ExcelBanter

ExcelBanter (https://www.excelbanter.com/)
-   Excel Discussion (Misc queries) (https://www.excelbanter.com/excel-discussion-misc-queries/)
-   -   Posting---If function problem again (https://www.excelbanter.com/excel-discussion-misc-queries/219534-posting-if-function-problem-again.html)

chrisnsmith
Posting---If function problem again
 
Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With


This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

Sheeloo[_3_]
Posting---If function problem again
 
Previous post was not complete...

I tested the following macro after entering 2/13/2009 in B13 and it showed
the message "If is OK"

Try it
Sub Test()
If Weekday(Date, vbMonday) = 5 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
Msgbox "IF is OK"
'With Sheets("Cus Futures")
' .Range(" H9:I50").Copy Range("D9:E50")
' .Range("F9:I50").ClearContents
Range("M2") = Date
'End With
End Sub


"Sheeloo" wrote:

Use call My_Procedure instead of Go to My_Procedure

"chrisnsmith" wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With


This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

Sheeloo[_3_]
Posting---If function problem again
 
Use call My_Procedure instead of Go to My_Procedure

"chrisnsmith" wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With


This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

Sheeloo[_3_]
Posting---If function problem again
 
Previous post was not complete...
I meant put the statements after My_Procedure in a SUB and then call that SUB.
I tested the following macro after entering 2/13/2009 in B13 and it showed
the message "If is OK"

Try it
Sub Test()
If Weekday(Date, vbMonday) = 5 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
Msgbox "IF is OK"
'With Sheets("Cus Futures")
' .Range(" H9:I50").Copy Range("D9:E50")
' .Range("F9:I50").ClearContents
Range("M2") = Date
'End With
End Sub


"Sheeloo" wrote:

Use call My_Procedure instead of Go to My_Procedure

"chrisnsmith" wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With


This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

Dave Peterson
Posting---If function problem again
 
I would use Call and I'd qualify all those unqualified ranges:

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 3 Then
Call My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 1 Then
Call My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range("H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9:E50")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

======
Change all those sheet names to what they need to be.

chrisnsmith wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

--

Dave Peterson

chrisnsmith
Posting---If function problem again
 
Hopefully this will be my last question regarding this project.
When I run this code I get the message Sub or Function not defined.
I'm a Visual Basic dummy and trying to work thru this thing.
What is the process for defining My_Procedure?

"Dave Peterson" wrote:

I would use Call and I'd qualify all those unqualified ranges:

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 3 Then
Call My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 1 Then
Call My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range("H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9:E50")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

======
Change all those sheet names to what they need to be.

chrisnsmith wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

--

Dave Peterson

Dave Peterson
Posting---If function problem again
 
Sub My_Procedure()
'do stuff with your code.
End Sub




chrisnsmith wrote:

Hopefully this will be my last question regarding this project.
When I run this code I get the message Sub or Function not defined.
I'm a Visual Basic dummy and trying to work thru this thing.
What is the process for defining My_Procedure?

"Dave Peterson" wrote:

I would use Call and I'd qualify all those unqualified ranges:

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 3 Then
Call My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 1 Then
Call My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range("H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9:E50")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

======
Change all those sheet names to what they need to be.

chrisnsmith wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

--

Dave Peterson


--

Dave Peterson

chrisnsmith
Posting---If function problem again
 
I assumed you meant to place my_procedure in a separate module.
When I do that I get the message Else without an If.

"Dave Peterson" wrote:

Sub My_Procedure()
'do stuff with your code.
End Sub




chrisnsmith wrote:

Hopefully this will be my last question regarding this project.
When I run this code I get the message Sub or Function not defined.
I'm a Visual Basic dummy and trying to work thru this thing.
What is the process for defining My_Procedure?

"Dave Peterson" wrote:

I would use Call and I'd qualify all those unqualified ranges:

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 3 Then
Call My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 1 Then
Call My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range("H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9:E50")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

======
Change all those sheet names to what they need to be.

chrisnsmith wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

--

Dave Peterson


--

Dave Peterson

smartin
Posting---If function problem again
 
chrisnsmith wrote:
Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.
Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub


F1 on IF.

If you code

If a Then [statements]

everything must appear on one line, and no EndIf is used.

Use the "block" syntax" instead:

If a Then
b
ElseIf c Then
d
Else
e
EndIf

Dave Peterson
Posting---If function problem again
 
I didn't see anything that would cause that error in My_Procedure from what
you've posted. And the code I suggested for the workbook_open won't cause that
error.

Maybe it's time to share your code again. And indicate where the error occurs.

And since this is related to the workbook_Open event (and won't be called by any
other routine????), you could keep it in the ThisWorkbook module.



chrisnsmith wrote:

I assumed you meant to place my_procedure in a separate module.
When I do that I get the message Else without an If.

"Dave Peterson" wrote:

Sub My_Procedure()
'do stuff with your code.
End Sub




chrisnsmith wrote:

Hopefully this will be my last question regarding this project.
When I run this code I get the message Sub or Function not defined.
I'm a Visual Basic dummy and trying to work thru this thing.
What is the process for defining My_Procedure?

"Dave Peterson" wrote:

I would use Call and I'd qualify all those unqualified ranges:

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 3 Then
Call My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 _
And worksheets("Somesheetnamehere").Cells(1, 1).value = Date - 1 Then
Call My_Procedure
End If
End Sub


My_Procedu
With Sheets("Cus Futures")
.Range("H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy _
destination:=worksheets("Someotherenamehere").Rang e("D9:E50")
.Range("F9:I50").ClearContents
worksheets("Someotherenamehere").Range("M2").value = Date
End With

======
Change all those sheet names to what they need to be.

chrisnsmith wrote:

Can someone explain to me why my Excel 2003 is not recognizing ( If )?
I've tried several codes with the If function and my code won't run.

The responses I received from my previous post asked that I post my code.

This is the If...EndIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(13, 2) = Date - 3 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

This is the If...ElseIf code.

Private Sub Workbook_Open()
If Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 3 Then GoTo
My_Procedure
ElseIf Weekday(Date, vbMonday) = 2 And Cells(1, 1) = Date - 1 Then GoTo
My_Procedure
End If
End Sub

My_Procedu
With Sheets("Cus Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

'
'
With Sheets("House Futures")
.Range(" H9:I50").Copy Range("D9:E50")
.Range("F9:I50").ClearContents
Range("M2") = Date
End With

--

Dave Peterson


--

Dave Peterson


--

Dave Peterson


All times are GMT +1. The time now is 02:18 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
ExcelBanter.com