Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Old January 11th 07, 03:15 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Jan 2007
Posts: 26
Default ho do i insert calendar into xls worksheet

Tried that already, same result, even tried it unloading the calendar add-in

"Ron de Bruin" wrote:

Close Excel
Start Excel again and try the code from my site in a new workbook

--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message news
Thanks, but still no matter where I click in the sheet I get the same

error 424 & highlights the line:

Calendar1.Left = Target.Left + Target.Width - Calendar1.Width


"Ron de Bruin" wrote:

Calendar1 is the name of your calendar

When you are in Edit mode you can see and edit the name in the formulabar on the left
Be sure that it is named Calendar1


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message news Still won't work for me, I'm not sure how to identify the range (it's column A)

But clicking anywhere in the sheet after I have added your code to the
worksheet gives me error 424.

& highlights the line:

Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

I don't know what I am doing wrong.

"Ron de Bruin" wrote:

Change the range in the code to the range with your date cells

See also this note on my site

Note: you can use this if your range is not one area
If Not Application.Intersect(Range("A1:A20,C1,E1"), Target) Is Nothing Then


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message ...
I am trying to get the calendar to pop up everytime you are in the date
column... to help the user get it in in the right format.

Is that possible?

"Ron de Bruin" wrote:

Hi

When you use the code from my page you only have to add the calendar to the worksheet
with Insert Object

Read the page again
http://www.rondebruin.nl/calendar.htm



--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message ...
How do you tell what the calendar is named?

I tried just using calendar.... but that didn't work either.

I folled the instructions on this page:
http://www.fontstuff.com/vba/vbatut07.htm

& then I inserted this code on the sheet:

Private Sub Calendar1_Click()
ActiveCell.Value = CDbl(Calendar1.Value)
ActiveCell.NumberFormat = "mm/dd/yyyy"
ActiveCell.Select
End Sub

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count 1 Then Exit Sub
If Not Application.Intersect(Range("A1:A20"), Target) Is Nothing Then
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
Calendar1.Top = Target.Top + Target.Height
Calendar1.Visible = True
' select Today's date in the Calendar
Calendar1.Value = Date
ElseIf Calendar1.Visible Then Calendar1.Visible = False
End If
End Sub
.

"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...













  #42   Report Post  
Old January 11th 07, 03:23 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Jul 2006
Posts: 11,123
Default ho do i insert calendar into xls worksheet

Send me your test workbook private and i look at it

--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message ...
Tried that already, same result, even tried it unloading the calendar add-in

"Ron de Bruin" wrote:

Close Excel
Start Excel again and try the code from my site in a new workbook

--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message news
Thanks, but still no matter where I click in the sheet I get the same

error 424 & highlights the line:

Calendar1.Left = Target.Left + Target.Width - Calendar1.Width


"Ron de Bruin" wrote:

Calendar1 is the name of your calendar

When you are in Edit mode you can see and edit the name in the formulabar on the left
Be sure that it is named Calendar1


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message news Still won't work for me, I'm not sure how to identify the range (it's column A)

But clicking anywhere in the sheet after I have added your code to the
worksheet gives me error 424.

& highlights the line:

Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

I don't know what I am doing wrong.

"Ron de Bruin" wrote:

Change the range in the code to the range with your date cells

See also this note on my site

Note: you can use this if your range is not one area
If Not Application.Intersect(Range("A1:A20,C1,E1"), Target) Is Nothing Then


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message ...
I am trying to get the calendar to pop up everytime you are in the date
column... to help the user get it in in the right format.

Is that possible?

"Ron de Bruin" wrote:

Hi

When you use the code from my page you only have to add the calendar to the worksheet
with Insert Object

Read the page again
http://www.rondebruin.nl/calendar.htm



--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"tmirelle" wrote in message
...
How do you tell what the calendar is named?

I tried just using calendar.... but that didn't work either.

I folled the instructions on this page:
http://www.fontstuff.com/vba/vbatut07.htm

& then I inserted this code on the sheet:

Private Sub Calendar1_Click()
ActiveCell.Value = CDbl(Calendar1.Value)
ActiveCell.NumberFormat = "mm/dd/yyyy"
ActiveCell.Select
End Sub

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count 1 Then Exit Sub
If Not Application.Intersect(Range("A1:A20"), Target) Is Nothing Then
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
Calendar1.Top = Target.Top + Target.Height
Calendar1.Visible = True
' select Today's date in the Calendar
Calendar1.Value = Date
ElseIf Calendar1.Visible Then Calendar1.Visible = False
End If
End Sub
.

"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message
...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...













  #43   Report Post  
Old January 31st 07, 06:38 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Dec 2006
Posts: 258
Default ho do i insert calendar into xls worksheet

Hi Ron;
I sorry to bother you again, but I want to make work the calendar in other
computer and does not work.
I noticed that this computer does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE".
Can you tell me how can I add this calendar control in excel?

Thanks in advance.
Maperalia

"Ron de Bruin" wrote:

hi maperalia

If you go in Edit mode (button on the control toolbox toolbar) and select the calendar you can see the name in the formulabar.
You can change it there also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"maperalia" wrote in message ...
Ron;
I got the same error message that Drahos had.
What do you mean with "Maybe the Calendar you have add to the worksheet is
not named Calendar1". How and where can I change this name?

Thanks in advance.
Maperalia



"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...










  #44   Report Post  
Old January 31st 07, 07:20 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Jul 2006
Posts: 11,123
Default ho do i insert calendar into xls worksheet

Hi maperalia

See my page
http://www.rondebruin.nl/calendar.htm

You find a link there where you can download the control


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Hi Ron;
I sorry to bother you again, but I want to make work the calendar in other
computer and does not work.
I noticed that this computer does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE".
Can you tell me how can I add this calendar control in excel?

Thanks in advance.
Maperalia

"Ron de Bruin" wrote:

hi maperalia

If you go in Edit mode (button on the control toolbox toolbar) and select the calendar you can see the name in the formulabar.
You can change it there also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"maperalia" wrote in message ...
Ron;
I got the same error message that Drahos had.
What do you mean with "Maybe the Calendar you have add to the worksheet is
not named Calendar1". How and where can I change this name?

Thanks in advance.
Maperalia



"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...










  #45   Report Post  
Old January 31st 07, 08:21 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Dec 2006
Posts: 258
Default ho do i insert calendar into xls worksheet

Ron;
Thanks for your quick respond.
I have the program load it in the "P" drive. The calendar is working in all
computers except one. This one does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE". I wonder how can I load it in
this computer to make run the program.

Thanks.
Maperalia

"Ron de Bruin" wrote:

Hi maperalia

See my page
http://www.rondebruin.nl/calendar.htm

You find a link there where you can download the control


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Hi Ron;
I sorry to bother you again, but I want to make work the calendar in other
computer and does not work.
I noticed that this computer does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE".
Can you tell me how can I add this calendar control in excel?

Thanks in advance.
Maperalia

"Ron de Bruin" wrote:

hi maperalia

If you go in Edit mode (button on the control toolbox toolbar) and select the calendar you can see the name in the formulabar.
You can change it there also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"maperalia" wrote in message ...
Ron;
I got the same error message that Drahos had.
What do you mean with "Maybe the Calendar you have add to the worksheet is
not named Calendar1". How and where can I change this name?

Thanks in advance.
Maperalia



"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...













  #46   Report Post  
Old January 31st 07, 08:29 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Jul 2006
Posts: 11,123
Default ho do i insert calendar into xls worksheet

Cick on this link on my site and then read this

http://www.fontstuff.com/mailbag/qvba01.htm



--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Ron;
Thanks for your quick respond.
I have the program load it in the "P" drive. The calendar is working in all
computers except one. This one does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE". I wonder how can I load it in
this computer to make run the program.

Thanks.
Maperalia

"Ron de Bruin" wrote:

Hi maperalia

See my page
http://www.rondebruin.nl/calendar.htm

You find a link there where you can download the control


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Hi Ron;
I sorry to bother you again, but I want to make work the calendar in other
computer and does not work.
I noticed that this computer does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE".
Can you tell me how can I add this calendar control in excel?

Thanks in advance.
Maperalia

"Ron de Bruin" wrote:

hi maperalia

If you go in Edit mode (button on the control toolbox toolbar) and select the calendar you can see the name in the formulabar.
You can change it there also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"maperalia" wrote in message ...
Ron;
I got the same error message that Drahos had.
What do you mean with "Maybe the Calendar you have add to the worksheet is
not named Calendar1". How and where can I change this name?

Thanks in advance.
Maperalia



"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...












  #47   Report Post  
Old January 31st 07, 09:10 PM posted to microsoft.public.excel.misc
external usenet poster
 
First recorded activity by ExcelBanter: Dec 2006
Posts: 258
Default ho do i insert calendar into xls worksheet

Ron;
Thank you help. I really appreciatte.

Maperalia

"Ron de Bruin" wrote:

Cick on this link on my site and then read this

http://www.fontstuff.com/mailbag/qvba01.htm



--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Ron;
Thanks for your quick respond.
I have the program load it in the "P" drive. The calendar is working in all
computers except one. This one does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE". I wonder how can I load it in
this computer to make run the program.

Thanks.
Maperalia

"Ron de Bruin" wrote:

Hi maperalia

See my page
http://www.rondebruin.nl/calendar.htm

You find a link there where you can download the control


--

Regards Ron de Bruin
http://www.rondebruin.nl/tips.htm


"maperalia" wrote in message ...
Hi Ron;
I sorry to bother you again, but I want to make work the calendar in other
computer and does not work.
I noticed that this computer does not have the "calendar control" under the
menu Insert/Object/Create New/"OBJECT TYPE".
Can you tell me how can I add this calendar control in excel?

Thanks in advance.
Maperalia

"Ron de Bruin" wrote:

hi maperalia

If you go in Edit mode (button on the control toolbox toolbar) and select the calendar you can see the name in the formulabar.
You can change it there also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"maperalia" wrote in message ...
Ron;
I got the same error message that Drahos had.
What do you mean with "Maybe the Calendar you have add to the worksheet is
not named Calendar1". How and where can I change this name?

Thanks in advance.
Maperalia



"Ron de Bruin" wrote:

Hi Drahos

Maybe the Calendar you have add to the worksheet is not named
Calendar1

Check out the name

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Drahos" wrote in message ...
Hi Paul,
I need to use in my Excel Form a calender as described. I have done what
was recommeded on the webside you are reffering to. While choosing a cell
from the range where should be the calendar I receive the Runtime error "424"
- object required and the Debug shows this line:
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width

If choosing a cell outside of the range I receive the same runtime error and
the Debug shows this line:

ElseIf Calendar1.Visible Then Calendar1.Visible = False

I use the Excel 2003.

Please, can you advice me what the problem is.
Thanks a lot.


"Paul B" wrote:

halina, here is one way,
http://www.rondebruin.nl/calendar.htm
--
Paul B
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always appreciated!
Using Excel 2002 & 2003


"halina" wrote in message
...















Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Search a worksheet, extract rows using a list from another sheet bobf Excel Discussion (Misc queries) 9 August 31st 05 04:56 AM
Insert a new worksheet after subtotal KReese Excel Worksheet Functions 1 July 20th 05 10:35 PM
Insert comment in protected worksheet The Tuner Excel Worksheet Functions 2 June 6th 05 11:38 PM
Insert worksheet is greyed out, is there an option to turn it on? jwolf Excel Worksheet Functions 1 May 9th 05 11:22 PM
Indirect reference from one worksheet to another Bill Sturdevant Excel Worksheet Functions 2 December 17th 04 01:23 PM


All times are GMT +1. The time now is 09:51 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 ExcelBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Excel"

 

Copyright © 2017