|
Hide ALL dropdowns on autofilter
After the code below. I want to hide all the dropdown auto filter arrows on
each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub |
Hide ALL dropdowns on autofilter
Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he
http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson |
Hide ALL dropdowns on autofilter
Thanks so much can you help with this post.
maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson |
Hide ALL dropdowns on autofilter
Did you mean to reply in your thread about hiding the dropdown arrows in the
autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
yes i was wondering if u could help with this. No one can help me it seems
"Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
You can use a range/list on another worksheet if you name that range.
See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
And I see that you posted another time in a different newsgroup.
I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Dave I really appreciate your help. Yes I did post to another, but it is not
helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Did you try the =vlookup() formula?
Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
yes i did, but I keep getting errors in the list validation setup window,
when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
You can't have a validation list and a formula in the same cell, Dave meant
in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Okay can you tell me another way to do what I need to do?
I want a list box, I want to choose from column a from another sheet, I want to populate the same cell with the corresponding row from column b. Is this possible? "Peo Sjoblom" wrote: You can't have a validation list and a formula in the same cell, Dave meant in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Hi Kenny
You will find the answer on Debra Dalgleish's site. Take a look at dependent dropdown lists http://www.contextures.com/xlDataVal13.html#Depend -- Regards Roger Govier "Kenny" wrote in message ... Okay can you tell me another way to do what I need to do? I want a list box, I want to choose from column a from another sheet, I want to populate the same cell with the corresponding row from column b. Is this possible? "Peo Sjoblom" wrote: You can't have a validation list and a formula in the same cell, Dave meant in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
If you're using xl97, then this won't work.
I created a named range called myList that was used for the data|validation rules. I rightclicked on the worksheet tab that held the cell with data|validation. I selected View Code and pasted this into the code window: Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) Dim res As Variant 'on cell at a time If Target.Cells.Count 1 Then Exit Sub 'only look at A1 -- where the data|validation cell is If Intersect(Target, Me.Range("a1")) Is Nothing Then Exit Sub On Error GoTo errHandler: res = Application.VLookup(Target.Value, _ Worksheets("sheet2").Range("mylist").Resize(, 2), 2, False) Application.EnableEvents = False If IsError(res) Then 'this shouldn't happen Target.Value = "Missing" Else Target.Value = res End If errHandler: Application.EnableEvents = True End Sub ======= Change A1 to the cell's address that has that data|validation. If you're new to macros, you may want to read David McRitchie's intro at: http://www.mvps.org/dmcritchie/excel/getstarted.htm Chip Pearson has some instructions on events: http://www.cpearson.com/excel/Events.aspx David McRitchie has some notes, too: http://www.mvps.org/dmcritchie/excel/event.htm And the macro will not work if the user disables macros or disables events. Kenny wrote: Okay can you tell me another way to do what I need to do? I want a list box, I want to choose from column a from another sheet, I want to populate the same cell with the corresponding row from column b. Is this possible? "Peo Sjoblom" wrote: You can't have a validation list and a formula in the same cell, Dave meant in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Ps. I'd really use a different cell. I think it makes things easier and less
prone to failure (when macros or events are disabled (for instance)). Kenny wrote: Okay can you tell me another way to do what I need to do? I want a list box, I want to choose from column a from another sheet, I want to populate the same cell with the corresponding row from column b. Is this possible? "Peo Sjoblom" wrote: You can't have a validation list and a formula in the same cell, Dave meant in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
Hide ALL dropdowns on autofilter
Thanks so much for the help!
"Dave Peterson" wrote: Ps. I'd really use a different cell. I think it makes things easier and less prone to failure (when macros or events are disabled (for instance)). Kenny wrote: Okay can you tell me another way to do what I need to do? I want a list box, I want to choose from column a from another sheet, I want to populate the same cell with the corresponding row from column b. Is this possible? "Peo Sjoblom" wrote: You can't have a validation list and a formula in the same cell, Dave meant in another cell -- Regards, Peo Sjoblom "Kenny" wrote in message ... yes i did, but I keep getting errors in the list validation setup window, when I try to use that in the formula "Dave Peterson" wrote: Did you try the =vlookup() formula? Kenny wrote: Dave I really appreciate your help. Yes I did post to another, but it is not helping me. They always refer me to this site, but the answer is not contained in this site. I know how to create a list validation fromt sheet 2, here is the issue. Column A in sheet 2 has the list of items i want to select from, column b has the info I want to pop into the cell i use the list validation on. IE: Sheet2 Column A Column B Cabbage Green Squash Yellow Egg Plant Black The list validation will show the list off column a, but when I select that vegie it will pop the color into the cell. I only want one list box.... Thanks "Dave Peterson" wrote: And I see that you posted another time in a different newsgroup. I'll drop out of this discussion. Good luck. Dave Peterson wrote: You can use a range/list on another worksheet if you name that range. See Debra Dalgleish's site: http://contextures.com/xlDataVal01.html I don't understand the second part of your question. If you meant you wanted to retrieve a value from column B, you could use something like: =if(a2="","",vlookup(a2,sheet2!a:b,2,false)) Where A2 held the dropdown of the available choices. Kenny wrote: yes i was wondering if u could help with this. No one can help me it seems "Dave Peterson" wrote: Did you mean to reply in your thread about hiding the dropdown arrows in the autofilter range? Kenny wrote: Thanks so much can you help with this post. maybe i am not explaining this well enough sorry. I am using a list validation on the cell in sheet 1. I want to click on the drop down and it show a list inside the drop down that matches column a on sheet 2, when I click on a choice it will actually populate the cell with the corresponind choice in column b from sheet 2. You can not use sheet references in the list validation formula. I have the data range in colum a labled as CodeDescription I have column B labled as Code and both columns together labled as CodeTable.... Is this possible? Also I would like the formula to suppress blank spots that may be contained in a or b offset? Thanks! "Joel" wrote: did you include the sheet number as below =MATCH(sheet2!$A$1,sheet2!$A$2:$A$100) "Kenny" wrote: this does not work, the list validation needs to refernce sheet2 not sheet 1, i get an error with your code "Joel" wrote: You have to use match. If the table starts in row 1 then =MATCH($A$1,$A$2:$A$100) if the table starts in some other row then =MATCH($A$10,$A$2:$A$100)-ROW($A$10)+1 Match will give you the index number into the array. So if you know the row number of the first member (row(A10)) then you simply add the index return by match to the starting row number. "Kenny" wrote: sheet1 cell I3, I want to creat a LIST VALIDATION, when the drop down is selected it will show sheet2 column A choices, no biggie so far, but based on the list validation choice, I want it to return the value in the corresponding row in sheet2 column b in cell I3 IE: Sheet 2 Column A Column B Hard Drive 2 Monitor 3 keyboard 4 sheet 1 cell I3 list validation shows column a choices, I select hard drive it will put a 2 in cell I3 not Hard Drive???? Also I have looked at contextures code and still cannot figure this out, please tell me what i need to put in the code list validation bax, thanks so much "Dave Peterson" wrote: Debra Dalgleish shows how to hide the dropdown arrows for Autofilter he http://contextures.com/xlautofilter03.html#Hide Kenny wrote: After the code below. I want to hide all the dropdown auto filter arrows on each column, but I want the filter I applied to stay??? Private Sub Band3_Click() AutoFilterMode = False Worksheets("Tracker").Range("A2").AutoFilter Field:=3, Criteria1:="Band 3" Worksheets("Tracker").Range("A2").AutoFilter Field:=12, Criteria1:="=" 'AutoFilterMode = False End Sub -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson -- Dave Peterson |
| All times are GMT +1. The time now is 04:28 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ExcelBanter.com