ExcelBanter

ExcelBanter (https://www.excelbanter.com/)
-   Excel Discussion (Misc queries) (https://www.excelbanter.com/excel-discussion-misc-queries/)
-   -   Resizing columns with a macro (https://www.excelbanter.com/excel-discussion-misc-queries/235220-resizing-columns-macro.html)

belvy123

Resizing columns with a macro
 
Hi All

I am using the following macro to resize columns as well as hide several
columns
however there is one column that i want to be a differnet size "7.51 width"
as stated un the macro. But when I run the script it sizes all columns the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers

JLatham

Resizing columns with a macro
 
I ran your code in Excel 2003 and it works for me (other than the oddity that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide several
columns
however there is one column that i want to be a differnet size "7.51 width"
as stated un the macro. But when I run the script it sizes all columns the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers


belvy123

Resizing columns with a macro
 
I am using 2007 at work which is where I am at now and 2003 at home and have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the oddity that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide several
columns
however there is one column that i want to be a differnet size "7.51 width"
as stated un the macro. But when I run the script it sizes all columns the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers


Rick Rothstein

Resizing columns with a macro
 
I'm not sure what to tell you about your "not working" problem... like
JLatham, I get your code to work fine on my system also; with the same
inability to set Column A to exactly 7.51 (this has to do with column width
needing to be a whole number of pixels wide).

While the following should not do anything to fix your problem, I did want
to point out to you that there is no need for you to keep selecting ranges
in order to work on them. Your eleven posted lines of code can be reduced to
these three lines of code...

Range("a:a").ColumnWidth = 7.51
Range("b:k,o:s").ColumnWidth = 17.57
Range("c:c,e:e,g:g,l:l,n:n").EntireColumn.Hidden = True

--
Rick (MVP - Excel)


"belvy123" wrote in message
...
I am using 2007 at work which is where I am at now and 2003 at home and
have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the oddity
that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't
set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide
several
columns
however there is one column that i want to be a differnet size "7.51
width"
as stated un the macro. But when I run the script it sizes all columns
the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers



Jacob Skaria

Resizing columns with a macro
 
Please double check your below statement. Try running the code again and
check the width of ColA.

"But when I run the script it sizes all columns the same 17.57"

The code works as it is in both version of XL; with col A with reduced
width. When you set the width to 7.51 width (that means 7.51 characters
long). The width actually adjusts to the next pixel. For example when you try
to fix the width at 7.51 it adjust it to the next unit which is 7.57. This
happens why because excel adjust the width to the nearest pixel . In pixels
54,55,56,57,58 etc; would get converted to 7.00, 7.14, 7.29, 7.43, 7.57
characters. Please check the below link to understand how the measurement
works

http://office.microsoft.com/en-us/ex...517241033.aspx

Additionally, you dont need to select to change the column width.

Columns("a").ColumnWidth = 7.51
Columns("b:k").ColumnWidth = 17.57
Columns("o:s").ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True

If this post helps click Yes
---------------
Jacob Skaria


"belvy123" wrote:

I am using 2007 at work which is where I am at now and 2003 at home and have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the oddity that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide several
columns
however there is one column that i want to be a differnet size "7.51 width"
as stated un the macro. But when I run the script it sizes all columns the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers


belvy123

Resizing columns with a macro
 
HJ LATHAM

I input the condensed code you gave me and all is well it works fine now
Crazy man I tell ya

Thanks
--
cruchnin numbers


"Rick Rothstein" wrote:

I'm not sure what to tell you about your "not working" problem... like
JLatham, I get your code to work fine on my system also; with the same
inability to set Column A to exactly 7.51 (this has to do with column width
needing to be a whole number of pixels wide).

While the following should not do anything to fix your problem, I did want
to point out to you that there is no need for you to keep selecting ranges
in order to work on them. Your eleven posted lines of code can be reduced to
these three lines of code...

Range("a:a").ColumnWidth = 7.51
Range("b:k,o:s").ColumnWidth = 17.57
Range("c:c,e:e,g:g,l:l,n:n").EntireColumn.Hidden = True

--
Rick (MVP - Excel)


"belvy123" wrote in message
...
I am using 2007 at work which is where I am at now and 2003 at home and
have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the oddity
that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't
set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide
several
columns
however there is one column that i want to be a differnet size "7.51
width"
as stated un the macro. But when I run the script it sizes all columns
the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers




Rick Rothstein

Resizing columns with a macro
 
Really? It works now? Hmm, I'm not sure what to tell you about that either;
but I am glad you have it working now (I just wish I understood why your
other code didn't work for you when it worked for the rest of us... I hate
mysteries like this).

--
Rick (MVP - Excel)


"belvy123" wrote in message
...
HJ LATHAM

I input the condensed code you gave me and all is well it works fine now
Crazy man I tell ya

Thanks
--
cruchnin numbers


"Rick Rothstein" wrote:

I'm not sure what to tell you about your "not working" problem... like
JLatham, I get your code to work fine on my system also; with the same
inability to set Column A to exactly 7.51 (this has to do with column
width
needing to be a whole number of pixels wide).

While the following should not do anything to fix your problem, I did
want
to point out to you that there is no need for you to keep selecting
ranges
in order to work on them. Your eleven posted lines of code can be reduced
to
these three lines of code...

Range("a:a").ColumnWidth = 7.51
Range("b:k,o:s").ColumnWidth = 17.57
Range("c:c,e:e,g:g,l:l,n:n").EntireColumn.Hidden = True

--
Rick (MVP - Excel)


"belvy123" wrote in message
...
I am using 2007 at work which is where I am at now and 2003 at home and
have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the
oddity
that
column A actually turns out to be 7.57 vs 7.51 wide). I found I
couldn't
set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide
several
columns
however there is one column that i want to be a differnet size "7.51
width"
as stated un the macro. But when I run the script it sizes all
columns
the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers





JLatham

Resizing columns with a macro
 
Thanks for that link - I was trying to find that (or any) explanation of how
the width setting worked, but it was just too late in the day for me to hunt
enough.

"Jacob Skaria" wrote:

Please double check your below statement. Try running the code again and
check the width of ColA.

"But when I run the script it sizes all columns the same 17.57"

The code works as it is in both version of XL; with col A with reduced
width. When you set the width to 7.51 width (that means 7.51 characters
long). The width actually adjusts to the next pixel. For example when you try
to fix the width at 7.51 it adjust it to the next unit which is 7.57. This
happens why because excel adjust the width to the nearest pixel . In pixels
54,55,56,57,58 etc; would get converted to 7.00, 7.14, 7.29, 7.43, 7.57
characters. Please check the below link to understand how the measurement
works

http://office.microsoft.com/en-us/ex...517241033.aspx

Additionally, you dont need to select to change the column width.

Columns("a").ColumnWidth = 7.51
Columns("b:k").ColumnWidth = 17.57
Columns("o:s").ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True

If this post helps click Yes
---------------
Jacob Skaria


"belvy123" wrote:

I am using 2007 at work which is where I am at now and 2003 at home and have
the samme resluts at each???
very perplexing. I want to fix it but not sure what to do now??
anyone else have any ideas???
--
cruchnin numbers


"JLatham" wrote:

I ran your code in Excel 2003 and it works for me (other than the oddity that
column A actually turns out to be 7.57 vs 7.51 wide). I found I couldn't set
it to 7.51 manually either.

"belvy123" wrote:

Hi All

I am using the following macro to resize columns as well as hide several
columns
however there is one column that i want to be a differnet size "7.51 width"
as stated un the macro. But when I run the script it sizes all columns the
same 17.57
how is it doing this and what do I need to do to rectify this.
below is the macro

thanks

Columns("a").Select
Selection.ColumnWidth = 7.51
Columns("b:k").Select
Selection.ColumnWidth = 17.57
Columns("o:s").Select
Selection.ColumnWidth = 17.57
Columns("c").Hidden = True
Columns("e").Hidden = True
Columns("g").Hidden = True
Columns("l").Hidden = True
Columns("n").Hidden = True
End Sub
--


Thanks
crunchin numbers



All times are GMT +1. The time now is 06:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ExcelBanter.com