Copy and Past to Differerent Work Sheet
 

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

BVDSX could be found anywhere unfortunately the data comes from diff
locations all have different formatting preferences, when wafers are built
they go to Probing where data is extracted and then diff location where dies
are packaged then they go through final testing, then go to my place where a
diff set of hands touch, Im trying to get data in one format where everyone
can understand and parameters easy to locate at a glance, the data has spaces
and << signs which makes things really complicated - I have that formatting
under control I think : )
I would like all data under BVDSX copied.
Thanks for taking the time; this will save me a lot of time, hours or days
of formatting and summing data
Thanks again
Terry


"sebastienm" wrote:

Ok, i think i get it except one thing:
- On the origin sheet, could BVDSX appear really anywhere (eg: G52) or only
somewhere in a specific row, say in row 1 eg found in G1?
- If anywhere, say it is found in G52, does that mean the macro should copy
data in G53 and below or the entire column G?
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Hi:
Keyword meaning something like BVDSX - somtimes the data comes with BVDSX
and other parameters in different columns - i need to search entire page for
BVDSX and place in desired location on different page. say Column A1 for
BVDSX, Column B1 for IGSS1, the Keyword is going to be the header name like
"BVDSX" and all the data will be under it.

Thanks
--
Terry


"sebastienm" wrote:

1. What do you mean by 'search keyword'... where can this keyword be found?
any cell like C52, or just in column A, ...??
2. Then, how do you determine the destination? ie which column, and in which
row to start (row1?).
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Thanks sebastienm.
This part works great, but i still need code to search keywork and copy
entire column the keyword sits in.

I have this but i am not sure how to incorporate this code into yours.
Sub FindBVDSX()

Cells.Find(What:="BVDSX", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext,
MatchCase:= _
False, SearchFormat:=False).Activate

End Sub
Thanks in advance.
--
Terry


"sebastienm" wrote:

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

Thanks sebastienm.
This part works great, but i still need code to search keywork and copy
entire column the keyword sits in.

I have this but i am not sure how to incorporate this code into yours.
Sub FindBVDSX()

Cells.Find(What:="BVDSX", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext,
MatchCase:= _
False, SearchFormat:=False).Activate

End Sub
Thanks in advance.
--
Terry


"sebastienm" wrote:

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

Hi:
Keyword meaning something like BVDSX - somtimes the data comes with BVDSX
and other parameters in different columns - i need to search entire page for
BVDSX and place in desired location on different page. say Column A1 for
BVDSX, Column B1 for IGSS1, the Keyword is going to be the header name like
"BVDSX" and all the data will be under it.

Thanks
--
Terry


"sebastienm" wrote:

1. What do you mean by 'search keyword'... where can this keyword be found?
any cell like C52, or just in column A, ...??
2. Then, how do you determine the destination? ie which column, and in which
row to start (row1?).
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Thanks sebastienm.
This part works great, but i still need code to search keywork and copy
entire column the keyword sits in.

I have this but i am not sure how to incorporate this code into yours.
Sub FindBVDSX()

Cells.Find(What:="BVDSX", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext,
MatchCase:= _
False, SearchFormat:=False).Activate

End Sub
Thanks in advance.
--
Terry


"sebastienm" wrote:

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

1. What do you mean by 'search keyword'... where can this keyword be found?
any cell like C52, or just in column A, ...??
2. Then, how do you determine the destination? ie which column, and in which
row to start (row1?).
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Thanks sebastienm.
This part works great, but i still need code to search keywork and copy
entire column the keyword sits in.

I have this but i am not sure how to incorporate this code into yours.
Sub FindBVDSX()

Cells.Find(What:="BVDSX", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext,
MatchCase:= _
False, SearchFormat:=False).Activate

End Sub
Thanks in advance.
--
Terry


"sebastienm" wrote:

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

Ok, i think i get it except one thing:
- On the origin sheet, could BVDSX appear really anywhere (eg: G52) or only
somewhere in a specific row, say in row 1 eg found in G1?
- If anywhere, say it is found in G52, does that mean the macro should copy
data in G53 and below or the entire column G?
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Hi:
Keyword meaning something like BVDSX - somtimes the data comes with BVDSX
and other parameters in different columns - i need to search entire page for
BVDSX and place in desired location on different page. say Column A1 for
BVDSX, Column B1 for IGSS1, the Keyword is going to be the header name like
"BVDSX" and all the data will be under it.

Thanks
--
Terry


"sebastienm" wrote:

1. What do you mean by 'search keyword'... where can this keyword be found?
any cell like C52, or just in column A, ...??
2. Then, how do you determine the destination? ie which column, and in which
row to start (row1?).
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Thanks sebastienm.
This part works great, but i still need code to search keywork and copy
entire column the keyword sits in.

I have this but i am not sure how to incorporate this code into yours.
Sub FindBVDSX()

Cells.Find(What:="BVDSX", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext,
MatchCase:= _
False, SearchFormat:=False).Activate

End Sub
Thanks in advance.
--
Terry


"sebastienm" wrote:

Hi,

Here is a quick example: copying column D on active sheet to column B of
sheet2 of the activeworkbook.
1. It sets 2 ranges : rgOrigin and rgDestination.
2. it copies rgOrigin to rgDestination
'------------------------------------
Sub test()
Dim rgOrigin As Range, rgDestination As Range

'Set origin and destination
Set rgOrigin = ActiveSheet.Range("$D:$D")
Set rgDestination = ActiveWorkbook.Sheets("Sheet2").Range("$B:$B")

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy rgDestination

End Sub
'-------------------------------------------
--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

Good moning folks:
I am trying to search-copy Key Word and data in same column - paste to
different worksheet different column
i am very new to this vb i have most code for formating cells understood
and still at a quandry as to where to start for this, example below.
IGSS1 IGSS2 IDSX BVDSX VTH1 RDSP1
5.20E-10 -2.48E-09 1.1999000E-06 0.3920 0.5380 0.4154
1.28E-09 -1.56E-09 1.1999000E-06 0.3880 0.5388 0.4150
-6.00E-10 -1.60E-09 1.1999000E-06 0.3880 0.5388 0.4148
I would like to have BVDSX in column B IGSS1 in column C as an example.
Thanks very much in advance
Terry

Copy and Past to Differerent Work Sheet
 

Hi Terry,

The sub CopyDataColumn:
-Searches for a string (SearchedTerm) within a worksheet (SearchedSheet).
The whole cell must contain the searched string, say "BVDSX". If you are
looking for partial match, search for "BVDSX*" instead (with the wildcard
character * )
-If not found, the sub just exits.
-If found, the sub determines the end of the data in that column.
-finally it copies the searched string + the its data column in the
destination range (Destination).

Sub test()
'Search for BVDSX in the active sheet and copy data to sheet2 range b1
of the
' active workbook
CopyDataColumn _
"BVDSX", ActiveSheet, ActiveWorkbook.Sheets("sheet2").Range("b1")
End Sub

'------------------------------------
Sub CopyDataColumn( _
SearchedTerm As String, SearchedSheet As Worksheet, Destination As Range)

Dim rgOrigin As Range, rg As Range

'Find SearchedTerm
Set rgOrigin = SearchedSheet.Cells.Find(what:=SearchedTerm,
LookIn:=xlValues, lookat:=xlWhole)
If rgOrigin Is Nothing Then Exit Sub

'Set origin
Set rgOrigin = Application.Range(rgOrigin,
rgOrigin.EntireColumn.Cells(65536).End(xlUp))

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy Destination.Cells(1)

End Sub
'-------------------------------------------

--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

BVDSX could be found anywhere unfortunately the data comes from diff
locations all have different formatting preferences, when wafers are built
they go to Probing where data is extracted and then diff location where dies
are packaged then they go through final testing, then go to my place where a
diff set of hands touch, Im trying to get data in one format where everyone
can understand and parameters easy to locate at a glance, the data has spaces
and << signs which makes things really complicated - I have that formatting
under control I think : )
I would like all data under BVDSX copied.
Thanks for taking the time; this will save me a lot of time, hours or days
of formatting and summing data
Thanks again
Terry

Copy and Past to Differerent Work Sheet
 

Thanks sebastienm. It works perfect.
You folks are great, my hats off to you.
--
Terry


"sebastienm" wrote:

Hi Terry,

The sub CopyDataColumn:
-Searches for a string (SearchedTerm) within a worksheet (SearchedSheet).
The whole cell must contain the searched string, say "BVDSX". If you are
looking for partial match, search for "BVDSX*" instead (with the wildcard
character * )
-If not found, the sub just exits.
-If found, the sub determines the end of the data in that column.
-finally it copies the searched string + the its data column in the
destination range (Destination).

Sub test()
'Search for BVDSX in the active sheet and copy data to sheet2 range b1
of the
' active workbook
CopyDataColumn _
"BVDSX", ActiveSheet, ActiveWorkbook.Sheets("sheet2").Range("b1")
End Sub

'------------------------------------
Sub CopyDataColumn( _
SearchedTerm As String, SearchedSheet As Worksheet, Destination As Range)

Dim rgOrigin As Range, rg As Range

'Find SearchedTerm
Set rgOrigin = SearchedSheet.Cells.Find(what:=SearchedTerm,
LookIn:=xlValues, lookat:=xlWhole)
If rgOrigin Is Nothing Then Exit Sub

'Set origin
Set rgOrigin = Application.Range(rgOrigin,
rgOrigin.EntireColumn.Cells(65536).End(xlUp))

'Copy Origin to Destination
Application.CutCopyMode = False
rgOrigin.Copy Destination.Cells(1)

End Sub
'-------------------------------------------

--
Regards,
Sébastien
<http://www.ondemandanalysis.com


"Terry" wrote:

BVDSX could be found anywhere unfortunately the data comes from diff
locations all have different formatting preferences, when wafers are built
they go to Probing where data is extracted and then diff location where dies
are packaged then they go through final testing, then go to my place where a
diff set of hands touch, Im trying to get data in one format where everyone
can understand and parameters easy to locate at a glance, the data has spaces
and << signs which makes things really complicated - I have that formatting
under control I think : )
I would like all data under BVDSX copied.
Thanks for taking the time; this will save me a lot of time, hours or days
of formatting and summing data
Thanks again
Terry