Compiler Error - Named Argument Not Found
 

I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002 v10.4524.4219
SP-2. I have transferred it to the other users in our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found" when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find the
proper syntax for other errors that may occur after this
one is fixed. Many thanks

Chris C.

Compiler Error - Named Argument Not Found
 

Chris,

Post the line of code that is causing the error.


--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002 v10.4524.4219
SP-2. I have transferred it to the other users in our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found" when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find the
proper syntax for other errors that may occur after this
one is fixed. Many thanks

Chris C.

Compiler Error - Named Argument Not Found
 

Hi Chris,

The only way to make this work reliably is to always do your final
compile and save in the earliest version of Excel that you plan to run your
program under. There were a number of Excel methods that were updated with
additional arguments between Excel 2000 and Excel 2002. If you don't
recognize the argument that's causing the problem and what it does, then
it's typically safe to assume that you can simply remove it. This will
eliminate the problem in Excel 2000 and that argument will simply assume its
default behavior in Excel 2002 (which is compatible with Excel 2000 in all
cases that I've come across).

--
Rob Bovey, MCSE, MCSD, Excel MVP
Application Professionals
http://www.appspro.com/

* Please post all replies to this newsgroup *
* I delete all unsolicited e-mail responses *


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002 v10.4524.4219
SP-2. I have transferred it to the other users in our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found" when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find the
proper syntax for other errors that may occur after this
one is fixed. Many thanks

Chris C.

Compiler Error - Named Argument Not Found
 

Chip,

Here it is. It hangs on the sort when it hits the
DataOption1:= please note that everything works like a
charm in Excel 2002.


Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("A4"), Order1:=xlAscending, Key2:=Range _
("B4"), Order2:=xlAscending, Key3:=Range("H4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1, MatchCase:=False,
Orientation:= _
xlTopToBottom, DataOption1:=xlSortNormal,
DataOption2:=xlSortNormal, _
DataOption3:=xlSortNormal

Thanks for looking.
Chris


-----Original Message-----
Chris,

Post the line of code that is causing the error.


--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002 v10.4524.4219
SP-2. I have transferred it to the other users in our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found" when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find the
proper syntax for other errors that may occur after this
one is fixed. Many thanks

Chris C.


.

Compiler Error - Named Argument Not Found
 

Chris,

The DataOption arguments were added in Excel 2002, so they won't work in
Excel 2000. Omit the arguments.

--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
Chip,

Here it is. It hangs on the sort when it hits the
DataOption1:= please note that everything works like a
charm in Excel 2002.


Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("A4"), Order1:=xlAscending, Key2:=Range _
("B4"), Order2:=xlAscending, Key3:=Range("H4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1, MatchCase:=False,
Orientation:= _
xlTopToBottom, DataOption1:=xlSortNormal,
DataOption2:=xlSortNormal, _
DataOption3:=xlSortNormal

Thanks for looking.
Chris


-----Original Message-----
Chris,

Post the line of code that is causing the error.


--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002 v10.4524.4219
SP-2. I have transferred it to the other users in our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found" when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find the
proper syntax for other errors that may occur after this
one is fixed. Many thanks

Chris C.


.

Compiler Error - Named Argument Not Found
 

Chip,

Thanks, it fixed that one but now it stops on
PrintQuality = 600 which may be unique to the print
setup. If so, how can I make this work universally.

The other hang up is on the line:
..PrintErrors = xlPrintErrorsDisplayed
But if delete it everything goes okay. The one I can't
get is how to make the PrintQuality a universal setting.

My whole routine is as follows:
Sub Print_Man_Hours_by_Division_Report()
'
' Print_Man_Hours_by_Division_Report Macro
' Macro recorded 9/4/2003 by J. Christopher Cantele
'
' Make sure the TimeSheet Sheet is active
Sheets("TimeSheet").Activate
'
Range("A4").Select
Selection.RemoveSubtotal
Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("F4"), Order1:=xlAscending, Key2:=Range _
("H4"), Order2:=xlAscending, Key3:=Range("B4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1,
MatchCase:=False, Orientation:= _
xlTopToBottom
Selection.Subtotal GroupBy:=6, Function:=xlSum,
TotalList:=Array(9), _
Replace:=True, PageBreaks:=False,
SummaryBelowData:=True
'Set up Page
Range("A4").Select
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$3"
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = _
"&""Times New Roman,Bold""&16QCI Marine Offshore
Man Hours by Division&""Times New Roman,Regular""&10" &
Chr(10) & ""
.RightHeader = ""
.LeftFooter = "&D"
.CenterFooter = "Page &P of &N"
.RightFooter = ""
.LeftMargin = Application.InchesToPoints(0.5)
.RightMargin = Application.InchesToPoints(0.5)
.TopMargin = Application.InchesToPoints(0.57)
.BottomMargin = Application.InchesToPoints(0.75)
.HeaderMargin = Application.InchesToPoints(0.25)
.FooterMargin = Application.InchesToPoints(0.25)
.PrintHeadings = False
.PrintGridlines = False
.PrintComments = xlPrintNoComments
.PrintQuality = 600
.CenterHorizontally = True
.CenterVertically = False
.Orientation = xlLandscape
.Draft = False
.PaperSize = xlPaperLetter
.FirstPageNumber = xlAutomatic
.Order = xlDownThenOver
.BlackAndWhite = False
.Zoom = 78
.PrintErrors = xlPrintErrorsDisplayed
End With

ActiveSheet.PageSetup.PrintArea = "=Offset(I1,,,CountA
(I:I),-9)"
ActiveSheet.PrintPreview

End Sub



-----Original Message-----
Chris,

The DataOption arguments were added in Excel 2002, so
they won't work in
Excel 2000. Omit the arguments.

--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
Chip,

Here it is. It hangs on the sort when it hits the
DataOption1:= please note that everything works like a
charm in Excel 2002.


Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("A4"), Order1:=xlAscending, Key2:=Range _
("B4"), Order2:=xlAscending, Key3:=Range("H4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1,
MatchCase:=False,
Orientation:= _
xlTopToBottom, DataOption1:=xlSortNormal,
DataOption2:=xlSortNormal, _
DataOption3:=xlSortNormal

Thanks for looking.
Chris


-----Original Message-----
Chris,

Post the line of code that is causing the error.


--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002
v10.4524.4219
SP-2. I have transferred it to the other users in
our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found"
when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find
the
proper syntax for other errors that may occur after
this
one is fixed. Many thanks

Chris C.


.



.

Compiler Error - Named Argument Not Found
 

Hi Chris,

The PrintQuality setting has been around for a long time, so that one is
not an Excel version problem. However, some printers don't support this
setting, so that may be the problem you're running into. Since 600 is the
default value for this property, it looks to me like you can remove this
setting as well without any problems.

--
Rob Bovey, MCSE, MCSD, Excel MVP
Application Professionals
http://www.appspro.com/

* Please post all replies to this newsgroup *
* I delete all unsolicited e-mail responses *


"Chris" wrote in message
...
Chip,

Thanks, it fixed that one but now it stops on
PrintQuality = 600 which may be unique to the print
setup. If so, how can I make this work universally.

The other hang up is on the line:
.PrintErrors = xlPrintErrorsDisplayed
But if delete it everything goes okay. The one I can't
get is how to make the PrintQuality a universal setting.

My whole routine is as follows:
Sub Print_Man_Hours_by_Division_Report()
'
' Print_Man_Hours_by_Division_Report Macro
' Macro recorded 9/4/2003 by J. Christopher Cantele
'
' Make sure the TimeSheet Sheet is active
Sheets("TimeSheet").Activate
'
Range("A4").Select
Selection.RemoveSubtotal
Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("F4"), Order1:=xlAscending, Key2:=Range _
("H4"), Order2:=xlAscending, Key3:=Range("B4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1,
MatchCase:=False, Orientation:= _
xlTopToBottom
Selection.Subtotal GroupBy:=6, Function:=xlSum,
TotalList:=Array(9), _
Replace:=True, PageBreaks:=False,
SummaryBelowData:=True
'Set up Page
Range("A4").Select
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$3"
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = _
"&""Times New Roman,Bold""&16QCI Marine Offshore
Man Hours by Division&""Times New Roman,Regular""&10" &
Chr(10) & ""
.RightHeader = ""
.LeftFooter = "&D"
.CenterFooter = "Page &P of &N"
.RightFooter = ""
.LeftMargin = Application.InchesToPoints(0.5)
.RightMargin = Application.InchesToPoints(0.5)
.TopMargin = Application.InchesToPoints(0.57)
.BottomMargin = Application.InchesToPoints(0.75)
.HeaderMargin = Application.InchesToPoints(0.25)
.FooterMargin = Application.InchesToPoints(0.25)
.PrintHeadings = False
.PrintGridlines = False
.PrintComments = xlPrintNoComments
.PrintQuality = 600
.CenterHorizontally = True
.CenterVertically = False
.Orientation = xlLandscape
.Draft = False
.PaperSize = xlPaperLetter
.FirstPageNumber = xlAutomatic
.Order = xlDownThenOver
.BlackAndWhite = False
.Zoom = 78
.PrintErrors = xlPrintErrorsDisplayed
End With

ActiveSheet.PageSetup.PrintArea = "=Offset(I1,,,CountA
(I:I),-9)"
ActiveSheet.PrintPreview

End Sub

Compiler Error - Named Argument Not Found
 

If you're not changing something in that print setup portion, comment it out (or
just delete it).

It'll make your macro a little faster (since it does less), too.

Chris wrote:

Chip,

Thanks, it fixed that one but now it stops on
PrintQuality = 600 which may be unique to the print
setup. If so, how can I make this work universally.

The other hang up is on the line:
.PrintErrors = xlPrintErrorsDisplayed
But if delete it everything goes okay. The one I can't
get is how to make the PrintQuality a universal setting.

My whole routine is as follows:
Sub Print_Man_Hours_by_Division_Report()
'
' Print_Man_Hours_by_Division_Report Macro
' Macro recorded 9/4/2003 by J. Christopher Cantele
'
' Make sure the TimeSheet Sheet is active
Sheets("TimeSheet").Activate
'
Range("A4").Select
Selection.RemoveSubtotal
Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("F4"), Order1:=xlAscending, Key2:=Range _
("H4"), Order2:=xlAscending, Key3:=Range("B4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1,
MatchCase:=False, Orientation:= _
xlTopToBottom
Selection.Subtotal GroupBy:=6, Function:=xlSum,
TotalList:=Array(9), _
Replace:=True, PageBreaks:=False,
SummaryBelowData:=True
'Set up Page
Range("A4").Select
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$3"
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = _
"&""Times New Roman,Bold""&16QCI Marine Offshore
Man Hours by Division&""Times New Roman,Regular""&10" &
Chr(10) & ""
.RightHeader = ""
.LeftFooter = "&D"
.CenterFooter = "Page &P of &N"
.RightFooter = ""
.LeftMargin = Application.InchesToPoints(0.5)
.RightMargin = Application.InchesToPoints(0.5)
.TopMargin = Application.InchesToPoints(0.57)
.BottomMargin = Application.InchesToPoints(0.75)
.HeaderMargin = Application.InchesToPoints(0.25)
.FooterMargin = Application.InchesToPoints(0.25)
.PrintHeadings = False
.PrintGridlines = False
.PrintComments = xlPrintNoComments
.PrintQuality = 600
.CenterHorizontally = True
.CenterVertically = False
.Orientation = xlLandscape
.Draft = False
.PaperSize = xlPaperLetter
.FirstPageNumber = xlAutomatic
.Order = xlDownThenOver
.BlackAndWhite = False
.Zoom = 78
.PrintErrors = xlPrintErrorsDisplayed
End With

ActiveSheet.PageSetup.PrintArea = "=Offset(I1,,,CountA
(I:I),-9)"
ActiveSheet.PrintPreview

End Sub

-----Original Message-----
Chris,

The DataOption arguments were added in Excel 2002, so
they won't work in
Excel 2000. Omit the arguments.

--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
Chip,

Here it is. It hangs on the sort when it hits the
DataOption1:= please note that everything works like a
charm in Excel 2002.


Range("=Offset(I4,,,CountA(I:I),-9)").Sort Key1:=Range
("A4"), Order1:=xlAscending, Key2:=Range _
("B4"), Order2:=xlAscending, Key3:=Range("H4"),
Order3:=xlAscending, _
Header:=xlGuess, OrderCustom:=1,
MatchCase:=False,
Orientation:= _
xlTopToBottom, DataOption1:=xlSortNormal,
DataOption2:=xlSortNormal, _
DataOption3:=xlSortNormal

Thanks for looking.
Chris


-----Original Message-----
Chris,

Post the line of code that is causing the error.


--
Cordially,
Chip Pearson
Microsoft MVP - Excel
www.cpearson.com


"Chris" wrote in message
...
I wrote a fairly elaborate spreadsheet with macros
throughtout. It was written in Excel 2002
v10.4524.4219
SP-2. I have transferred it to the other users in
our
office running Excel 2000 v9.0.6926 SP-3. We are
seeing "Compile Error" "Named argument Not Found"
when
try to run the macros. The debugger stops
on "DataOption1:=". Please tell me if any steps are
available to fix this without having to rewrite the
spreadsheet in a lower version and Where I can find
the
proper syntax for other errors that may occur after
this
one is fixed. Many thanks

Chris C.


.



.


--

Dave Peterson