Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:ss )
Number one I am trying to enter time and date so that there will be a lapsed
time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#2
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:ss )
If you're looking for a solution, you need to do one of the following:
1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#3
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
Thank you. I will try to restate it.
"Fred Smith" wrote: If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#4
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
I am trying to enter time and date so that there will be a lapsed
time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18:52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. "Fred Smith" wrote: If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#5
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
I am trying to enter time and date so that there will be a lapsed
time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#6
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
From what I can see, you just need to format your cells the way you want.
=now() doesn't show seconds initially, but they are there. Just change the format to: mm/dd/yyyy hh:mm:ss Same with your calculation result. You likely want something like: dd hh:mm:ss If your elapsed time is more than 31 days, Excel won't go past that, so post back if you need a solution for this. Regards, Fred "Robin" wrote in message ... I am trying to enter time and date so that there will be a lapsed time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#7
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
I have tried to format the cells the way that I want.
Is there a specific order that is needed to format the cells for the date and time in mm/dd/yyyy and hh:mm:ss? I must be missing something? So are you saying that even though they are not seen it is calculating properly. Why is the subtraction of current and start , and end and start represented with a decimal instead of the true seconds? The Days could be over 31 so I would need help with this. Robin "Fred Smith" wrote: From what I can see, you just need to format your cells the way you want. =now() doesn't show seconds initially, but they are there. Just change the format to: mm/dd/yyyy hh:mm:ss Same with your calculation result. You likely want something like: dd hh:mm:ss If your elapsed time is more than 31 days, Excel won't go past that, so post back if you need a solution for this. Regards, Fred "Robin" wrote in message ... I am trying to enter time and date so that there will be a lapsed time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#8
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
Let's get the formatting down first.
Enter =now() in an empty cell. Right-click on the cell, choose Format Cells... Based on your post, you should see mm/dd/yyyy hh:mm in the Type: box Add the :ss to the format. Does this now display the date/time the way you want? If so, copy this format to your other cells. Regards, Fred "Robin" wrote in message ... I have tried to format the cells the way that I want. Is there a specific order that is needed to format the cells for the date and time in mm/dd/yyyy and hh:mm:ss? I must be missing something? So are you saying that even though they are not seen it is calculating properly. Why is the subtraction of current and start , and end and start represented with a decimal instead of the true seconds? The Days could be over 31 so I would need help with this. Robin "Fred Smith" wrote: From what I can see, you just need to format your cells the way you want. =now() doesn't show seconds initially, but they are there. Just change the format to: mm/dd/yyyy hh:mm:ss Same with your calculation result. You likely want something like: dd hh:mm:ss If your elapsed time is more than 31 days, Excel won't go past that, so post back if you need a solution for this. Regards, Fred "Robin" wrote in message ... I am trying to enter time and date so that there will be a lapsed time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#9
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
Fred, you have helped me but there is still a a problem when subtracting date and time. It gives me a 1 in the month value when it is the same month and there should be a 00 there. I have typed my method and following my method I did find another example but it is only for hours. The only thing I did differently was put it in the format of mm/dd/yy hh:mm:ss however when I have 8/21/2009 11:00:58 PM - 8/1/2009 11:00:50 PM Typed in the formula representing cells =B8-B7 It gives me this value for elapsed time 01/12/00 16:45:32 there should not be a 1 in the mm value. Fred I found this instruction in excel but do not think that it will solve my problem. Calculate elapsed time (subtract time) Elapsed time is the difference between two times. Suppose that you want to calculate the elapsed time of a practice marathon run that you started at 10:24:00 AM and that ended at 2:13:36 PM, measured to the second. Do the following: In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. Tip You can also show the results in minutes by setting the format to [m]:ss. Click OK. In cell A3, Excel displays 3:49:36 (or 229:36 if you used the format [m]:ss). Top of Page Fred I found this instruction. Calculate elapsed time (subtract time) Elapsed time is the difference between two times. Suppose that you want to calculate the elapsed time of a practice marathon run that you started at 10:24:00 AM and that ended at 2:13:36 PM, measured to the second. Do the following: In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. Tip You can also show the results in minutes by setting the format to [m]:ss. Click OK. In cell A3, Excel displays 3:49:36 (or 229:36 if you used the format [m]:ss). Top of Page I changed the format I want to display the difference in dd/mm/yy hh/mm/ss The cell values are In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. "Fred Smith" wrote: Let's get the formatting down first. Enter =now() in an empty cell. Right-click on the cell, choose Format Cells... Based on your post, you should see mm/dd/yyyy hh:mm in the Type: box Add the :ss to the format. Does this now display the date/time the way you want? If so, copy this format to your other cells. Regards, Fred "Robin" wrote in message ... I have tried to format the cells the way that I want. Is there a specific order that is needed to format the cells for the date and time in mm/dd/yyyy and hh:mm:ss? I must be missing something? So are you saying that even though they are not seen it is calculating properly. Why is the subtraction of current and start , and end and start represented with a decimal instead of the true seconds? The Days could be over 31 so I would need help with this. Robin "Fred Smith" wrote: From what I can see, you just need to format your cells the way you want. =now() doesn't show seconds initially, but they are there. Just change the format to: mm/dd/yyyy hh:mm:ss Same with your calculation result. You likely want something like: dd hh:mm:ss If your elapsed time is more than 31 days, Excel won't go past that, so post back if you need a solution for this. Regards, Fred "Robin" wrote in message ... I am trying to enter time and date so that there will be a lapsed time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
#10
Posted to microsoft.public.excel.misc
|
|||
|
|||
Date and Time (entering in the format of mm/dd/yyyy and hh:mm:
If you're going beyond 31 days, as Fred said, you'll need to do things
differently. As you've found, you can't format the difference to show mm and dd fields for months and days. You can use INT(A2-A1) to give you a number of days (format as number or general, not as date) and MOD(A2-A1,1) to give you the remaining time in [h]:mm:ss. If you want to see a difference in years and months, rather than just days, you'll have to use DATEDIF (http://www.cpearson.com/excel/datedif.aspx) but you'll need to think a little about what you consider to be the length of a month in this context. -- David Biddulph Robin wrote: Fred, you have helped me but there is still a a problem when subtracting date and time. It gives me a 1 in the month value when it is the same month and there should be a 00 there. I have typed my method and following my method I did find another example but it is only for hours. The only thing I did differently was put it in the format of mm/dd/yy hh:mm:ss however when I have 8/21/2009 11:00:58 PM - 8/1/2009 11:00:50 PM Typed in the formula representing cells =B8-B7 It gives me this value for elapsed time 01/12/00 16:45:32 there should not be a 1 in the mm value. Fred I found this instruction in excel but do not think that it will solve my problem. Calculate elapsed time (subtract time) Elapsed time is the difference between two times. Suppose that you want to calculate the elapsed time of a practice marathon run that you started at 10:24:00 AM and that ended at 2:13:36 PM, measured to the second. Do the following: In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. Tip You can also show the results in minutes by setting the format to [m]:ss. Click OK. In cell A3, Excel displays 3:49:36 (or 229:36 if you used the format [m]:ss). Top of Page Fred I found this instruction. Calculate elapsed time (subtract time) Elapsed time is the difference between two times. Suppose that you want to calculate the elapsed time of a practice marathon run that you started at 10:24:00 AM and that ended at 2:13:36 PM, measured to the second. Do the following: In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. Tip You can also show the results in minutes by setting the format to [m]:ss. Click OK. In cell A3, Excel displays 3:49:36 (or 229:36 if you used the format [m]:ss). Top of Page I changed the format I want to display the difference in dd/mm/yy hh/mm/ss The cell values are In cell A1 (or any other cell), type the end time. For example, type 10:24:00 AM. In cell A2 (or any other cell), type the start time. For example, type 2:13:36 PM. Tip Make sure that you include a space between the minute value and "AM" or "PM." In cell A3, type =A2-A1. On the Home tab, in the Cells group, click Format, and then click Format Cells. In the Format Cells dialog box, click the Number tab. Under Category, click Custom. In the Type box, type [h]:mm:ss. "Fred Smith" wrote: Let's get the formatting down first. Enter =now() in an empty cell. Right-click on the cell, choose Format Cells... Based on your post, you should see mm/dd/yyyy hh:mm in the Type: box Add the :ss to the format. Does this now display the date/time the way you want? If so, copy this format to your other cells. Regards, Fred "Robin" wrote in message ... I have tried to format the cells the way that I want. Is there a specific order that is needed to format the cells for the date and time in mm/dd/yyyy and hh:mm:ss? I must be missing something? So are you saying that even though they are not seen it is calculating properly. Why is the subtraction of current and start , and end and start represented with a decimal instead of the true seconds? The Days could be over 31 so I would need help with this. Robin "Fred Smith" wrote: From what I can see, you just need to format your cells the way you want. =now() doesn't show seconds initially, but they are there. Just change the format to: mm/dd/yyyy hh:mm:ss Same with your calculation result. You likely want something like: dd hh:mm:ss If your elapsed time is more than 31 days, Excel won't go past that, so post back if you need a solution for this. Regards, Fred "Robin" wrote in message ... I am trying to enter time and date so that there will be a lapsed time shown. I would like the time to be shown in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. 1st cell (B6) is current time =NOW() but this does not show seconds. (shows 8/13/09 18.52) 2nd cell (B7) is start time and have entered 8/1/2009 11:00:50 PM (formula shows correct but when the cell is not clicked in it shows 8/1/2009 23:00) 3rd cell (B8) is end time and have entered 8/21/2009 11:00:58 PM (formula shows correct but when the cell is not clicked in it shows 8/21/2009 23:00) 4th cell(B9) is Lapsed Time Current-Start entered =B6-B7 which gives value 11.82742604 5th cell(B10) is Lapsed time End - Start B8-B7 which gives a value of 20.00009259 Is there a way to adjust the formulas so that the date and time is in the format of mm/dd/yyyy hh:mm:ss AM or PM in a cell. Also if the Now does not show seconds is the calculation correct for seconds. If you're looking for a solution, you need to do one of the following: 1. Keep the conversation in the same thread, or 2. If you start a new thread, then you need to a complete description of your problem and the solution you want. No one can tell what you're looking for from just this post. Regards, Fred "Robin" wrote in message ... Number one I am trying to enter time and date so that there will be a lapsed time shown. The 1st choice is current time; Formula=NOW() the only problem is it does not show seconds. Is there any way to add seconds to this? have Current time cell, Start time cell, and an End time cell. to show lapsed time Example Current minus Start and End minus Start. In the format of either mm/dd/yyyy and hh:mm:ss AM or mm/dd/yyyy and hh:mm:ss in military time. Robin |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Format date dd.mm.yyyy to dd/mm/yyyy | Excel Discussion (Misc queries) | |||
change date format from dd/mm/yyyy to mm/yyyy | Excel Discussion (Misc queries) | |||
Split date from date time cells dd/mm/yyyy hh:mm. New cell dd/mm/y | Excel Discussion (Misc queries) | |||
Adding date/time in format dd/mm/yyyy hh/mm | Excel Worksheet Functions | |||
how do I change date from mm/dd/yyyy to dd:mm:yyyy format in Excel | New Users to Excel |