combo box to activate functions in another cell. mayday,mayday,may
 

please someone, i have been learning excel and working on this for months and
months. i am so frustrated.!!!!! My problem is this. in my excel sheet, i
have cell af16 control many different functions depending on what a person
would type into cell af16. people cant spell right(including myself) so
therefore i am trying to use a combo box from the control toolbar. I have
tried the forms combo box and data validation and the font is too small and
it doesnt look right. My idea is to choose from a list that i created in
cells au822:au846( example of list =m,inl,hol,office etc) each of these words
when placed into cell af16 activates functions which control the calculations
on the rest of the sheet. I have created the combol box and the list comes up
beautifully(list fill), and the cell linked is af16 which DOES take the word
from the drop down list and populates cell af16 with that word. The problem
is thats all it does I cant get the word to activate the functions as if I
were to actually type the word into af16( which makes it work). I know its
code and am stuck, if someone can help with this code I will dedicate so much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday,may
 

"pogo" wrote:

please someone, i have been learning excel and working on this for months and
months. i am so frustrated.!!!!! My problem is this. in my excel sheet, i
have cell af16 control many different functions depending on what a person
would type into cell af16. people cant spell right(including myself) so
therefore i am trying to use a combo box from the control toolbar. I have
tried the forms combo box and data validation and the font is too small and
it doesnt look right. My idea is to choose from a list that i created in
cells au822:au846( example of list =m,inl,hol,office etc) each of these words
when placed into cell af16 activates functions which control the calculations
on the rest of the sheet. I have created the combol box and the list comes up
beautifully(list fill), and the cell linked is af16 which DOES take the word
from the drop down list and populates cell af16 with that word. The problem
is thats all it does I cant get the word to activate the functions as if I
were to actually type the word into af16( which makes it work). I know its
code and am stuck, if someone can help with this code I will dedicate so much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday,may
 

The comb box has a _Click which fires when you select one the values on the
list.
You can run code from that event.

NickHK

"pogo" wrote in message
...
please someone, i have been learning excel and working on this for months
and
months. i am so frustrated.!!!!! My problem is this. in my excel sheet, i
have cell af16 control many different functions depending on what a person
would type into cell af16. people cant spell right(including myself) so
therefore i am trying to use a combo box from the control toolbar. I have
tried the forms combo box and data validation and the font is too small
and
it doesnt look right. My idea is to choose from a list that i created in
cells au822:au846( example of list =m,inl,hol,office etc) each of these
words
when placed into cell af16 activates functions which control the
calculations
on the rest of the sheet. I have created the combol box and the list comes
up
beautifully(list fill), and the cell linked is af16 which DOES take the
word
from the drop down list and populates cell af16 with that word. The
problem
is thats all it does I cant get the word to activate the functions as if I
were to actually type the word into af16( which makes it work). I know its
code and am stuck, if someone can help with this code I will dedicate so
much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday
 

is the click in the upper right hand drop down menu in the section that you
would view code, and im new at this what kind of code do i enter and how,
sorry so new but learning every day

"NickHK" wrote:

The comb box has a _Click which fires when you select one the values on the
list.
You can run code from that event.

NickHK

"pogo" wrote in message
...
please someone, i have been learning excel and working on this for months
and
months. i am so frustrated.!!!!! My problem is this. in my excel sheet, i
have cell af16 control many different functions depending on what a person
would type into cell af16. people cant spell right(including myself) so
therefore i am trying to use a combo box from the control toolbar. I have
tried the forms combo box and data validation and the font is too small
and
it doesnt look right. My idea is to choose from a list that i created in
cells au822:au846( example of list =m,inl,hol,office etc) each of these
words
when placed into cell af16 activates functions which control the
calculations
on the rest of the sheet. I have created the combol box and the list comes
up
beautifully(list fill), and the cell linked is af16 which DOES take the
word
from the drop down list and populates cell af16 with that word. The
problem
is thats all it does I cant get the word to activate the functions as if I
were to actually type the word into af16( which makes it work). I know its
code and am stuck, if someone can help with this code I will dedicate so
much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday
 

Yes, kind of....
Make sure the code window of the worksheet you want is open.
Click the drop down at the top left and select you combo box.
You will get the default event inserted for you, which _Change, I think.
So now click the top right drop down and select Click.

NickHK

"pogo" wrote in message
...
is the click in the upper right hand drop down menu in the section that
you
would view code, and im new at this what kind of code do i enter and how,
sorry so new but learning every day

"NickHK" wrote:

The comb box has a _Click which fires when you select one the values on
the
list.
You can run code from that event.

NickHK

"pogo" wrote in message
...
please someone, i have been learning excel and working on this for
months
and
months. i am so frustrated.!!!!! My problem is this. in my excel
sheet, i
have cell af16 control many different functions depending on what a
person
would type into cell af16. people cant spell right(including myself)
so
therefore i am trying to use a combo box from the control toolbar. I
have
tried the forms combo box and data validation and the font is too
small
and
it doesnt look right. My idea is to choose from a list that i created
in
cells au822:au846( example of list =m,inl,hol,office etc) each of
these
words
when placed into cell af16 activates functions which control the
calculations
on the rest of the sheet. I have created the combol box and the list
comes
up
beautifully(list fill), and the cell linked is af16 which DOES take
the
word
from the drop down list and populates cell af16 with that word. The
problem
is thats all it does I cant get the word to activate the functions as
if I
were to actually type the word into af16( which makes it work). I know
its
code and am stuck, if someone can help with this code I will dedicate
so
much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday
 

ok then after I do whatbyou said would I then have to enter any new code or
is that it?

"NickHK" wrote:

Yes, kind of....
Make sure the code window of the worksheet you want is open.
Click the drop down at the top left and select you combo box.
You will get the default event inserted for you, which _Change, I think.
So now click the top right drop down and select Click.

NickHK

"pogo" wrote in message
...
is the click in the upper right hand drop down menu in the section that
you
would view code, and im new at this what kind of code do i enter and how,
sorry so new but learning every day

"NickHK" wrote:

The comb box has a _Click which fires when you select one the values on
the
list.
You can run code from that event.

NickHK

"pogo" wrote in message
...
please someone, i have been learning excel and working on this for
months
and
months. i am so frustrated.!!!!! My problem is this. in my excel
sheet, i
have cell af16 control many different functions depending on what a
person
would type into cell af16. people cant spell right(including myself)
so
therefore i am trying to use a combo box from the control toolbar. I
have
tried the forms combo box and data validation and the font is too
small
and
it doesnt look right. My idea is to choose from a list that i created
in
cells au822:au846( example of list =m,inl,hol,office etc) each of
these
words
when placed into cell af16 activates functions which control the
calculations
on the rest of the sheet. I have created the combol box and the list
comes
up
beautifully(list fill), and the cell linked is af16 which DOES take
the
word
from the drop down list and populates cell af16 with that word. The
problem
is thats all it does I cant get the word to activate the functions as
if I
were to actually type the word into af16( which makes it work). I know
its
code and am stuck, if someone can help with this code I will dedicate
so
much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday
 

Ok this is what the code says, i just copied and pasted it into this reply so
that you could see it. I then exited the design mode and selected a text from
the combo box. the text then went into cell af16( which i have it linked to
cell af16 from the properties section of the combo box) yet it did not
activate the formulas that I have which are linked to cell af16. If I were to
actually type the text into cell af16, that text then starts formulas
dependent on what text is in cell af16 and controls the rest of the sheet,
but the text will go into cell af16 when I use the combo box, yet it will not
activate the formulas that are dependent on cell af16 here is what I copied:

Private Sub ComboBox1_Change()

End Sub

Private Sub ComboBox1_Click()

End Sub

Private Sub Worksheet_Activate()

End Sub

"NickHK" wrote:

Yes, kind of....
Make sure the code window of the worksheet you want is open.
Click the drop down at the top left and select you combo box.
You will get the default event inserted for you, which _Change, I think.
So now click the top right drop down and select Click.

NickHK

"pogo" wrote in message
...
is the click in the upper right hand drop down menu in the section that
you
would view code, and im new at this what kind of code do i enter and how,
sorry so new but learning every day

"NickHK" wrote:

The comb box has a _Click which fires when you select one the values on
the
list.
You can run code from that event.

NickHK

"pogo" wrote in message
...
please someone, i have been learning excel and working on this for
months
and
months. i am so frustrated.!!!!! My problem is this. in my excel
sheet, i
have cell af16 control many different functions depending on what a
person
would type into cell af16. people cant spell right(including myself)
so
therefore i am trying to use a combo box from the control toolbar. I
have
tried the forms combo box and data validation and the font is too
small
and
it doesnt look right. My idea is to choose from a list that i created
in
cells au822:au846( example of list =m,inl,hol,office etc) each of
these
words
when placed into cell af16 activates functions which control the
calculations
on the rest of the sheet. I have created the combol box and the list
comes
up
beautifully(list fill), and the cell linked is af16 which DOES take
the
word
from the drop down list and populates cell af16 with that word. The
problem
is thats all it does I cant get the word to activate the functions as
if I
were to actually type the word into af16( which makes it work). I know
its
code and am stuck, if someone can help with this code I will dedicate
so
much
time to learning excel and then return the help on this forum.

combo box to activate functions in another cell. mayday,mayday
 

Why not just use validation?
Select AF16
Goto Data...
Validation...
Allow:= List
Source:= m,inl,hol,office,etc
HTH

Die_Another_Day

combo box to activate functions in another cell. mayday,mayday
 

because whenever I try data validation or the regular forms control the font
shows up way to small for the people who use the form to read it. I am open
to anyway that I can create a list for people to be able to choose and then
have that choice populate another cell which then by that population starts
the process of further functions and calculations that are already formulated
into the sheet. My whole problen is that when people try to type the words
into a cell they can never get it right therfore they have to ask me for the
solution, well the solution is that they need to spell holiday correctly,(
including myself) but that wont work so I have to make it easier for them to
choose the correct word.
Thanks for answering and helping

"Die_Another_Day" wrote:

Why not just use validation?
Select AF16
Goto Data...
Validation...
Allow:= List
Source:= m,inl,hol,office,etc
HTH

Die_Another_Day

combo box to activate functions in another cell. mayday,mayday
 

Is there a reason you can't increase the cell/Font size?

D_A_D
pogo wrote:
because whenever I try data validation or the regular forms control the font
shows up way to small for the people who use the form to read it. I am open
to anyway that I can create a list for people to be able to choose and then
have that choice populate another cell which then by that population starts
the process of further functions and calculations that are already formulated
into the sheet. My whole problen is that when people try to type the words
into a cell they can never get it right therfore they have to ask me for the
solution, well the solution is that they need to spell holiday correctly,(
including myself) but that wont work so I have to make it easier for them to
choose the correct word.
Thanks for answering and helping

"Die_Another_Day" wrote:

Why not just use validation?
Select AF16
Goto Data...
Validation...
Allow:= List
Source:= m,inl,hol,office,etc
HTH

Die_Another_Day

combo box to activate functions in another cell. mayday,mayday
 

in the data validation and the regular forms toolbar the microsft excel font
is not cheangeable within the drop down lists. the font will populate the
field as the right size font but the drop down list font is similiar to like
a size 3,4,or 5 size font.

"Die_Another_Day" wrote:

Is there a reason you can't increase the cell/Font size?

D_A_D
pogo wrote:
because whenever I try data validation or the regular forms control the font
shows up way to small for the people who use the form to read it. I am open
to anyway that I can create a list for people to be able to choose and then
have that choice populate another cell which then by that population starts
the process of further functions and calculations that are already formulated
into the sheet. My whole problen is that when people try to type the words
into a cell they can never get it right therfore they have to ask me for the
solution, well the solution is that they need to spell holiday correctly,(
including myself) but that wont work so I have to make it easier for them to
choose the correct word.
Thanks for answering and helping

"Die_Another_Day" wrote:

Why not just use validation?
Select AF16
Goto Data...
Validation...
Allow:= List
Source:= m,inl,hol,office,etc
HTH

Die_Another_Day

combo box to activate functions in another cell. mayday,mayday
 

Im totally lost this is the last thing that I need to do in order to finish
this form. I'll keep trying as much as I know , not much unfortunately, but
any help with this last problem of mine would save me some hair left on the
top of my head
Thanks for the responses and trying on this one

"pogo" wrote:

in the data validation and the regular forms toolbar the microsft excel font
is not cheangeable within the drop down lists. the font will populate the
field as the right size font but the drop down list font is similiar to like
a size 3,4,or 5 size font.

"Die_Another_Day" wrote:

Is there a reason you can't increase the cell/Font size?

D_A_D
pogo wrote:
because whenever I try data validation or the regular forms control the font
shows up way to small for the people who use the form to read it. I am open
to anyway that I can create a list for people to be able to choose and then
have that choice populate another cell which then by that population starts
the process of further functions and calculations that are already formulated
into the sheet. My whole problen is that when people try to type the words
into a cell they can never get it right therfore they have to ask me for the
solution, well the solution is that they need to spell holiday correctly,(
including myself) but that wont work so I have to make it easier for them to
choose the correct word.
Thanks for answering and helping

"Die_Another_Day" wrote:

Why not just use validation?
Select AF16
Goto Data...
Validation...
Allow:= List
Source:= m,inl,hol,office,etc
HTH

Die_Another_Day