re-post
 

Hi, all:

Not know why my posts are not shown up. Another same post:

I manually highlight a cell or cells with green color. Whenever I do
so, I want to return a value 1 in another cell in the same row.
Otherwise, that value will be 0. How to achive this?

Thanks,

Jorge

re-post
 

if you're using google groups, yesterday & today it's not updating.
:(
it's slowly catching up..... right now it's 1:32 pm & i'm showing the latest
posts are 11am. which is better than it was yesterday.
(reading this via OE)
susan


wrote in message
ups.com...
Hi, all:

Not know why my posts are not shown up. Another same post:

I manually highlight a cell or cells with green color. Whenever I do
so, I want to return a value 1 in another cell in the same row.
Otherwise, that value will be 0. How to achive this?

Thanks,

Jorge

re-post
 

This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

re-post
 

On May 17, 12:44 pm, Gary''s Student
wrote:
This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

Susan and Gary:

Thank you so much for your input!

Maybe my question is not clear. Please allow me to re-instate it.

I have two columns, say column C and D with unlimited rows. The text
or quantity starts in each row either from column C or Column D, but
not both. I will need to highlight the starting cell with green to
indicate that I need this row. Here is an example:

If I highlight C23 as green, I would like to return a value of 1 in
cell F23,
If I highlight C25 as green, I would like to return a value of 1 in
cell F25,
If I highlight D28 as green, I would like to return a value of 1 in
cell F28, etc.

Anyway, any cell under column F must be 1 or 0 depending on the cell
color under Column C OR Column D (not both) in the SAME ROW. Please
note that I can randomly add some new rows in the middle of the
worksheet. Those new rows will follow the same rules.

Any thoughts?

Thanks,

Jorge

re-post
 

On May 17, 1:52 pm, "
wrote:
On May 17, 12:44 pm, Gary''s Student





wrote:
This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

Susan and Gary:

Thank you so much for your input!

Maybe my question is not clear. Please allow me to re-instate it.

I have two columns, say column C and D with unlimited rows. The text
or quantity starts in each row either from column C or Column D, but
not both. I will need to highlight the starting cell with green to
indicate that I need this row. Here is an example:

If I highlight C23 as green, I would like to return a value of 1 in
cell F23,
If I highlight C25 as green, I would like to return a value of 1 in
cell F25,
If I highlight D28 as green, I would like to return a value of 1 in
cell F28, etc.

Anyway, any cell under column F must be 1 or 0 depending on the cell
color under Column C OR Column D (not both) in the SAME ROW. Please
note that I can randomly add some new rows in the middle of the
worksheet. Those new rows will follow the same rules.

Any thoughts?

Thanks,

Jorge- Hide quoted text -

- Show quoted text -

Hi, Gary:

I modified your code to the following. Apparently, it is not working.
Please advise!

Thanks,


Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim i As Integer

Range(i, 6).Value = 0
For i = 1 To Rows.Count
If Cells(i, 3).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1
Else
If Cells(i, 4).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1

Exit Sub
End If
End If
Next i
End Sub

re-post
 

Are you sure the shade of green you are using is ColorIndex 10? Or is it
4, 14 or 43? You have to match the number to the color you use. When you
select the color from the palette, count the number of color swatches from
left to
right and down.

" wrote:

On May 17, 1:52 pm, "
wrote:
On May 17, 12:44 pm, Gary''s Student





wrote:
This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

Susan and Gary:

Thank you so much for your input!

Maybe my question is not clear. Please allow me to re-instate it.

I have two columns, say column C and D with unlimited rows. The text
or quantity starts in each row either from column C or Column D, but
not both. I will need to highlight the starting cell with green to
indicate that I need this row. Here is an example:

If I highlight C23 as green, I would like to return a value of 1 in
cell F23,
If I highlight C25 as green, I would like to return a value of 1 in
cell F25,
If I highlight D28 as green, I would like to return a value of 1 in
cell F28, etc.

Anyway, any cell under column F must be 1 or 0 depending on the cell
color under Column C OR Column D (not both) in the SAME ROW. Please
note that I can randomly add some new rows in the middle of the
worksheet. Those new rows will follow the same rules.

Any thoughts?

Thanks,

Jorge- Hide quoted text -

- Show quoted text -

Hi, Gary:

I modified your code to the following. Apparently, it is not working.
Please advise!

Thanks,


Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim i As Integer

Range(i, 6).Value = 0
For i = 1 To Rows.Count
If Cells(i, 3).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1
Else
If Cells(i, 4).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1

Exit Sub
End If
End If
Next i
End Sub

re-post
 

On May 17, 6:31 pm, JLGWhiz wrote:
Are you sure the shade of green you are using is ColorIndex 10? Or is it
4, 14 or 43? You have to match the number to the color you use. When you
select the color from the palette, count the number of color swatches from
left to
right and down.



" wrote:
On May 17, 1:52 pm, "
wrote:
On May 17, 12:44 pm, Gary''s Student

wrote:
This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

Susan and Gary:

Thank you so much for your input!

Maybe my question is not clear. Please allow me to re-instate it.

I have two columns, say column C and D with unlimited rows. The text
or quantity starts in each row either from column C or Column D, but
not both. I will need to highlight the starting cell with green to
indicate that I need this row. Here is an example:

If I highlight C23 as green, I would like to return a value of 1 in
cell F23,
If I highlight C25 as green, I would like to return a value of 1 in
cell F25,
If I highlight D28 as green, I would like to return a value of 1 in
cell F28, etc.

Anyway, any cell under column F must be 1 or 0 depending on the cell
color under Column C OR Column D (not both) in the SAME ROW. Please
note that I can randomly add some new rows in the middle of the
worksheet. Those new rows will follow the same rules.

Any thoughts?

Thanks,

Jorge- Hide quoted text -

- Show quoted text -

Hi, Gary:

I modified your code to the following. Apparently, it is not working.
Please advise!

Thanks,

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim i As Integer

Range(i, 6).Value = 0
For i = 1 To Rows.Count
If Cells(i, 3).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1
Else
If Cells(i, 4).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1

Exit Sub
End If
End If
Next i
End Sub- Hide quoted text -

- Show quoted text -

Yes, I am sure the color index is 10.

thanks,

re-post
 

On May 17, 7:16 pm, "
wrote:
On May 17, 6:31 pm, JLGWhiz wrote:





Are you sure the shade of green you are using is ColorIndex 10? Or is it
4, 14 or 43? You have to match the number to the color you use. When you
select the color from the palette, count the number of color swatches from
left to
right and down.

" wrote:
On May 17, 1:52 pm, "
wrote:
On May 17, 12:44 pm, Gary''s Student

wrote:
This is a sample for row 7. The value goes in A7. The color tested for is
green #10:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A7").Value = 0
For i = 1 To Columns.Count
If Cells(7, i).Interior.ColorIndex = 10 Then
Range("A7").Value = 1
Exit Sub
End If
Next
End Sub

This goes in the Worksheet code area not a standard module. Once you have
colored a cell, move away from it to tell the routine you are done.
--
Gary''s Student - gsnu200722

Susan and Gary:

Thank you so much for your input!

Maybe my question is not clear. Please allow me to re-instate it.

I have two columns, say column C and D with unlimited rows. The text
or quantity starts in each row either from column C or Column D, but
not both. I will need to highlight the starting cell with green to
indicate that I need this row. Here is an example:

If I highlight C23 as green, I would like to return a value of 1 in
cell F23,
If I highlight C25 as green, I would like to return a value of 1 in
cell F25,
If I highlight D28 as green, I would like to return a value of 1 in
cell F28, etc.

Anyway, any cell under column F must be 1 or 0 depending on the cell
color under Column C OR Column D (not both) in the SAME ROW. Please
note that I can randomly add some new rows in the middle of the
worksheet. Those new rows will follow the same rules.

Any thoughts?

Thanks,

Jorge- Hide quoted text -

- Show quoted text -

Hi, Gary:

I modified your code to the following. Apparently, it is not working.
Please advise!

Thanks,

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim i As Integer

Range(i, 6).Value = 0
For i = 1 To Rows.Count
If Cells(i, 3).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1
Else
If Cells(i, 4).Interior.ColorIndex = 10 Then
Range(i, 6).Value = 1

Exit Sub
End If
End If
Next i
End Sub- Hide quoted text -

- Show quoted text -

Yes, I am sure the color index is 10.

thanks,- Hide quoted text -

- Show quoted text -

Hi,

Anybody has any ideas?

Thanks,