VB from excel03 not working in 07
 

I just upgraded to office 07 and have found an eror in some of my VB relating
to naming buttons on my sheet. Here is the actual code that used to work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object does
not support this property or method. I am trying to first of all, check to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text "Selected" if
it does, I want to msgbox the user to click on another button. If it doesn't
have that text, I then want to run the "else" section which will re text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have also
trusted the location of this file.

VB from excel03 not working in 07
 

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB relating
to naming buttons on my sheet. Here is the actual code that used to work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object does
not support this property or method. I am trying to first of all, check to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text "Selected" if
it does, I want to msgbox the user to click on another button. If it doesn't
have that text, I then want to run the "else" section which will re text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have also
trusted the location of this file.

VB from excel03 not working in 07
 

The error I got said " this oblect does not support this property or method"
I will do the best debugging I can and see what I can figure out.
I guess my main thought is, why has office changed so mush that older code
will no longer work? Shouldn't everything new be backwards compatible? I'll
let you know what I find out. Thanks for the response.

"Tom Ogilvy" wrote:

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB relating
to naming buttons on my sheet. Here is the actual code that used to work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object does
not support this property or method. I am trying to first of all, check to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text "Selected" if
it does, I want to msgbox the user to click on another button. If it doesn't
have that text, I then want to run the "else" section which will re text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have also
trusted the location of this file.

VB from excel03 not working in 07
 

Here's what I found so far. In the statement: ActiveSheet.Shapes(Col -
5).Select, Col - 5 is not working. I tried just putting in the number 1, same
thing, then I tried "1". This worked. Looks like I will have to go through
all my code and change this. The problem is that the code I have has to
manipulate based on the Col value (some statements use the Col as the value
and some add or subtract from it) Any ideas on how to do these manipulations
and then get the resulting value in side the quotes?

"Tom Ogilvy" wrote:

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB relating
to naming buttons on my sheet. Here is the actual code that used to work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object does
not support this property or method. I am trying to first of all, check to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text "Selected" if
it does, I want to msgbox the user to click on another button. If it doesn't
have that text, I then want to run the "else" section which will re text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have also
trusted the location of this file.

VB from excel03 not working in 07
 

shapes(1) is the first shape in the collection

shapes("1") is a shape named "1"

I wouldn't expect any different behavior in any version of excel, but I
don't have xl2007 installed.

this copy from the immediate window demonstrates that behavior in xl97

Selection.Name = "1"
? activesheet.Shapes(1).name
Rectangle 1
? activesheet.Shapes(2).Name
1
? activesheet.Shapes("1").Name
1

You can change a number to text with cstr

? activesheet.Shapes(cstr(1)).Name
1


--
Regards,
Tom Ogilvy



"JCanyoneer" wrote in message
...
Here's what I found so far. In the statement: ActiveSheet.Shapes(Col -
5).Select, Col - 5 is not working. I tried just putting in the number 1,
same
thing, then I tried "1". This worked. Looks like I will have to go through
all my code and change this. The problem is that the code I have has to
manipulate based on the Col value (some statements use the Col as the
value
and some add or subtract from it) Any ideas on how to do these
manipulations
and then get the resulting value in side the quotes?

"Tom Ogilvy" wrote:

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming
problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB
relating
to naming buttons on my sheet. Here is the actual code that used to
work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door
layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an
integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object
does
not support this property or method. I am trying to first of all, check
to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text
"Selected" if
it does, I want to msgbox the user to click on another button. If it
doesn't
have that text, I then want to run the "else" section which will re
text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have
also
trusted the location of this file.

VB from excel03 not working in 07
 

FWIW, I ran across some problems with Forms toolbar buttons in Excel 2007. I
don't remember the details offhand and I don't have 2007 on this computer,
but I remember having to come up with some workarounds for a client who'd
upgraded.

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Tutorials and Custom Solutions
http://PeltierTech.com
_______


"Tom Ogilvy" wrote in message
...
shapes(1) is the first shape in the collection

shapes("1") is a shape named "1"

I wouldn't expect any different behavior in any version of excel, but I
don't have xl2007 installed.

this copy from the immediate window demonstrates that behavior in xl97

Selection.Name = "1"
? activesheet.Shapes(1).name
Rectangle 1
? activesheet.Shapes(2).Name
1
? activesheet.Shapes("1").Name
1

You can change a number to text with cstr

? activesheet.Shapes(cstr(1)).Name
1


--
Regards,
Tom Ogilvy



"JCanyoneer" wrote in message
...
Here's what I found so far. In the statement: ActiveSheet.Shapes(Col -
5).Select, Col - 5 is not working. I tried just putting in the number 1,
same
thing, then I tried "1". This worked. Looks like I will have to go
through
all my code and change this. The problem is that the code I have has to
manipulate based on the Col value (some statements use the Col as the
value
and some add or subtract from it) Any ideas on how to do these
manipulations
and then get the resulting value in side the quotes?

"Tom Ogilvy" wrote:

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming
problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB
relating
to naming buttons on my sheet. Here is the actual code that used to
work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door
layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an
integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object
does
not support this property or method. I am trying to first of all,
check to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text
"Selected" if
it does, I want to msgbox the user to click on another button. If it
doesn't
have that text, I then want to run the "else" section which will re
text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have
also
trusted the location of this file.

VB from excel03 not working in 07
 

Thanks Tom. The explanation helped a lot as I had already noticed that when
the code broke, a drawing on the page had the focus instead of the button I
wanted. I still cannot figure out why upgrading made this happen. It worked
fine in 03 without the quotes. Lucky I guess. For now, the cstr function did
the trick. Thanks again-for all your help with excel.

"Tom Ogilvy" wrote:

shapes(1) is the first shape in the collection

shapes("1") is a shape named "1"

I wouldn't expect any different behavior in any version of excel, but I
don't have xl2007 installed.

this copy from the immediate window demonstrates that behavior in xl97

Selection.Name = "1"
? activesheet.Shapes(1).name
Rectangle 1
? activesheet.Shapes(2).Name
1
? activesheet.Shapes("1").Name
1

You can change a number to text with cstr

? activesheet.Shapes(cstr(1)).Name
1


--
Regards,
Tom Ogilvy



"JCanyoneer" wrote in message
...
Here's what I found so far. In the statement: ActiveSheet.Shapes(Col -
5).Select, Col - 5 is not working. I tried just putting in the number 1,
same
thing, then I tried "1". This worked. Looks like I will have to go through
all my code and change this. The problem is that the code I have has to
manipulate based on the Col value (some statements use the Col as the
value
and some add or subtract from it) Any ideas on how to do these
manipulations
and then get the resulting value in side the quotes?

"Tom Ogilvy" wrote:

Looks like you need to debug your code and find where the disconnect is.

What error did you get - probably an object defined error?

Or a subscript out of range error (that is more obviously a naming
problem).

put in some msgboxes, debug.print statements or watch expressions to see
what values your variables hold and see if they are legitimate.

--
Regards,
Tom Ogilvy


"JCanyoneer" wrote:

I just upgraded to office 07 and have found an eror in some of my VB
relating
to naming buttons on my sheet. Here is the actual code that used to
work in
03...

Sub DoubleDoor(C As Integer, Col As Integer)
ActiveSheet.Shapes(Col - 5).Select
If Selection.Characters.Text = "Selected" Then
MsgBox ("Please click 'Clear All' before changing door
layouts")
Else
ActiveSheet.Shapes(Col).Select
Selection.Characters.Text = "Selected"
etc. etc.

Basically, another sub called this sub sending C and Col. Col is an
integer
gotten by this code...

Col = Application.Caller

I get an error everytime I run this code telling me that this object
does
not support this property or method. I am trying to first of all, check
to
see if a button (named 1 (Col would be 6, 6-5=1)) has the text
"Selected" if
it does, I want to msgbox the user to click on another button. If it
doesn't
have that text, I then want to run the "else" section which will re
text the
button selectd to say "Selected".

Any ideas on this? I have enabled macros when I open the file and have
also
trusted the location of this file.