Run-time error on command button
 

On a worksheet named Customer, is a command button (among
other command buttons) with a macro named "GoToMetric1"
assigned to it. The macro code is located in Module2 and
the code is:

Sub GoToMetric1()
Sheets("Metrics").Select
Range("A1").Select
ActiveSheet.ChartObjects("Chart 13").Activate
With ActiveChart.Parent
.Height = 660 '660 X 780 is landscape ratio 77%
(8 1/2" x 11")
.Width = 780
.Top = 10
.Left = 125
End With
End Sub

On a worksheet named Metrics, are various charts, with
Chart 13 displaying data.

The intent is when the user clicks on the command button,
Chart 13 (among other charts) on the Metrics worksheet
comes up; however, I'm getting a run-time error '1004':
Activate method of ChartObject class failed. Can someone
help me correct this error?

There is also an Auto Open routine being run when the
workbook opens, located in Module1, with the following
code:

Sub Auto_Open()
Application.ScreenUpdating = False
Application.DisplayFullScreen = True
For Each ws In Worksheets
If ws.Visible = xlSheetVisible Then
ws.Select
Application.GoTo ws.Range("A1"), True
ActiveWindow.DisplayGridlines = False
End If
Next
Worksheets("Scorecard").Select
ThisWorkbook.Colors(7) = RGB(255, 124, 128)
Application.AutoPercentEntry = True
Application.ScreenUpdating = True
End Sub

Run-time error on command button
 

Try to re-write your code this way:

Sub GoToMetric1()
With Charts("Chart 13")
.Height = 660
.Width = 780
.Top = 10
.Left = 125
.Activate
End With
End Sub

Make sure that the chart named "Chart 13" exists.

Good luck -
RADO


"Phil Hageman" wrote in message
...
On a worksheet named Customer, is a command button (among
other command buttons) with a macro named "GoToMetric1"
assigned to it. The macro code is located in Module2 and
the code is:

Sub GoToMetric1()
Sheets("Metrics").Select
Range("A1").Select
ActiveSheet.ChartObjects("Chart 13").Activate
With ActiveChart.Parent
.Height = 660 '660 X 780 is landscape ratio 77%
(8 1/2" x 11")
.Width = 780
.Top = 10
.Left = 125
End With
End Sub

On a worksheet named Metrics, are various charts, with
Chart 13 displaying data.

The intent is when the user clicks on the command button,
Chart 13 (among other charts) on the Metrics worksheet
comes up; however, I'm getting a run-time error '1004':
Activate method of ChartObject class failed. Can someone
help me correct this error?

There is also an Auto Open routine being run when the
workbook opens, located in Module1, with the following
code:

Sub Auto_Open()
Application.ScreenUpdating = False
Application.DisplayFullScreen = True
For Each ws In Worksheets
If ws.Visible = xlSheetVisible Then
ws.Select
Application.GoTo ws.Range("A1"), True
ActiveWindow.DisplayGridlines = False
End If
Next
Worksheets("Scorecard").Select
ThisWorkbook.Colors(7) = RGB(255, 124, 128)
Application.AutoPercentEntry = True
Application.ScreenUpdating = True
End Sub

Subscript out of range error
 

Hi RADO. Thanks for your reply. I entered your code
exactly as you have it here and now receive a run-time
error '9': "Subscript out of range." Is there more to
this?

Thanks, Phil
-----Original Message-----
Try to re-write your code this way:

Sub GoToMetric1()
With Charts("Chart 13")
.Height = 660
.Width = 780
.Top = 10
.Left = 125
.Activate
End With
End Sub

Make sure that the chart named "Chart 13" exists.

Good luck -
RADO


"Phil Hageman"
wrote in message
...
On a worksheet named Customer, is a command button
(among
other command buttons) with a macro named "GoToMetric1"
assigned to it. The macro code is located in Module2
and
the code is:

Sub GoToMetric1()
Sheets("Metrics").Select
Range("A1").Select
ActiveSheet.ChartObjects("Chart 13").Activate
With ActiveChart.Parent
.Height = 660 '660 X 780 is landscape ratio 77%
(8 1/2" x 11")
.Width = 780
.Top = 10
.Left = 125
End With
End Sub

On a worksheet named Metrics, are various charts, with
Chart 13 displaying data.

The intent is when the user clicks on the command
button,
Chart 13 (among other charts) on the Metrics worksheet
comes up; however, I'm getting a run-time error '1004':
Activate method of ChartObject class failed. Can
someone
help me correct this error?

There is also an Auto Open routine being run when the
workbook opens, located in Module1, with the following
code:

Sub Auto_Open()
Application.ScreenUpdating = False
Application.DisplayFullScreen = True
For Each ws In Worksheets
If ws.Visible = xlSheetVisible Then
ws.Select
Application.GoTo ws.Range("A1"), True
ActiveWindow.DisplayGridlines = False
End If
Next
Worksheets("Scorecard").Select
ThisWorkbook.Colors(7) = RGB(255, 124, 128)
Application.AutoPercentEntry = True
Application.ScreenUpdating = True
End Sub



.

Subscript out of range error
 

Most likely it means that you don't have a chart named "Chart 13"
Try this:

record a macro manually - just select your chart and stop recording. then
look at the macro code - what's the name of the chart? Send me a copy of the
macro if you like

RADO


"Phil Hageman" wrote in message
...
Hi RADO. Thanks for your reply. I entered your code
exactly as you have it here and now receive a run-time
error '9': "Subscript out of range." Is there more to
this?

Thanks, Phil
-----Original Message-----
Try to re-write your code this way:

Sub GoToMetric1()
With Charts("Chart 13")
.Height = 660
.Width = 780
.Top = 10
.Left = 125
.Activate
End With
End Sub

Make sure that the chart named "Chart 13" exists.

Good luck -
RADO


"Phil Hageman"
wrote in message
...
On a worksheet named Customer, is a command button
(among
other command buttons) with a macro named "GoToMetric1"
assigned to it. The macro code is located in Module2
and
the code is:

Sub GoToMetric1()
Sheets("Metrics").Select
Range("A1").Select
ActiveSheet.ChartObjects("Chart 13").Activate
With ActiveChart.Parent
.Height = 660 '660 X 780 is landscape ratio 77%
(8 1/2" x 11")
.Width = 780
.Top = 10
.Left = 125
End With
End Sub

On a worksheet named Metrics, are various charts, with
Chart 13 displaying data.

The intent is when the user clicks on the command
button,
Chart 13 (among other charts) on the Metrics worksheet
comes up; however, I'm getting a run-time error '1004':
Activate method of ChartObject class failed. Can
someone
help me correct this error?

There is also an Auto Open routine being run when the
workbook opens, located in Module1, with the following
code:

Sub Auto_Open()
Application.ScreenUpdating = False
Application.DisplayFullScreen = True
For Each ws In Worksheets
If ws.Visible = xlSheetVisible Then
ws.Select
Application.GoTo ws.Range("A1"), True
ActiveWindow.DisplayGridlines = False
End If
Next
Worksheets("Scorecard").Select
ThisWorkbook.Colors(7) = RGB(255, 124, 128)
Application.AutoPercentEntry = True
Application.ScreenUpdating = True
End Sub



.

Subscript out of range error
 

Phil,

try this:

Sub GoToMetric1()
With Sheets("Metrics").ChartObjects("Chart 13")
.Height = 660
.Width = 780
.Top = 10
.Left = 125
.Activate
End With
End Sub

Should work.

RADO

"Phil Hageman" wrote in message
...
Hi RADO. Thanks for your reply. I entered your code
exactly as you have it here and now receive a run-time
error '9': "Subscript out of range." Is there more to
this?

Thanks, Phil
-----Original Message-----
Try to re-write your code this way:

Sub GoToMetric1()
With Charts("Chart 13")
.Height = 660
.Width = 780
.Top = 10
.Left = 125
.Activate
End With
End Sub

Make sure that the chart named "Chart 13" exists.

Good luck -
RADO


"Phil Hageman"
wrote in message
...
On a worksheet named Customer, is a command button
(among
other command buttons) with a macro named "GoToMetric1"
assigned to it. The macro code is located in Module2
and
the code is:

Sub GoToMetric1()
Sheets("Metrics").Select
Range("A1").Select
ActiveSheet.ChartObjects("Chart 13").Activate
With ActiveChart.Parent
.Height = 660 '660 X 780 is landscape ratio 77%
(8 1/2" x 11")
.Width = 780
.Top = 10
.Left = 125
End With
End Sub

On a worksheet named Metrics, are various charts, with
Chart 13 displaying data.

The intent is when the user clicks on the command
button,
Chart 13 (among other charts) on the Metrics worksheet
comes up; however, I'm getting a run-time error '1004':
Activate method of ChartObject class failed. Can
someone
help me correct this error?

There is also an Auto Open routine being run when the
workbook opens, located in Module1, with the following
code:

Sub Auto_Open()
Application.ScreenUpdating = False
Application.DisplayFullScreen = True
For Each ws In Worksheets
If ws.Visible = xlSheetVisible Then
ws.Select
Application.GoTo ws.Range("A1"), True
ActiveWindow.DisplayGridlines = False
End If
Next
Worksheets("Scorecard").Select
ThisWorkbook.Colors(7) = RGB(255, 124, 128)
Application.AutoPercentEntry = True
Application.ScreenUpdating = True
End Sub



.