Filtered data selection using vba
 

Hi

I have filtered some data (they are filted from differnet
rows)

I want to skip the first 5 rows of this filtered data and
select the remaining data (as i cannot filter anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance

Filtered data selection using vba
 

When filtered, some rows are hidden and some visible.

Do you want to select the 6th visible row and beyond to copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra" wrote in message
...
Hi

I have filtered some data (they are filted from differnet
rows)

I want to skip the first 5 rows of this filtered data and
select the remaining data (as i cannot filter anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance

Filtered data selection using vba
 

Tom Ogilvy gave me this code to increment down one cell at a time in a
single column on a filtered sheet. I have this as a separate macro and
insert a call to it when I need to go down a cell. It works great for me.

Ed

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub

"sudhendra" wrote in message
...
Hi

I have filtered some data (they are filted from differnet
rows)

I want to skip the first 5 rows of this filtered data and
select the remaining data (as i cannot filter anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance

Filtered data selection using vba
 

Thanks very much for the prompt reply

if i want to increment 5 times then how do i call this sub




-----Original Message-----
Tom Ogilvy gave me this code to increment down one cell
at a time in a
single column on a filtered sheet. I have this as a
separate macro and
insert a call to it when I need to go down a cell. It
works great for me.

Ed

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub

"sudhendra" wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.

Filtered data selection using vba
 

I tried with this code below :-

The problem is if some of my rows are invisible like if
the data rows filtered are Like 1, 3,
7,12,111,112,113,114...897
I am unable to get the fourth and beyond ie., 111th row
to 897th row for selection.

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub


-----Original Message-----
When filtered, some rows are hidden and some visible.

Do you want to select the 6th visible row and beyond to
copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra" wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.

Filtered data selection using vba
 

There was an omitted statement in my code - this correct appears to work:

Sub CopyAfterfirstFive()
Dim rng As Range, rng1 As Range, cell As Range
Dim i As Long
Set rng = ActiveSheet.AutoFilter.Range.Columns(1).Cells
Set rng = rng.Offset(1, 0).Resize(rng.Rows.Count - 1)
Set rng1 = rng(rng.Count)
Set rng = rng.SpecialCells(xlVisible)
i = 0
For Each cell In rng
i = i + 1
If i = 6 Then
Range(cell, rng1).EntireRow.Copy Destination:= _
Worksheets("Sheet2").Range("A1")
Exit For
End If
Next


End Sub

This does what you said you wanted. If you don't want to use it, then so be
it.

--
Regards,
Tom Ogilvy


"sudhendra" wrote in message
...
I tried with this code below :-

The problem is if some of my rows are invisible like if
the data rows filtered are Like 1, 3,
7,12,111,112,113,114...897
I am unable to get the fourth and beyond ie., 111th row
to 897th row for selection.

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub


-----Original Message-----
When filtered, some rows are hidden and some visible.

Do you want to select the 6th visible row and beyond to
copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra" wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.

Filtered data selection using vba
 

After closely reading your postings, it sounds like you are not properly
applying the filter (a filter can filter the entire sheet). If you have
blank rows in your data, you need to select all your data and then apply the
filter. If You still want to copy filled rows beyond the autofilter range,
you can do:

Dim rng as Range, rng1 as range
set rng = Activesheet.Autofilter.range.Columns(1).cells
set rng = rng.offset(1,0)
set rng1 = rng(rng.count)
set rng = Cells(rows.count,1).End(xlup)
range(rng1,rng).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")

--
Regards,
Tom Ogilvy




"sudhendra" wrote in message
...
I tried with this code below :-

The problem is if some of my rows are invisible like if
the data rows filtered are Like 1, 3,
7,12,111,112,113,114...897
I am unable to get the fourth and beyond ie., 111th row
to 897th row for selection.

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub


-----Original Message-----
When filtered, some rows are hidden and some visible.

Do you want to select the 6th visible row and beyond to
copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra" wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.

Filtered data selection using vba
 

As I said, if your data isn't included in the Autofilter range, then no code
that uses that range will work - but if that is the problem, then you don't
need any code in the first place - you need to set up your filter range
properly.

--
Regards,
Tom Ogilvy

sudhendra wrote in message
...
Dear Tom

Thanks very much for your code not that i dont want to
use it i was experiment with the other code so i reposted
it I will retry your code now and get back to you.

Hey thanks again!!!
-----Original Message-----
There was an omitted statement in my code - this correct
appears to work:

Sub CopyAfterfirstFive()
Dim rng As Range, rng1 As Range, cell As Range
Dim i As Long
Set rng = ActiveSheet.AutoFilter.Range.Columns(1).Cells
Set rng = rng.Offset(1, 0).Resize(rng.Rows.Count - 1)
Set rng1 = rng(rng.Count)
Set rng = rng.SpecialCells(xlVisible)
i = 0
For Each cell In rng
i = i + 1
If i = 6 Then
Range(cell, rng1).EntireRow.Copy Destination:= _
Worksheets("Sheet2").Range("A1")
Exit For
End If
Next


End Sub

This does what you said you wanted. If you don't want
to use it, then so be
it.

--
Regards,
Tom Ogilvy


"sudhendra" wrote
in message
...
I tried with this code below :-

The problem is if some of my rows are invisible like if
the data rows filtered are Like 1, 3,
7,12,111,112,113,114...897
I am unable to get the fourth and beyond ie., 111th row
to 897th row for selection.

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng
(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub


-----Original Message-----
When filtered, some rows are hidden and some visible.

Do you want to select the 6th visible row and beyond
to
copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra"
wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered
data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.



.

Filtered data selection using vba
 

Dear Tom

Greetings from Sudhendra

Here is the link where you could have a look at the data
i have filtered (its a jpeg).

http://groups.msn.com/suzzidba/work.msnw?
action=ShowPhoto&PhotoID=146

I tried your code again but could not work for this
particular data, i figured that if there the rows
displayed are not continus then the code does not work (i
mean to say from he example row 1, 5, 511 are not
continus)( I want to select from rows 515 and beyond)
I have another data where after filter displays row 1, 7,
8, 9..... then the code you have given works

Any thoughts....thanks once again

Sudhendra


-----Original Message-----
As I said, if your data isn't included in the Autofilter
range, then no code
that uses that range will work - but if that is the
problem, then you don't
need any code in the first place - you need to set up
your filter range
properly.

--
Regards,
Tom Ogilvy

sudhendra wrote in
message
...
Dear Tom

Thanks very much for your code not that i dont want to
use it i was experiment with the other code so i
reposted
it I will retry your code now and get back to you.

Hey thanks again!!!
-----Original Message-----
There was an omitted statement in my code - this
correct
appears to work:

Sub CopyAfterfirstFive()
Dim rng As Range, rng1 As Range, cell As Range
Dim i As Long
Set rng = ActiveSheet.AutoFilter.Range.Columns
(1).Cells
Set rng = rng.Offset(1, 0).Resize(rng.Rows.Count - 1)
Set rng1 = rng(rng.Count)
Set rng = rng.SpecialCells(xlVisible)
i = 0
For Each cell In rng
i = i + 1
If i = 6 Then
Range(cell, rng1).EntireRow.Copy Destination:= _
Worksheets("Sheet2").Range("A1")
Exit For
End If
Next


End Sub

This does what you said you wanted. If you don't want
to use it, then so be
it.

--
Regards,
Tom Ogilvy


"sudhendra"
wrote
in message
...
I tried with this code below :-

The problem is if some of my rows are invisible
like if
the data rows filtered are Like 1, 3,
7,12,111,112,113,114...897
I am unable to get the fourth and beyond ie., 111th
row
to 897th row for selection.

Sub Increment1()
Dim rng As Range, rng1 As Range
Dim icol As Long
icol = ActiveCell.Column
Set rng = ActiveSheet.AutoFilter.Range
Set rng = Intersect(rng, Columns(icol))
Set rng = Range(ActiveCell.Offset(1, 0), rng
(rng.Count))
On Error Resume Next
Set rng1 = rng.SpecialCells(xlVisible)
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1(1).Select
End If
End Sub


-----Original Message-----
When filtered, some rows are hidden and some
visible.

Do you want to select the 6th visible row and
beyond
to
copy.

What kind of filter did you apply

Dim rng as Range, rng1 as range, cell as range
Dim i as long
set rng = Activesheet.Autofilter.range.Columns(1)
set rng = rng.offset(1,0).Resize(rng.rows.count-1)
set rng1 = rng(rng.count)
set rng = rng.Specialcells(xlvisible)
i = 0
for each cell in rng
i = i + 1
if i = 6 then
range(cell,rng1).EntireRow.copy Destination:= _
Worksheets("Sheet2").Range("A1")
exit for
end if
Next


--
Regards,
Tom Ogilvy

"sudhendra"
wrote
in message
...
Hi

I have filtered some data (they are filted from
differnet
rows)

I want to skip the first 5 rows of this filtered
data
and
select the remaining data (as i cannot filter
anyfurther)
copy it into another new sheet.

Can any one help please thanks inadvance


.



.



.