Code Does Not Work
 

Greetings,

I am trying to add two numbers together but I can't get it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman

Code Does Not Work
 

Hi
not tested but try:
T10.Text = CDbl(T8.Text) + CDbl(T9.Text)

--
Regards
Frank Kabel
Frankfurt, Germany

Minitman wrote:
Greetings,

I am trying to add two numbers together but I can't get it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman

Code Does Not Work
 

Convert the text to an numerical data type such as Decimal
for exmpl:

Dim totl As Variant
totl = CDec(TextBox1.Value) + CDec(TextBox2.Value)

HTH
Devin
-----Original Message-----
Greetings,

I am trying to add two numbers together but I can't get
it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both
T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman
.

Code Does Not Work
 

Hi

This example worked fine for me on a userform.

TextBox3.Value = Format(Val(TextBox1.Value) + Val(TextBox2.Value),
"$###.00")
TextBox1.Value = Format(Val(TextBox1.Value), "$###.00")
TextBox2.Value = Format(Val(TextBox2.Value), "$###.00")


HTH

Ken

Code Does Not Work
 

Hey Ken,

Thanks for the reply, however it didn't work for me.

As written (Names changes to actual), this code overwrote TextBox 1&2
with 0's, leaving TextBox 3 = 0.

Not sure what is up with my Excel.

-Minitman


On Tue, 14 Dec 2004 17:05:36 -0500, "Ken Macksey"
wrote:

Hi

This example worked fine for me on a userform.

TextBox3.Value = Format(Val(TextBox1.Value) + Val(TextBox2.Value),
"$###.00")
TextBox1.Value = Format(Val(TextBox1.Value), "$###.00")
TextBox2.Value = Format(Val(TextBox2.Value), "$###.00")


HTH

Ken

Code Does Not Work
 

Hey Devin,

The CDec() worked like a charm as did the CDbl()(from Frank's reply).

Thank you.

-Minitman


On Tue, 14 Dec 2004 13:57:49 -0800, "DMoney"
wrote:

Convert the text to an numerical data type such as Decimal
for exmpl:

Dim totl As Variant
totl = CDec(TextBox1.Value) + CDec(TextBox2.Value)

HTH
Devin
-----Original Message-----
Greetings,

I am trying to add two numbers together but I can't get
it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both
T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman
.

Code Does Not Work
 

Hey Frank,

Thanks for the response

Both you and Devin came up with similar solutions, and they both work
very well, [CDec() and CDbl()], I can not see any advantage of using
one over the other, is there one?

Thank you.

-Minitman


On Tue, 14 Dec 2004 22:54:26 +0100, "Frank Kabel"
wrote:

Hi
not tested but try:
T10.Text = CDbl(T8.Text) + CDbl(T9.Text)

--
Regards
Frank Kabel
Frankfurt, Germany

Minitman wrote:
Greetings,

I am trying to add two numbers together but I can't get it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman

Code Does Not Work
 

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the $,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

--
Regards,
Tom Ogilvy

"Minitman" wrote in message
...
Hey Devin,

The CDec() worked like a charm as did the CDbl()(from Frank's reply).

Thank you.

-Minitman


On Tue, 14 Dec 2004 13:57:49 -0800, "DMoney"
wrote:

Convert the text to an numerical data type such as Decimal
for exmpl:

Dim totl As Variant
totl = CDec(TextBox1.Value) + CDec(TextBox2.Value)

HTH
Devin
-----Original Message-----
Greetings,

I am trying to add two numbers together but I can't get
it to give the
right answer. Where T8 = $100.00 and T9 = $ 8.00. Both
T8 and T9 are
TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman
.

Code Does Not Work - Solved
 

Thanks Tom, that clarifies the matter.

-Minitman


On Tue, 14 Dec 2004 21:52:03 -0500, "Tom Ogilvy"
wrote:

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the $,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

Code Does Not Work
 

Hi
see Tom's reply :-)

--
Regards
Frank Kabel
Frankfurt, Germany

Minitman wrote:
Hey Frank,

Thanks for the response

Both you and Devin came up with similar solutions, and they both work
very well, [CDec() and CDbl()], I can not see any advantage of using
one over the other, is there one?

Thank you.

-Minitman


On Tue, 14 Dec 2004 22:54:26 +0100, "Frank Kabel"
wrote:

Hi
not tested but try:
T10.Text = CDbl(T8.Text) + CDbl(T9.Text)

--
Regards
Frank Kabel
Frankfurt, Germany

Minitman wrote:
Greetings,

I am trying to add two numbers together but I can't get it to give
the right answer. Where T8 = $100.00 and T9 = $ 8.00. Both T8 and
T9 are TextBoxes as is T10.

Here are a couple of the variations of code that I tried:

T10.Text = Val(T8.Text) + Val(T9.Text)
returns 0

T10.Text = Val(T8.Text) + T9.Text
returns 8

T10.Text = T8.Text + Val(T9.Text)
returns 100

T10.Text = T8.Text + T9.Text
T10.Text = T8.Value + T9.Text
T10.Text = T8.Text + T9.Value
T10.Text = T8.Value + T9.Value
Each returns $ 100.00$ 8.00

Does anyone see what is wrong?

Any help would be appreciated.

TIA

-Minitman

Code Does Not Work
 

The + operator is also used in .Net for concatenation. You can use the
Convert class to convert a type to another type as

Convert.ToInt32(string)

with regards,


J.V.Ravichandran
- http://www.geocities.com/
jvravichandran
- http://www.411asp.net/func/search?
qry=Ravichandran+J.V.&cob=aspnetpro
- http://www.southasianoutlook.com
- http://www.MSDNAA.Net
- http://www.csharphelp.com
- http://www.poetry.com/Publications/
display.asp?ID=P3966388&BN=999&PN=2
- Or, just search on "J.V.Ravichandran"
at http://www.Google.com

*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!

Code Does Not Work
 

Hey Tom,

What if instead of a number you have "" sometimes and 0 in others, in
the same TextBox. What do you use then.

-Minitman


On Tue, 14 Dec 2004 21:52:03 -0500, "Tom Ogilvy"
wrote:

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the $,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

Code Does Not Work
 

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

--
Regards,
Tom Ogilvy


"Minitman" wrote in message
...
Hey Tom,

What if instead of a number you have "" sometimes and 0 in others, in
the same TextBox. What do you use then.

-Minitman


On Tue, 14 Dec 2004 21:52:03 -0500, "Tom Ogilvy"
wrote:

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the
$,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

Code Does Not Work
 

Hey Tom,

WOW! I didn't know you could do more then one elseif at a time! That
is very good to know - Thanks.

As for the reason for this post, both solutions look good.

Thank you.

-Minitman

On Thu, 16 Dec 2004 08:43:38 -0500, "Tom Ogilvy"
wrote:

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

Code Does Not Work
 

Hey Tom,

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 3 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 3 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Dim vVal4
...
If IsNumeric(T4.Value) And T4.Value < "" Then
vVal4 = T4.Value
Else
vVal4 = 0
End If


I am confused as to how to make it see that T4 has a valid entry (I
tried - vVal4 = CDbl(T4.Value), but got a 'type mismatch' error). I
could really use your insight.

TIA

-Minitman

On Thu, 16 Dec 2004 08:35:51 -0600, Minitman
wrote:

Hey Tom,

WOW! I didn't know you could do more then one elseif at a time! That
is very good to know - Thanks.

As for the reason for this post, both solutions look good.

Thank you.

-Minitman

On Thu, 16 Dec 2004 08:43:38 -0500, "Tom Ogilvy"
wrote:

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

Code Does Not Work
 

Correction!

Reads:
to box 4. I entered a figure into box 3 (the code formats the boxes

Should read:
to box 4. I entered a figure into box 4 (the code formats the boxes

Sorry for the typo

-Minitman
On Thu, 16 Dec 2004 09:51:42 -0600, Minitman
wrote:

Hey Tom,

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 3 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 3 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Dim vVal4
...
If IsNumeric(T4.Value) And T4.Value < "" Then
vVal4 = T4.Value
Else
vVal4 = 0
End If


I am confused as to how to make it see that T4 has a valid entry (I
tried - vVal4 = CDbl(T4.Value), but got a 'type mismatch' error). I
could really use your insight.

TIA

-Minitman

On Thu, 16 Dec 2004 08:35:51 -0600, Minitman
wrote:

Hey Tom,

WOW! I didn't know you could do more then one elseif at a time! That
is very good to know - Thanks.

As for the reason for this post, both solutions look good.

Thank you.

-Minitman

On Thu, 16 Dec 2004 08:43:38 -0500, "Tom Ogilvy"
wrote:

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

Code Does Not Work
 

OPPs! Found another one.

Here is the corrected whole paragraph in it's entirety:

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 4 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 4 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Sorry for the typos.

-Minitman

On Thu, 16 Dec 2004 09:51:42 -0600, Minitman
wrote:

Hey Tom,

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 3 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 3 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Dim vVal4
...
If IsNumeric(T4.Value) And T4.Value < "" Then
vVal4 = T4.Value
Else
vVal4 = 0
End If


I am confused as to how to make it see that T4 has a valid entry (I
tried - vVal4 = CDbl(T4.Value), but got a 'type mismatch' error). I
could really use your insight.

TIA

-Minitman

On Thu, 16 Dec 2004 08:35:51 -0600, Minitman
wrote:

Hey Tom,

WOW! I didn't know you could do more then one elseif at a time! That
is very good to know - Thanks.

As for the reason for this post, both solutions look good.

Thank you.

-Minitman

On Thu, 16 Dec 2004 08:43:38 -0500, "Tom Ogilvy"
wrote:

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

Code Does Not Work
 

Hey Tom,

After rereading this I realized that one question remains, if Val and
CDbl both have problems with 8.00 %, then what will work?

This would seem to apply to my last question.

Any help would be appreciated.

TIA

-Minitman



On Tue, 14 Dec 2004 21:52:03 -0500, "Tom Ogilvy"
wrote:

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the $,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

Code Does Not Work
 

Remember, Cdbl won't handle the %, and isnumeric doesn't work either.

If Trim(T4.Value) < "" Then
vVal4 = 0
Else
s = Trim(T4.Value)
s = left(s,len(s)-1)
vVal = cdbl(s) * 0.01
End If

--
Regards,
Tom Ogilvy


"Minitman" wrote in message
...
OPPs! Found another one.

Here is the corrected whole paragraph in it's entirety:

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 4 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 4 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Sorry for the typos.

-Minitman

On Thu, 16 Dec 2004 09:51:42 -0600, Minitman
wrote:

Hey Tom,

The first time I ran with the four boxes all = "". it ran until it got
to box 4. I entered a figure into box 3 (the code formats the boxes
on exiting. Boxes 1. 2 and 3 are $ ###0.00 and box 4 is ##0.00 %) and
ran it again. It still wanted a figure in box 3 (where there now was
one). The code worked on the other 3 boxes when they = "", why not
this box? Here is the code for box 4:

Dim vVal4
...
If IsNumeric(T4.Value) And T4.Value < "" Then
vVal4 = T4.Value
Else
vVal4 = 0
End If


I am confused as to how to make it see that T4 has a valid entry (I
tried - vVal4 = CDbl(T4.Value), but got a 'type mismatch' error). I
could really use your insight.

TIA

-Minitman

On Thu, 16 Dec 2004 08:35:51 -0600, Minitman
wrote:

Hey Tom,

WOW! I didn't know you could do more then one elseif at a time! That
is very good to know - Thanks.

As for the reason for this post, both solutions look good.

Thank you.

-Minitman

On Thu, 16 Dec 2004 08:43:38 -0500, "Tom Ogilvy"
wrote:

Put in checks for those conditions

if tb8.Value = "" then
vVal = 0
elseif tb8.Value = 0 then
vVal = 0
elseif isnumeric(tb8.value) then
vVal = cdbl(tb8.value)
else
vVal = 0
End if

or probably better:

if isnumeric(tb8.Value) and tb8.Value < "" then
vVal = cdbl(tb8.Value)
else
vVal = 0
End if

Code Does Not Work
 

Val doesn't have a problem with it - it just doesn't utilize the %. The
solution was to multiply it by .01

--
Regards,
Tom Ogilvy

"Minitman" wrote in message
...
Hey Tom,

After rereading this I realized that one question remains, if Val and
CDbl both have problems with 8.00 %, then what will work?

This would seem to apply to my last question.

Any help would be appreciated.

TIA

-Minitman



On Tue, 14 Dec 2004 21:52:03 -0500, "Tom Ogilvy"
wrote:

Here is why

? val("$8.00")
0

Val stops evaluating at the first non-numeric character. That is why it
didn't work "right" with 8.00%. However, cdbl will accept and ignore the
$,
but will cause an error with "8.00%"

Using cdec is overkill. It uses up 14 bytes to store a value and is
designed for huge numbers. Double (8 bytes) or single (4 bytes) is more
realistic: cdbl or csng

Code Does Not Work
 

Hey Tom,

Thanks for clearing up my confusion.

-Minitman

On Thu, 16 Dec 2004 12:53:26 -0500, "Tom Ogilvy"
wrote:

Val doesn't have a problem with it - it just doesn't utilize the %. The
solution was to multiply it by .01

Code Does Not Work
 

Hey Tom

Once I put a "Not" in front of the Trim(T4.Value) line, It works
perfectly,

I needed a direction to look at and that you did provide, Thank you.

-Minitman




On Thu, 16 Dec 2004 12:48:41 -0500, "Tom Ogilvy"
wrote:

Remember, Cdbl won't handle the %, and isnumeric doesn't work either.

If Trim(T4.Value) < "" Then
vVal4 = 0
Else
s = Trim(T4.Value)
s = left(s,len(s)-1)
vVal = cdbl(s) * 0.01
End If