Hide Rows based on Time Selection in timesheet.
 

thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" .. Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

private Sub Worksheet_Change(ByVal Target As Range)
Dim iRow As Long
On Error GoTo ws_exit:
Application.EnableEvents = False
If Not Intersect(Target, Me.Range("A1:A259")) Is Nothing Then
With Target
iRow = .row
Me.Rows("1:259").Hidden = False
Me.Rows("1:" & iRow - 1).Hidden = True
End With
End If

ws_exit:
Application.EnableEvents = True
End Sub

'This is worksheet event code, which means that it needs to be
'placed in the appropriate worksheet code module, not a standard
'code module. To do this, right-click on the sheet tab, select
'the View Code option from the menu, and paste the code in.




How do you propose toi unhide them?

--

HTH

RP
(remove nothere from the email address if mailing direct)


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

Thanks for the reply..
question?
I assume this is a "private Sub Worksheet_Change(ByVal Target As Range)" ..
How do I add this code to an already existing "private Sub Worksheet_Change"
... that is on the sheet? ...
Also, here is the actual Cell references...

Range is B15:B204

Set StartTime = Range("H4")
set EndTime = Range("H5")

Thanks...

"Tom Ogilvy" wrote:

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

Tom, I also get a
Run-time Error 1004
Method 'Range' of object'_Worksheet' failed
on line:
set rng = Range(B15,cells(rows.count,1).End(xlup))

thanks...
I was also trying to run as a Macro..

"Tom Ogilvy" wrote:

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

Oh, and yes. We use a new sheet for each day.. Do you have any thoughts on
this.


"Tom Ogilvy" wrote:

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

set rng = Range("B15",cells(rows.count,1).End(xlup))

My typo.

No, it isn't a change event, I assumed this was a onetime thing. If you
want to react whenever someone makes an entry, you might try Bob's code.

--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
Tom, I also get a
Run-time Error 1004
Method 'Range' of object'_Worksheet' failed
on line:
set rng = Range(B15,cells(rows.count,1).End(xlup))

thanks...
I was also trying to run as a Macro..

"Tom Ogilvy" wrote:

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that
starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation
List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to
HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I
would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the
timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom

Hide Rows based on Time Selection in timesheet.
 

I get a compile error that "Variable not defined".. StartTime..


help..

thanks

"Tom Ogilvy" wrote:

set rng = Range("B15",cells(rows.count,1).End(xlup))

My typo.

No, it isn't a change event, I assumed this was a onetime thing. If you
want to react whenever someone makes an entry, you might try Bob's code.

--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
Tom, I also get a
Run-time Error 1004
Method 'Range' of object'_Worksheet' failed
on line:
set rng = Range(B15,cells(rows.count,1).End(xlup))

thanks...
I was also trying to run as a Macro..

"Tom Ogilvy" wrote:

You use a new sheet for each day?

Assume time column is column A and times start in cell A2

Dim rng as Range, res as Variant, res1 as Variant
set rng = Range(A2,cells(rows.count,1).End(xlup))

Set StartTime = Range("F9")
set EndTime = Range("F10")
res = Application.Match(StartTime,rng,0)
res1 = application.Match(EndTime,rng,0)
if not iserror(res) then
rows(2).Resize(res).Entirerow.Hidden = True
end if
if not iserror(res1) then
range(rng(res1).offset(1,0),rng(rng.count)).Entire Row.Hidden = True
End if


--
Regards,
Tom Ogilvy


"thom hoyle" wrote in message
...
thanks for looking @ this.

Is it possible too.

I have a timesheet that users use everyday. It has a column that
starts @
5:00am and goes to 12:00 Midnight. Each Row respresents a Tenth of an
hour.
In two other cells I have a "Arrival TIME" and " Departure TIME" ..
Normally
they start @ 8:00am, leave @ 5:00pm .. Both these are DataValidation
List
using the same 5:00am to 12:00am list.
Is it possible too, based on the users selection of ARRIVAL time, to
HIDE
ROWS in the TIME COLUMN that are less than the ARRIVAL Time? .. if the
user
comes in @ 8:00 am, it would hide rows from 5:00am to 7:50am .. I
would
like
to do the same with Departure Time.. If the user leaves @ 5:00pm .. it
would
hide from 5:10pm to 12:00 midnight.. Basically to "shorten" the
timesheet
up
to the hours they are working.

I hope I have explained this correclty. Thanks for you help.

thom