the autofitler and always leave out the headers (row 6). "GregK" wrote: Below is part of my code from a macro that worked fine in 2003, but does not work the same in 2007. In 2003, the code would filter a certain field and change the interior cell color of only the visibile cells with in the selection. In 2007, it changes the color of all the cells with in the range specified (A6:AC3610). Why is this different in 2007 and how do I correct it. Any help is greatly appreciated. Thanks. Range("A6:ac3610").Select Selection.FormatConditions.Delete Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6=1.1,$aa60))" Selection.FormatConditions(1).Font.ColorIndex = 50 Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _ "=IF($A6<"""",IF($G6=2,$aa6<2,$aa6<1))" Selection.FormatConditions(2).Interior.ColorIndex = 3 ' Filters spread sheet Selection.AutoFilter Field:=27, Criteria1:="<1.1", Operator:=xlAnd ' Changes color on visible cells within my range With Selection.Interior .ColorIndex = 45 .Pattern = xlSolid End With |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Charts from 2003 not working in 2007 | Excel Discussion (Misc queries) | |||
| 2003--2007 recognize if i'm in 2007 or 2003 via code. | Excel Programming | |||
| 2007 code not working in 2003 | Excel Programming | |||
| Working Between Excell 2003 & 2007 | Excel Worksheet Functions | |||
| Formulas in 2007 not working in 2003 | Excel Worksheet Functions | |||
Linear Mode
