VBA Conditional Formatting
 

Ok, I know the question has been asked several times (trust me I did
search) but I couldn't find an answer to my question...

I am trying to use VBA to shade cells based on more than 3 conditions
I think my problem is that I do not know VBA well enough to change cod
I have found in other examples to fit my needs.

Here is the example code I am trying to change:

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("G:G"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "NSP"
cl.EntireRow.Interior.ColorIndex = 35
Case "UAB"
cl.EntireRow.Interior.ColorIndex = 36
Case "IA"
cl.EntireRow.Interior.ColorIndex = 37
Case "AO"
cl.EntireRow.Interior.ColorIndex = 39
Case "US"
cl.EntireRow.Interior.ColorIndex = 40
Case "A"
cl.EntireRow.Interior.ColorIndex = 0
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub

If I want to change this to do formatting based on a single cell (o
range of cells) to change a single cell (or range of cells), what do
need to change?

E.g. I am trying to color a single cell (in a range) based on the valu
of that same cell. If it says "Completed" I want it green (color inde
35), if it says "Error" I want it yellow (color index 36), etc.

Thanks in advance for any help..

--
Message posted from http://www.ExcelForum.com

VBA Conditional Formatting
 

Hi
1. just change the range check in the line
Set rng = Intersect(Target, Range("G:G"))
to your needs. e.g. if you only want to check cell G1 change it to
Set rng = Intersect(Target, Range("G:1))

2. change the select case construct according to syour needs. e.g.
....
Select Case cl.Text
Case "Completed"
cl.Interior.ColorIndex = 35
Case "Error"
cl.Interior.ColorIndex = 36
...
end select
....


--
Regards
Frank Kabel
Frankfurt, Germany

Ok, I know the question has been asked several times (trust me I did
a
search) but I couldn't find an answer to my question...

I am trying to use VBA to shade cells based on more than 3
conditions.
I think my problem is that I do not know VBA well enough to change
code I have found in other examples to fit my needs.

Here is the example code I am trying to change:

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("G:G"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "NSP"
cl.EntireRow.Interior.ColorIndex = 35
Case "UAB"
cl.EntireRow.Interior.ColorIndex = 36
Case "IA"
cl.EntireRow.Interior.ColorIndex = 37
Case "AO"
cl.EntireRow.Interior.ColorIndex = 39
Case "US"
cl.EntireRow.Interior.ColorIndex = 40
Case "A"
cl.EntireRow.Interior.ColorIndex = 0
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub

If I want to change this to do formatting based on a single cell (or
range of cells) to change a single cell (or range of cells), what do
I
need to change?

E.g. I am trying to color a single cell (in a range) based on the
value of that same cell. If it says "Completed" I want it green
(color index 35), if it says "Error" I want it yellow (color index
36), etc.

Thanks in advance for any help...


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

Here are the first two conditions. For any others just add extra Case
statements with appropriate colorindex.

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("G:G"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Completed"
cl.EntireRow.Interior.ColorIndex = 35
Case "Error"
cl.EntireRow.Interior.ColorIndex = 36
Exit Sub
End Select
Next cl
End If

End Sub

It already handles any range in column G, as it loops through each
intersecting cell.. If you want more columns, use

Set rng = Intersect(Target, Range("G:M "))

--

HTH

Bob Phillips
... looking out across Poole Harbour to the Purbecks
(remove nothere from the email address if mailing direct)

"cmcfalls " wrote in message
...
Ok, I know the question has been asked several times (trust me I did a
search) but I couldn't find an answer to my question...

I am trying to use VBA to shade cells based on more than 3 conditions.
I think my problem is that I do not know VBA well enough to change code
I have found in other examples to fit my needs.

Here is the example code I am trying to change:

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("G:G"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "NSP"
cl.EntireRow.Interior.ColorIndex = 35
Case "UAB"
cl.EntireRow.Interior.ColorIndex = 36
Case "IA"
cl.EntireRow.Interior.ColorIndex = 37
Case "AO"
cl.EntireRow.Interior.ColorIndex = 39
Case "US"
cl.EntireRow.Interior.ColorIndex = 40
Case "A"
cl.EntireRow.Interior.ColorIndex = 0
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub

If I want to change this to do formatting based on a single cell (or
range of cells) to change a single cell (or range of cells), what do I
need to change?

E.g. I am trying to color a single cell (in a range) based on the value
of that same cell. If it says "Completed" I want it green (color index
35), if it says "Error" I want it yellow (color index 36), etc.

Thanks in advance for any help...


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

Almost there guys....this code below works fine, but it colors th
entire row instead of the specific cell (I want cell I4, I5, I6, etc
only colored). Where's my error?

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("I:I"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.EntireRow.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.EntireRow.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.EntireRow.Interior.ColorIndex = 36
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Su

--
Message posted from http://www.ExcelForum.com

VBA Conditional Formatting
 

Hi
change all lines like
cl.EntireRow.Interior.ColorIndex = value
to
cl.Interior.ColorIndex = value

--
Regards
Frank Kabel
Frankfurt, Germany

Almost there guys....this code below works fine, but it colors the
entire row instead of the specific cell (I want cell I4, I5, I6, etc.
only colored). Where's my error?

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("I:I"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.EntireRow.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.EntireRow.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.EntireRow.Interior.ColorIndex = 36
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

Again we go

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

If notIntersect(Target, Range("I:I")) Is Nothing Then
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.Interior.ColorIndex = 36
Case Else
cl.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub



--

HTH

Bob Phillips
... looking out across Poole Harbour to the Purbecks
(remove nothere from the email address if mailing direct)

"cmcfalls " wrote in message
...
Almost there guys....this code below works fine, but it colors the
entire row instead of the specific cell (I want cell I4, I5, I6, etc.
only colored). Where's my error?

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("I:I"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.EntireRow.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.EntireRow.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.EntireRow.Interior.ColorIndex = 36
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

oops last minute change

correction to

If Not Intersect(Target, Range("I:I")) Is Nothing Then


--

HTH

Bob Phillips
... looking out across Poole Harbour to the Purbecks
(remove nothere from the email address if mailing direct)

"Bob Phillips" wrote in message
...
Again we go

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

If notIntersect(Target, Range("I:I")) Is Nothing Then
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.Interior.ColorIndex = 36
Case Else
cl.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub



--

HTH

Bob Phillips
... looking out across Poole Harbour to the Purbecks
(remove nothere from the email address if mailing direct)

"cmcfalls " wrote in message
...
Almost there guys....this code below works fine, but it colors the
entire row instead of the specific cell (I want cell I4, I5, I6, etc.
only colored). Where's my error?

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions

Dim rng As Range

Set rng = Intersect(Target, Range("I:I"))
If rng Is Nothing Then
Exit Sub
Else
Dim cl As Range
For Each cl In rng
Select Case cl.Text
Case "Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected & Returned"
cl.EntireRow.Interior.ColorIndex = 35
Case "Corrected, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Completed, Not Yet Returned"
cl.EntireRow.Interior.ColorIndex = 3
Case "Received, Not Yet Completed"
cl.EntireRow.Interior.ColorIndex = 3
Case "Not Yet Received"
cl.EntireRow.Interior.ColorIndex = 3
Case "Violation: See Notes"
cl.EntireRow.Interior.ColorIndex = 36
Case Else
cl.EntireRow.Interior.ColorIndex = 0
Exit Sub
End Select
Next cl
End If

End Sub


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

With much gratitiude, I cower in the shadows of your knowledge.

Thanks a million...


---
Message posted from http://www.ExcelForum.com/

VBA Conditional Formatting
 

Hey, easy now<G

Bob

"cmcfalls " wrote in message
...
With much gratitiude, I cower in the shadows of your knowledge.

Thanks a million...


---
Message posted from http://www.ExcelForum.com/