Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
I have an excel sheet with three worksheets.
1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
#2
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
If you want to use the contents in Template!V5 to get a variable you can use
INDIRECT but how you apply it depends on what you want to type into V5, if you want to type NetData!A1 into Template!V5 you can use =DSUM(NetData!A1:K313,INDIRECT(Template!V5),NetDat a!L1:L2) if you want to type in the criteria range into Template!V5 you can use =DSUM(NetData!A1:K313,"LENGTH",INDIRECT(Template!V 5)) with NetData!L1:L2 in V5 it will return the same as in your first example I assumed you have a header in A1, anyway INDIRECT would be the way to g -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... I have an excel sheet with three worksheets. 1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
#3
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
Hi Peo,
It didn't answer my question. I think you got it all wrong. The problem was not in the "LENGTH". I want to sum up the column with the field name "LENGTH" but the problem lies in defining the criteria. I don't know how to write a criteria that one of the field name (here "AASEGNO") is equal to the some value from other sheet (here Template!V5). The four ways that I was trying to get it, only the first way works because I specify the cells NetData!L1 as AASEGNO and NetData!L2 as MTH101 which is there occurs three times in the database NetData!A1:K313). Can anybody help me out constructing this criteria in which one of the variable "AASEGNO" from the database NetData!A1:K313 is equal to some other linked cell value at Template!V5? AA "Peo Sjoblom" wrote: If you want to use the contents in Template!V5 to get a variable you can use INDIRECT but how you apply it depends on what you want to type into V5, if you want to type NetData!A1 into Template!V5 you can use =DSUM(NetData!A1:K313,INDIRECT(Template!V5),NetDat a!L1:L2) if you want to type in the criteria range into Template!V5 you can use =DSUM(NetData!A1:K313,"LENGTH",INDIRECT(Template!V 5)) with NetData!L1:L2 in V5 it will return the same as in your first example I assumed you have a header in A1, anyway INDIRECT would be the way to g -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... I have an excel sheet with three worksheets. 1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
#4
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
OK, if it would work with AASEGNO in L1 and criteria in L2 you want to know
how you can replace the criteria and use V5 instead? If so leave L1 blank (yes blank) and put a formula in L2 =B2=Template!$V$5 where B2 is the first data cell in the column with header AASEGNO, note that you need to use relative reference for B2 and absolute for the criteria in the template sheet -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... Hi Peo, It didn't answer my question. I think you got it all wrong. The problem was not in the "LENGTH". I want to sum up the column with the field name "LENGTH" but the problem lies in defining the criteria. I don't know how to write a criteria that one of the field name (here "AASEGNO") is equal to the some value from other sheet (here Template!V5). The four ways that I was trying to get it, only the first way works because I specify the cells NetData!L1 as AASEGNO and NetData!L2 as MTH101 which is there occurs three times in the database NetData!A1:K313). Can anybody help me out constructing this criteria in which one of the variable "AASEGNO" from the database NetData!A1:K313 is equal to some other linked cell value at Template!V5? AA "Peo Sjoblom" wrote: If you want to use the contents in Template!V5 to get a variable you can use INDIRECT but how you apply it depends on what you want to type into V5, if you want to type NetData!A1 into Template!V5 you can use =DSUM(NetData!A1:K313,INDIRECT(Template!V5),NetDat a!L1:L2) if you want to type in the criteria range into Template!V5 you can use =DSUM(NetData!A1:K313,"LENGTH",INDIRECT(Template!V 5)) with NetData!L1:L2 in V5 it will return the same as in your first example I assumed you have a header in A1, anyway INDIRECT would be the way to g -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... I have an excel sheet with three worksheets. 1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
#5
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
Dude I don't think it really answered my question.
I'll try to explain again: If I have the value in cell NetData!L1 as AASEGNO and NetData!L2 as =Template!V5 then in cell say Junk!A5 I can write the value be equal to following =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) Now in cell Junk!A6 I want something I do the same formula value =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) but now the criteria should be differently coded. So I want the value in NetData!L1 as AASEGNO (same as previous) but in NetData!L2 as =Template!V6 (note the change from V5 to V6). The way in which you are suggesting would not work. I would re-phrase my question again: How should I specify the criteria in a DSUM function in a case explained as above? This should be prettly explanable from the ways I have been struggling as follows: Case 1: Works Fine =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) Cases 2, 3 and 4: Doesn't work at all =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) Why is that I can't specify the criteria as in cases 2, 3 and 4 above? There got to be some point that I am missing? I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) "Peo Sjoblom" wrote: OK, if it would work with AASEGNO in L1 and criteria in L2 you want to know how you can replace the criteria and use V5 instead? If so leave L1 blank (yes blank) and put a formula in L2 =B2=Template!$V$5 where B2 is the first data cell in the column with header AASEGNO, note that you need to use relative reference for B2 and absolute for the criteria in the template sheet -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... Hi Peo, It didn't answer my question. I think you got it all wrong. The problem was not in the "LENGTH". I want to sum up the column with the field name "LENGTH" but the problem lies in defining the criteria. I don't know how to write a criteria that one of the field name (here "AASEGNO") is equal to the some value from other sheet (here Template!V5). The four ways that I was trying to get it, only the first way works because I specify the cells NetData!L1 as AASEGNO and NetData!L2 as MTH101 which is there occurs three times in the database NetData!A1:K313). Can anybody help me out constructing this criteria in which one of the variable "AASEGNO" from the database NetData!A1:K313 is equal to some other linked cell value at Template!V5? AA "Peo Sjoblom" wrote: If you want to use the contents in Template!V5 to get a variable you can use INDIRECT but how you apply it depends on what you want to type into V5, if you want to type NetData!A1 into Template!V5 you can use =DSUM(NetData!A1:K313,INDIRECT(Template!V5),NetDat a!L1:L2) if you want to type in the criteria range into Template!V5 you can use =DSUM(NetData!A1:K313,"LENGTH",INDIRECT(Template!V 5)) with NetData!L1:L2 in V5 it will return the same as in your first example I assumed you have a header in A1, anyway INDIRECT would be the way to g -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... I have an excel sheet with three worksheets. 1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
#6
Posted to microsoft.public.excel.worksheet.functions
|
|||
|
|||
Criteria problems in the DSUM function
I am still waiting for somebody to provide a solution to the criteria in DSUM
function. Can somebody please help? "AA" wrote: Dude I don't think it really answered my question. I'll try to explain again: If I have the value in cell NetData!L1 as AASEGNO and NetData!L2 as =Template!V5 then in cell say Junk!A5 I can write the value be equal to following =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) Now in cell Junk!A6 I want something I do the same formula value =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) but now the criteria should be differently coded. So I want the value in NetData!L1 as AASEGNO (same as previous) but in NetData!L2 as =Template!V6 (note the change from V5 to V6). The way in which you are suggesting would not work. I would re-phrase my question again: How should I specify the criteria in a DSUM function in a case explained as above? This should be prettly explanable from the ways I have been struggling as follows: Case 1: Works Fine =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) Cases 2, 3 and 4: Doesn't work at all =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) Why is that I can't specify the criteria as in cases 2, 3 and 4 above? There got to be some point that I am missing? I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) "Peo Sjoblom" wrote: OK, if it would work with AASEGNO in L1 and criteria in L2 you want to know how you can replace the criteria and use V5 instead? If so leave L1 blank (yes blank) and put a formula in L2 =B2=Template!$V$5 where B2 is the first data cell in the column with header AASEGNO, note that you need to use relative reference for B2 and absolute for the criteria in the template sheet -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... Hi Peo, It didn't answer my question. I think you got it all wrong. The problem was not in the "LENGTH". I want to sum up the column with the field name "LENGTH" but the problem lies in defining the criteria. I don't know how to write a criteria that one of the field name (here "AASEGNO") is equal to the some value from other sheet (here Template!V5). The four ways that I was trying to get it, only the first way works because I specify the cells NetData!L1 as AASEGNO and NetData!L2 as MTH101 which is there occurs three times in the database NetData!A1:K313). Can anybody help me out constructing this criteria in which one of the variable "AASEGNO" from the database NetData!A1:K313 is equal to some other linked cell value at Template!V5? AA "Peo Sjoblom" wrote: If you want to use the contents in Template!V5 to get a variable you can use INDIRECT but how you apply it depends on what you want to type into V5, if you want to type NetData!A1 into Template!V5 you can use =DSUM(NetData!A1:K313,INDIRECT(Template!V5),NetDat a!L1:L2) if you want to type in the criteria range into Template!V5 you can use =DSUM(NetData!A1:K313,"LENGTH",INDIRECT(Template!V 5)) with NetData!L1:L2 in V5 it will return the same as in your first example I assumed you have a header in A1, anyway INDIRECT would be the way to g -- Regards, Peo Sjoblom (No private emails please) "AA" wrote in message ... I have an excel sheet with three worksheets. 1. Database from which the final values is looked from ("NetData") 2. Database that provides the IDs for lookup ("Template") 3. Final sheet where the value is posted I am performing following ways for DSUM to work =DSUM(NetData!A1:K313,"LENGTH",NetData!L1:L2) =DSUM(NetData!A1:K313,"LENGTH","""AASEGNO"&"="&Tem plate!V5&"""") =DSUM(NetData!A1:K313,"LENGTH",NetData!A1=Template !V5) =DSUM(NetData!A1:K313,"LENGTH","AASEGNO"=Template! V5) The variable "Length" is being summed up. The criteria - NetData!L1:L2 works where the I have manually entered what I have being trying to do in the three other ways where I make the value NetData!L2 as to be a variable having a value that is contained in Template sheet, the only difference is that in first one I can only enter one value Template!V5. Can anybody help with why the last three ways of setting up the criteria is wrong along with the correction? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
add DSum function that functions horizontally. | Excel Worksheet Functions | |||
Function to look up largest value whose record meets criteria? | Excel Worksheet Functions | |||
Date & Time | New Users to Excel | |||
how do I isolate only one row in the criteria for the dsum functi. | Excel Worksheet Functions | |||
DSum function | Excel Worksheet Functions |