Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbers
Col A through D contain the data. Col E contains the formula I'm asking
about: Col A Col B Col C Col D Col E 7 6 7 2 1 4 3 2 1 4 8 10 9 8 - 5 3 2 10 3 I'd like to Col E to count consecutive improvements for each row of data starting in Col A relative to Col B, then Col B relative to Col C. Is there a way to do this? Thanks a lot! |
#2
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbers
This should do it for you, at least it works with your test cases.
Enter the formula out in column E, then extend the formula down the sheet this assumes your first row is at 2 =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(B2C2, IF(A2B2,1,0),0)+IF(C2D2,IF(B2C2,IF(A2B2,1,0),0 ),0) JLatham "SteveC" wrote: Col A through D contain the data. Col E contains the formula I'm asking about: Col A Col B Col C Col D Col E 7 6 7 2 1 4 3 2 1 4 8 10 9 8 - 5 3 2 10 3 I'd like to Col E to count consecutive improvements for each row of data starting in Col A relative to Col B, then Col B relative to Col C. Is there a way to do this? Thanks a lot! |
#3
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbe
Hi, it works great as is. Thank you!
As a follow up, how could I expand it to 8 columns A through H? And if you have time, how do you go about the process of creating all these nested functions... I tried it a few times and screwed it up. Thanks so much! "JLatham" wrote: This should do it for you, at least it works with your test cases. Enter the formula out in column E, then extend the formula down the sheet this assumes your first row is at 2 =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(B2C2, IF(A2B2,1,0),0)+IF(C2D2,IF(B2C2,IF(A2B2,1,0),0 ),0) JLatham "SteveC" wrote: Col A through D contain the data. Col E contains the formula I'm asking about: Col A Col B Col C Col D Col E 7 6 7 2 1 4 3 2 1 4 8 10 9 8 - 5 3 2 10 3 I'd like to Col E to count consecutive improvements for each row of data starting in Col A relative to Col B, then Col B relative to Col C. Is there a way to do this? Thanks a lot! |
#4
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbe
Also, saw this formula in the IF(C2<B2,IF(A2B2,1,0),0) and noticed you
didn't repeat it (you use the "<" sign instead of the "" sign and you use the "sign" for all the others. What does this accomplish with the overall formula. By the way, I extended the formula you created to this: =IF(M18N18,1,0)+IF(O18<N18,IF(M18N18,1,0),0)+IF( N18O18,IF(M18N18,1,0),0)+IF(O18P18,IF(N18O18,I F(M18N18,1,0),0),0)+IF(P18Q18,IF(O18P18,IF(N18 O18,IF(M18N18,1,0),0),0),0)+IF(Q18R18,IF(P18Q18 ,IF(O18P18,IF(N18O18,IF(M18N18,1,0),0),0),0),0) +IF(R18S18,IF(Q18R18,IF(P18Q18,IF(O18P18,IF(N1 8O18,IF(M18N18,1,0),0),0),0),0),0)+IF(S18T18,IF (R18S18,IF(Q18R18,IF(P18Q18,IF(O18P18,IF(N18O 18,IF(M18N18,1,0),0),0),0),0),0),0) And it works. But I'm wondering if it's accurate for all cases because I'm not sure what the < sign in the second nested formula does and why it's not repeated through the rest of the formula... Thanks a lot for your time! |
#5
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbe
Also wondering if there is an efficient way to use
=if(iserror(bigformula,0,bigformula) -- do I really have to input that big formula below twice? thanks again! "JLatham" wrote: This should do it for you, at least it works with your test cases. Enter the formula out in column E, then extend the formula down the sheet this assumes your first row is at 2 =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(B2C2, IF(A2B2,1,0),0)+IF(C2D2,IF(B2C2,IF(A2B2,1,0),0 ),0) JLatham "SteveC" wrote: Col A through D contain the data. Col E contains the formula I'm asking about: Col A Col B Col C Col D Col E 7 6 7 2 1 4 3 2 1 4 8 10 9 8 - 5 3 2 10 3 I'd like to Col E to count consecutive improvements for each row of data starting in Col A relative to Col B, then Col B relative to Col C. Is there a way to do this? Thanks a lot! |
#6
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
For this data in row 20, ColM - ColT
17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#7
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
SteveC, Let me look at your questions this evening so I can hopefully come up
with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#8
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Thanks Latham, there's no urgency. I''m not that good with macros, so I dont'
want you to waste your time. Then again, if this is a challenge that interests you, I would enjoy seeing it if only to learn something. Thanks again! "JLatham" wrote: SteveC, Let me look at your questions this evening so I can hopefully come up with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#9
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Here is the solution to include columns A through H. That's as far as we can
take this using nested IF() statements due to the built in limit of 7 nested functions. The first two columns are kind of special cases, as shown by your example data and result. For column A to be counted, the value in it simply needs to be greater than the value in column B. Column B needs to be both smaller than the value in column A and larger than the value in column C to count. For the rest of the series it is just a matter of back tracking to make sure that the series continues to decline in value from right to left. Any time that a value goes higher than that of the cell to the right of it, it causes failure of the test at that point. Here is the 8-column formula, split at the + symbols for easier reading: =IF(A2B2,1,0)+ IF(C2<B2,IF(A2B2,1,0),0)+ IF(A2B2,IF(B2C2,1,0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,1,0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,1,0), 0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,1,0),0),0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,IF(G2H2,1,0),0),0),0),0),0),0) Here it is again so that you can easily cut and paste it: =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(A2B2, IF(B2C2,1,0),0)+IF(A2B2,IF(B2C2,IF(C2D2,1,0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2, 1,0),0),0),0),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2 E2,IF(E2F2,IF(F2G2,1,0),0),0),0),0),0)+IF(A2B2, IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2G2,IF(G2 H2,1,0),0),0),0),0),0),0) You can pick up a sample workbook with this solution in it along with a code solution. I'm not greatly pleased with the code, it's clumsy, but it does work and it is easily modified for varying number of columns of data. Not sure how well it work with fewer than 4 columns of data. That workbook can be downloaded from my site he http://www.jlathamsite.com/uploads/SteveC_Sequences.xls - right click and 'save target as' to grab it. One thing that continues to confuse me is that a sequence like 10 9 10 you show as a count of 1, but 10 9 8 would be 3, there seems no way to get a sequence of 2? Somehow I think that the 'answer' to this riddle may be why the data in the second column has to be handled as a special case. And you can call me Jerry - most people do. "SteveC" wrote: Thanks Latham, there's no urgency. I''m not that good with macros, so I dont' want you to waste your time. Then again, if this is a challenge that interests you, I would enjoy seeing it if only to learn something. Thanks again! "JLatham" wrote: SteveC, Let me look at your questions this evening so I can hopefully come up with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#10
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Jerry, thank you for your time and for explaining your "best practices"
approach of creating the nested ifs. I adjustd the code as suggested and it works great! Regards, SteveC |
#11
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Hi,
I just noticed that the formula to count the number of consecutive improvements does not work in all cases... for example, starting from A2 to I2, 10.2% 9.8% 9.4% 9.2% 9.0% 8.7% 8.6% 7.8% 7.9% this should return a value of 7, but instead returns a value of 8. And 17.3% 15.9% 14.9% 15.4% 15.6% 16.1% 16.6% 16.6% 16.0% this should return a value of 2 consecutive improvements, but instead returns a value of 3. I tried playing around with it but can't seem to get a fix... I'll keep trying... meanwhile, any suggestions? thanks again... "JLatham" wrote: Here is the solution to include columns A through H. That's as far as we can take this using nested IF() statements due to the built in limit of 7 nested functions. The first two columns are kind of special cases, as shown by your example data and result. For column A to be counted, the value in it simply needs to be greater than the value in column B. Column B needs to be both smaller than the value in column A and larger than the value in column C to count. For the rest of the series it is just a matter of back tracking to make sure that the series continues to decline in value from right to left. Any time that a value goes higher than that of the cell to the right of it, it causes failure of the test at that point. Here is the 8-column formula, split at the + symbols for easier reading: =IF(A2B2,1,0)+ IF(C2<B2,IF(A2B2,1,0),0)+ IF(A2B2,IF(B2C2,1,0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,1,0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,1,0), 0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,1,0),0),0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,IF(G2H2,1,0),0),0),0),0),0),0) Here it is again so that you can easily cut and paste it: =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(A2B2, IF(B2C2,1,0),0)+IF(A2B2,IF(B2C2,IF(C2D2,1,0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2, 1,0),0),0),0),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2 E2,IF(E2F2,IF(F2G2,1,0),0),0),0),0),0)+IF(A2B2, IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2G2,IF(G2 H2,1,0),0),0),0),0),0),0) You can pick up a sample workbook with this solution in it along with a code solution. I'm not greatly pleased with the code, it's clumsy, but it does work and it is easily modified for varying number of columns of data. Not sure how well it work with fewer than 4 columns of data. That workbook can be downloaded from my site he http://www.jlathamsite.com/uploads/SteveC_Sequences.xls - right click and 'save target as' to grab it. One thing that continues to confuse me is that a sequence like 10 9 10 you show as a count of 1, but 10 9 8 would be 3, there seems no way to get a sequence of 2? Somehow I think that the 'answer' to this riddle may be why the data in the second column has to be handled as a special case. And you can call me Jerry - most people do. "SteveC" wrote: Thanks Latham, there's no urgency. I''m not that good with macros, so I dont' want you to waste your time. Then again, if this is a challenge that interests you, I would enjoy seeing it if only to learn something. Thanks again! "JLatham" wrote: SteveC, Let me look at your questions this evening so I can hopefully come up with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#12
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Steve, I think this goes to the question I asked in my last posting above:
"One thing that continues to confuse me is that a sequence like 10 9 10 you show as a count of 1, but 10 9 8 would be 3, there seems no way to get a sequence of 2? Somehow I think that the 'answer' to this riddle may be why the data in the second column has to be handled as a special case." Either we count the total number of values involved in the series, or we count the number of times within a series that the number decreases. What I hear you saying in this last post is that we should count the number of times the numbers decrease within the series. I'll go try and tweak it up and will let you know when I think it's correct per this latest information. "SteveC" wrote: Hi, I just noticed that the formula to count the number of consecutive improvements does not work in all cases... for example, starting from A2 to I2, 10.2% 9.8% 9.4% 9.2% 9.0% 8.7% 8.6% 7.8% 7.9% this should return a value of 7, but instead returns a value of 8. And 17.3% 15.9% 14.9% 15.4% 15.6% 16.1% 16.6% 16.6% 16.0% this should return a value of 2 consecutive improvements, but instead returns a value of 3. I tried playing around with it but can't seem to get a fix... I'll keep trying... meanwhile, any suggestions? thanks again... "JLatham" wrote: Here is the solution to include columns A through H. That's as far as we can take this using nested IF() statements due to the built in limit of 7 nested functions. The first two columns are kind of special cases, as shown by your example data and result. For column A to be counted, the value in it simply needs to be greater than the value in column B. Column B needs to be both smaller than the value in column A and larger than the value in column C to count. For the rest of the series it is just a matter of back tracking to make sure that the series continues to decline in value from right to left. Any time that a value goes higher than that of the cell to the right of it, it causes failure of the test at that point. Here is the 8-column formula, split at the + symbols for easier reading: =IF(A2B2,1,0)+ IF(C2<B2,IF(A2B2,1,0),0)+ IF(A2B2,IF(B2C2,1,0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,1,0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,1,0), 0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,1,0),0),0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,IF(G2H2,1,0),0),0),0),0),0),0) Here it is again so that you can easily cut and paste it: =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(A2B2, IF(B2C2,1,0),0)+IF(A2B2,IF(B2C2,IF(C2D2,1,0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2, 1,0),0),0),0),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2 E2,IF(E2F2,IF(F2G2,1,0),0),0),0),0),0)+IF(A2B2, IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2G2,IF(G2 H2,1,0),0),0),0),0),0),0) You can pick up a sample workbook with this solution in it along with a code solution. I'm not greatly pleased with the code, it's clumsy, but it does work and it is easily modified for varying number of columns of data. Not sure how well it work with fewer than 4 columns of data. That workbook can be downloaded from my site he http://www.jlathamsite.com/uploads/SteveC_Sequences.xls - right click and 'save target as' to grab it. One thing that continues to confuse me is that a sequence like 10 9 10 you show as a count of 1, but 10 9 8 would be 3, there seems no way to get a sequence of 2? Somehow I think that the 'answer' to this riddle may be why the data in the second column has to be handled as a special case. And you can call me Jerry - most people do. "SteveC" wrote: Thanks Latham, there's no urgency. I''m not that good with macros, so I dont' want you to waste your time. Then again, if this is a challenge that interests you, I would enjoy seeing it if only to learn something. Thanks again! "JLatham" wrote: SteveC, Let me look at your questions this evening so I can hopefully come up with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#13
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Ok, I changed both the formula(s) and the code to count the number of times
that the series 'improves' (decreases before an increase) rather than the number of points that constitute the series. Use the same link from the earlier posting to get the new copy. "SteveC" wrote: Hi, I just noticed that the formula to count the number of consecutive improvements does not work in all cases... for example, starting from A2 to I2, 10.2% 9.8% 9.4% 9.2% 9.0% 8.7% 8.6% 7.8% 7.9% this should return a value of 7, but instead returns a value of 8. And 17.3% 15.9% 14.9% 15.4% 15.6% 16.1% 16.6% 16.6% 16.0% this should return a value of 2 consecutive improvements, but instead returns a value of 3. I tried playing around with it but can't seem to get a fix... I'll keep trying... meanwhile, any suggestions? thanks again... "JLatham" wrote: Here is the solution to include columns A through H. That's as far as we can take this using nested IF() statements due to the built in limit of 7 nested functions. The first two columns are kind of special cases, as shown by your example data and result. For column A to be counted, the value in it simply needs to be greater than the value in column B. Column B needs to be both smaller than the value in column A and larger than the value in column C to count. For the rest of the series it is just a matter of back tracking to make sure that the series continues to decline in value from right to left. Any time that a value goes higher than that of the cell to the right of it, it causes failure of the test at that point. Here is the 8-column formula, split at the + symbols for easier reading: =IF(A2B2,1,0)+ IF(C2<B2,IF(A2B2,1,0),0)+ IF(A2B2,IF(B2C2,1,0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,1,0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,1,0), 0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,1,0),0),0),0),0),0)+ IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2 G2,IF(G2H2,1,0),0),0),0),0),0),0) Here it is again so that you can easily cut and paste it: =IF(A2B2,1,0)+IF(C2<B2,IF(A2B2,1,0),0)+IF(A2B2, IF(B2C2,1,0),0)+IF(A2B2,IF(B2C2,IF(C2D2,1,0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,1,0),0),0 ),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2, 1,0),0),0),0),0)+IF(A2B2,IF(B2C2,IF(C2D2,IF(D2 E2,IF(E2F2,IF(F2G2,1,0),0),0),0),0),0)+IF(A2B2, IF(B2C2,IF(C2D2,IF(D2E2,IF(E2F2,IF(F2G2,IF(G2 H2,1,0),0),0),0),0),0),0) You can pick up a sample workbook with this solution in it along with a code solution. I'm not greatly pleased with the code, it's clumsy, but it does work and it is easily modified for varying number of columns of data. Not sure how well it work with fewer than 4 columns of data. That workbook can be downloaded from my site he http://www.jlathamsite.com/uploads/SteveC_Sequences.xls - right click and 'save target as' to grab it. One thing that continues to confuse me is that a sequence like 10 9 10 you show as a count of 1, but 10 9 8 would be 3, there seems no way to get a sequence of 2? Somehow I think that the 'answer' to this riddle may be why the data in the second column has to be handled as a special case. And you can call me Jerry - most people do. "SteveC" wrote: Thanks Latham, there's no urgency. I''m not that good with macros, so I dont' want you to waste your time. Then again, if this is a challenge that interests you, I would enjoy seeing it if only to learn something. Thanks again! "JLatham" wrote: SteveC, Let me look at your questions this evening so I can hopefully come up with a one-answer-answers-all answer. We're going to be limited in the current method by the nested function limit in Excel - 7 nested functions. The basic premise of the current formula was that if the value to the right of a cell was greater than the current cell (i.e. A1 B1) then set the result to 1, otherwise set it to zero. The complication comes in when you realize that any time the constant decrease in values from left to right is interrupted that you don't/can't count any further at all even if you have an apparent valid sequence later on: the 10 7 10 9 situation: the second 10 nullifies any further 'valid' sequences. If you don't mind working with VBA macros, I think it would be easier to code up a generic solution to this problem than to try to extend the logic through nested IF statements. Besides, nested IF's give me a headache <g "SteveC" wrote: For this data in row 20, ColM - ColT 17.7% 16.5% 15.2% 14.8% 14.3% 12.5% #DIV/0! #DIV/0! #DIV/0! this formula: =IF(M20N20,1,0)+IF(O20<N20,IF(M20N20,1,0),0)+IF( N20O20,IF(M20N20,1,0),0)+IF(O20P20,IF(N20O20,I F(M20N20,1,0),0),0)+IF(P20Q20,IF(O20P20,IF(N20 O20,IF(M20N20,1,0),0),0),0)+IF(Q20R20,IF(P20Q20 ,IF(O20P20,IF(N20O20,IF(M20N20,1,0),0),0),0),0) +IF(R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N2 0O20,IF(M20N20,1,0),0),0),0),0),0)+IF(S20T20,IF (R20S20,IF(Q20R20,IF(P20Q20,IF(O20P20,IF(N20O 20,IF(M20N20,1,0),0),0),0),0),0),0) returns an error Is there away to still count the consecutive improvements in the first few columns? The prior post where I suggested returning a 0 if an error is discovered wouldn't work... |
#14
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
Hi Jerry, thanks for your response. Last month I applied your formula and I
tested it with a few examples, and it seemed fine so I didn't fully test it. To belatedly answer your question: a sequence of 10 9 10 -- count equals 1 a sequence of 10 9 8 -- count equals 3 my comment: yep seems no way to get a sequence of 2... my comment: yeah, I just noticed :) I do not think the second column has to be handled a special case. I just need to count consecutive improvements. It's easy to do if you substitute "109" as "Yes" and "910" as "No". Then you only have to count the number of consecutive "Yes." But the only way I know how to do that is add "helper columns" -- see this for example: http://www.microsoft.com/office/comm...=en-us&m=1&p=1 But I thought it would be great if it could be done within a single cell... Thanks a lot for your time and advice... I've learned a lot over the past few weeks... SteveC |
#15
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
http://www.jlathamsite.com/uploads/SteveC_Sequences.xls
Jerry, very much for posting the above link with a standalone formula and an associated macro. The formula works perfectly now! Very nice work with the macro too; I'll study that approach as well. Thanks again for your time. |
#16
Posted to microsoft.public.excel.misc
|
|||
|
|||
Ignoring error in cells
The formula has reached it's limit at this point - or is only one away from
the limit of 7 nested functions, so the code is the way to go if you have data extending out past column H (assuming start in A). "SteveC" wrote: http://www.jlathamsite.com/uploads/SteveC_Sequences.xls Jerry, very much for posting the above link with a standalone formula and an associated macro. The formula works perfectly now! Very nice work with the macro too; I'll study that approach as well. Thanks again for your time. |
#17
Posted to microsoft.public.excel.misc
|
|||
|
|||
Using Countif to Count Consecutive Relative Increases in Numbers
Sorry for the "late" solution !
For the range A10:H10 this array formula: {=MIN(IF(A10:G10 <= B10:H10, COLUMN(A10:G10) - COLUMN(A10), COLUMNS(A10:G10)))} should give the right result, and it is not limited in size... -- Festina Lente "SteveC" wrote: Col A through D contain the data. Col E contains the formula I'm asking about: Col A Col B Col C Col D Col E 7 6 7 2 1 4 3 2 1 4 8 10 9 8 - 5 3 2 10 3 I'd like to Col E to count consecutive improvements for each row of data starting in Col A relative to Col B, then Col B relative to Col C. Is there a way to do this? Thanks a lot! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Return Summed Count of Multiple Consecutive Numeric Values | Excel Worksheet Functions | |||
Count Intervals of 2 Consecutive Values in same Row and Return Count across Row | Excel Worksheet Functions | |||
How do I add consecutive numbers but start over at break in the. | Excel Discussion (Misc queries) | |||
How do I add consecutive numbers but start over at a break in the. | Excel Discussion (Misc queries) | |||
How do I add consecutive numbers but start over at a break in the. | Excel Discussion (Misc queries) |